InfiRay AT1280H Series Manuel utilisateur
AT1280H Series
InfiRay Intelligent Infrared Temperature Screening System
Operation Manual
V1.0.0
Yantai IRay Technology Co., Ltd.
V1.0.0 II
Yantai IRay Technology Co., Ltd.
11th Guiyang Street, YEDA
Yantai 264006, P. R. China
Version History
Version
Date
Description
Revised by
Checked by
V1.0.0
2020-8-4
Initial version
Wu Changhao
Lin Wenjuan
Lu Fengjuan
Application Range
“Intelligent Infrared Temperature Screening System Operation Manual”mainly
introduces the method of using the software of the intelligent infrared temperature
screening system when the AT1280H series of module is used, including
environmental parameter configuration, system configuration, shielding area
configuration, temperature measurement mode configuration, imaging display,
temperature analysis, and other operations.
Preparations
1. A computer equipped with " Intelligent Infrared Temperature Screening System
Software ";
⚫The computer should meet the following requirements:
⚫Transmit buffers and receive buffers could set the max value 2048, giant frame
packets could set the max 9014 bytes.
⚫The detailed location is:
⚫Network→Property→Ethernet→Configuration→Advanced→Find transmit buffers,
receive buffers and giant frame packets
V1.0.0 III
Yantai IRay Technology Co., Ltd.
11th Guiyang Street, YEDA
Yantai 264006, P. R. China
V1.0.0 IV
Yantai IRay Technology Co., Ltd.
11th Guiyang Street, YEDA
Yantai 264006, P. R. China
2. A dedicated cable for normal product connection;
3. A monitor or other compatible display equipment
V1.0.0 1
Yantai IRay Technology Co., Ltd.
11th Guiyang Street, YEDA
Yantai 264006, P. R. China
1. Software Connection
Firstly, connect the product with specific cable to the PC. Then, connect the software
according to the following steps:
1. Double click on the “IRAYBodyTemperatureScreening” application icon, and
camera connection interface will pop out as shown in Figure 1.2.
Figure 1.1 System software operation icon
V1.0.0 2
Yantai IRay Technology Co., Ltd.
11th Guiyang Street, YEDA
Yantai 264006, P. R. China
Figure 1.2 The system software connection setting interface
Calibration: device shutter correction
Change color pallete: switch the image palette
/Focus - and focus +: fine focus
Auto focus: auto focus
Celsius: switch the temperature unit to Celsius
Fahrenheit: switch the temperature unit to Fahrenheit
Kelvin: switch the temperature unit to kelvin
Set the measurement rectangle: mark the rectangular area on the image
Remove measurement tool: delete the marked rectangular area
Whole frame temperature measurement switch: turn on and off whole frame
V1.0.0 3
Yantai IRay Technology Co., Ltd.
11th Guiyang Street, YEDA
Yantai 264006, P. R. China
temperature measurement
Select drawing color: Select the color of the brush to mark the temperature
measuring area
Temperature mode switch: standard and human body
Capture:turn on and off face mode
Alarm ring switch: turn on and off the alarm ring
Alarm pop-up switch: turn on and off the alarm window
Alarm snap switch: turn on and off alarm snap
Picture: Click this button to take a picture of current imaging
Video: Click this button to start record a video, and click again to stop recording
2. In the connection setting interface as shown in figure 1.2, click the connection
button and the connection interface will pop up as shown in figure 1.3.
Please click “Search”to conduct automatic search after choosing “P”, then PC
Software will search for IP automatically.
Figure 1.3 The system software connection interface
V1.0.0 4
Yantai IRay Technology Co., Ltd.
11th Guiyang Street, YEDA
Yantai 264006, P. R. China
3. After selecting the IP of the device to be connected, click the “Connect” button and
the login page will pop up as shown in Figure 1.4. After entering the correct password
(password: admini), click login to image and conduct temperature screening analysis.
The user must change the password when conducting the first login.
Figure 1.4 System software login interface
4. The user can change the login password on the login interface, click “P/W change”
button, the interface like figure1.5 will pop up.
Figure1.5 Password change interface of system software
5. In the upper right corner of the home page, you can click the language button to
switch the display language of the system software, as shown in Figure 1.6.
V1.0.0 5
Yantai IRay Technology Co., Ltd.
11th Guiyang Street, YEDA
Yantai 264006, P. R. China
Figure 1.6 System software language selection interface
2．Setting
Click the Setting button, and the Setting page will pop up as shown in figure 2.1.
Figure 2.1 The system software setting interface
Autres manuels InfiRay Caméra thermique
InfiRay
InfiRay M200 Series Manuel utilisateur
InfiRay
InfiRay AT31F Manuel utilisateur
InfiRay
InfiRay Xmini Manuel utilisateur
InfiRay
InfiRay P Series Manuel utilisateur
InfiRay
InfiRay ZOOM ZL38 Manuel utilisateur
InfiRay
InfiRay Night Vision Go Manuel utilisateur
InfiRay
InfiRay PT2 Manuel utilisateur
InfiRay
InfiRay Geni Series Manuel utilisateur
InfiRay
InfiRay PT Series Manuel utilisateur
InfiRay
InfiRay AT1280 Manuel utilisateur
InfiRay
InfiRay AT Series Manuel utilisateur
InfiRay
InfiRay AT300 Series Manuel utilisateur
InfiRay
InfiRay AT31 Manuel utilisateur
InfiRay
InfiRay AT300 Series Manuel utilisateur
InfiRay
InfiRay FINDER FH35R Manuel utilisateur
InfiRay
InfiRay T Series Manuel utilisateur
InfiRay
InfiRay Tube SE Series Manuel utilisateur
InfiRay
InfiRay Tianxuan M20 Series Manuel utilisateur
InfiRay
InfiRay iRay RH25 Manuel utilisateur
InfiRay
InfiRay ITSII 300 Manuel d'instructions
