
Cobalt 3000 - Quick Start Guide
1.
2.
3.
4.
6.
7.
8.
ncrat
the unit and place it on a stable
work surface.
Do not plug the USB in yet.
Install the software from the CD provided.
Start with Lasercad
Then install the 64bit USB driver
Install Teamviwer 8 (we'll need that for remote
training and support.) Use only version 8.
Plug in the USB connections
*Only use the USB cord provided.
Longer USB cables may have trouble
communication problems.
Rev.B Call Inkcups Now for remote training once you have set up your laser 978-646-8980
5.
RX-4 Exhaust Unit (optional)
If you have purchased the RX-4 exhaust
unit, then plug the remote on plug into the
back of the laser system.
You must provide powered ventilation to
the laser of at least 110cfm. Either vent to
the outside or provide HEPA filtration if
venting inside.
* Failure to properly vent the laser
will void the warranty for any
damage resulting
.
ouble click on the software icon
located on the desktop. If you are now
logged in as someone else, you can find
the program here:
C:\LaserCAD\AWCPrograms\LaserCAD.exe
urn t
e
aser on us
n
t
e power sw
tc
ocated on the back of the unit
Import
our
raphic fil
aserCad work area
Settin
s for plate depth
Sendin
the file to the laser