Q: How to turn on the LED light? How to switch
modes?
A: After powering on, wait for 2 seconds, press
and hold the "UNIT" button for 2 seconds to
turn on the LED light, and then press the "UNIT"
button for 2 seconds to switch to SOS mode.
Q: Will the Tyre Inflator stop at the preset
pressure reached?
A: Of course, the air pump will work under the
pressure value you set, and will automatically
stop after reaching the preset value to avoid
over-inflation. If your preset value is greater
than the bearing value of the tire (equipment),
the real-time pressure value of the air pump will
fluctuate up and down a certain value, you need
to stop it manually. (It is recommended to check
the tire pressure value in advance when setting
the preset value).
Q: Can I use it to measure tire pressure?
A: No, our air pump is a device for inflating and
replenishing, and cannot be used as a
measuring instrument for tire pressure.
Q: Is the sound of the air pump loud when it is
in use?
A: Our air pump is a tool motor with a certain
working performance and has a certain working
noise, but it can maintain a distance of 1 meter
away during operation, and the decibel is about
65dB. For example, the decibel within 1 meter is
