Infinova V3062 Series Instructions d'installation

V3062 Series

Embedded Network Digital Video Recorder

Installation/Operation Instructions

This manual is applicable for the installation and operation of Infinova V3062 series Embedded

Network Digital Video Recorders.

Infinova V3062 Series DVR integrates advanced video compression and storage technologies, with 4-ch

analog video inputs, 4-ch full H.264 video encoding and G711 audio encoding. It supports synchronal

audio inputs, USB2.0 high-speed backup, and mouse operations.

The functional DVR can be widely used in security surveillance for small shops, band ATMs, public

security, telecommunication, traffic, and education etc.

Notice

This manual may not be reproduced in any form or by any means to create any derivative such as translation, transformation, or adaptation

without the prior written permission of Infinova.

Infinova reserves the right to change this manual and the specifications without prior notice. The most recent product specifications and

user documentation for all Infinova products are available on our website www.infinova.com

Trademarks

Infinova

®is a trademark of Infinova.

All other trademarks that may appear belong to their respective proprietors.

FCC Warning

V3062 series Network Digital Video Recorders all comply with Part 15 of the FCC rules.

Operation is subject to the following two conditions.

yThis device may not cause harmful interference.

yThis device must accept any interference received, including interference that may cause undesired operation.

V3062 series Network Digital Video Recorders have been tested and found to comply with the limits for Class A digital device, pursuant to

Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is

operated in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation.

Read this manual carefully before installation. This manual should be saved for future use.

Important Safety Instructions and Warnings

zElectronic devices must be kept away from water, fire or high magnetic radiation.

zClean with a dry cloth.

zProvide adequate ventilation.

zUnplug the power supply when the device is not to be used for an extended period of time.

zOnly use components and parts recommended by manufacturer.

zPosition power source and related wires to assure they will be kept away from ground and access way.

zRefer all service matters to qualified personnel.

zSave product packaging to ensure availability of proper shipping containers for future transportation.

Indicates that the un-insulated components within the product may carry a voltage harmful to humans.

Indicates operations that should be conducted in strict compliance with instructions and guidelines contained in this manual.



Use at altitude below 2000m.



Use in nontropical areas.

Warning: To avoid risk of fire and electric shock, keep indoor products away from rain and moisture!

Related Documentations

y<V3062 Series Embedded DVR Quick Operation Guide>

Install Environment and Notes

Install Environment

zWorking temperature of DVR: 0ć~50ćˈstorage temperature -20ć~70ć.

zDVR should be placed flatly during installation or operation, avoid slantways or inversed placement.

zAvoid placement and installation in high temperature and high humidity.

zFor better heat-radiation, cooling fan is designed inside the DVR. Further, install the device in the place with good ventilation and

dust-free condition.

zTo ensure a better heat-radiation, the distance between the DVR back panel and the other devices or the wall should be more than 6CM.

zDo not move DVR in the place with sharp temperature contrast to avoid condensation inside the device which will shorten the lifespan

of the machine.

zInstall the thunder protection devices for the DVR applied in thundery areas to prevent the thunder-caused hardware damages.

Notes

zDon't touch the power switch or DVR with wet hands or wet stuff.

zAfter the installation, to avoid the interference of the video/audio signals and the damages caused by the static electricity, please make

sure that DVR and the housing are well grounded (refer to the grounding interface on the rear panel).

zMake sure that the voltage of the power supply is stable.

zAvoid splashing down the liquid or metal on DVR, which may cause short circuit even fire inside DVR.

zInstall the harddisk correctly before use, or else, you can't make any record operation.

zThe dust of the mainboard may cause short circuit after being damped, therefore, to maintain a long life usage of the device, please clean

the mainboard, inserts, housing and cooling fan regularly.

zTry not to apply TV set at the local video output interface (VIDEO OUT), otherwise, the output circuit of the DVR (VIDEO OUT) is apt

to damages.

zWhen shut down the DVR, do not turn off the power switch directly. Please firstly close the current recording, then complete the

software shut down via menu, and at last close the power switch on the rear panel. In this way, the possible hardware damages are

avoided.

zDVR is able to auto-check the harddisk, when a new harddisk without formatting or a nonsupport file system of the harddisk, system

will alarm to user, the record could be taken only after the harddisk is formatted. If the harddisk has been used before and meanwhile it

has subareas record, please delete the subareas on PC first, and then format the harddisk in DVR. Otherwise, the normal record will be

influenced.

zDo not conduct the hardware hot-swapping operation with electricity. (Except the hardware supporting hot-swapping)

zChange the damaged harddisk to insure the integrality of the record data (The information of the harddisk error is in the log)

zIt's better to use the recommended HDDs only. Please visit below link for the list of the HDDs recommended by Infinova:

http://www.infinova.com/admin/product/PDF/ListofRecommendedDVRBackupDevices.pdf.

Table of Contents

Chapter 1 System Overview ......................................................... 1

1.1 Product Description ..............................................................1

1.2 Front Panel Introduction .......................................................2

1.3 Remote Controller Introduction ............................................4

Chapter 2 Installation and Connection........................................ 6

2.1 Counter-check Device and Accessories.................................6

2.2 Install Hard Disk................................................................... 6

2.3 Rear Panel Introduction ........................................................7

2.4 Alarm Input/output Connection Method Introduction...........8

2.5 Ethernet Connection Cable Making Method.........................8

2.6 RS-485 Pan/Tilt Decoder ...................................................... 9

Chapter 3 System Menu Introduction ......................................... 9

3.1 Menu Operation ....................................................................9

3.1.1 Cursor Switching.........................................................10

3.1.2 Option Box..................................................................10

3.1.3 List Box.......................................................................10

3.1.4 Editing Box .................................................................10

3.1.5 Buttons ........................................................................ 11

3.1.6 Input Method............................................................... 11

3.1.7 Statusbar Introduction ................................................. 11

3.2 Menu Structure....................................................................12

Chapter 4 Main Functions Introduction.................................... 13

4.1 Turn on DVR ......................................................................13

4.2 User Login and Authority ...................................................13

4.2.1 User Login...................................................................13

4.2.2 User Authority.............................................................14

4.3 Preview ...............................................................................14

4.3.1 Switch Preview Modes................................................ 14

4.3.2 Preview Setting ...........................................................15

4.4 PTZ Control........................................................................15

4.4.1 PTZ Parameters Setting............................................... 15

4.4.2 PTZ Control ................................................................ 16

4.4.3 Set and Call Preset....................................................... 16

4.4.4 Set and Call Pattern..................................................... 16

4.5 Alarm.................................................................................. 16

4.5.1 Channel Alarm ............................................................ 16

4.5.2 Alarm Input ................................................................. 18

4.5.3 Exception Alarm.......................................................... 19

4.6 Alarm Management............................................................. 19

4.7 Recording............................................................................ 19

4.7.1 Manual Recording....................................................... 19

4.7.2 Scheduled Recording................................................... 20

4.7.3 Alarm Recording ......................................................... 21

4.8 Playback.............................................................................. 21

4.9 Power Off............................................................................ 22

Chapter 5 Other Settings ............................................................ 23

5.1 Preview Settings ................................................................. 23

5.2 Network Settings ................................................................ 24

5.3 Serial Port Settings..............................................................25

5.4 User Management............................................................... 25

5.5 System Settings................................................................... 26

5.5.1 Display Settings .......................................................... 26

5.5.2 Time Settings............................................................... 27

5.5.3 Log Management ........................................................ 27

5.5.4 Hard Disk Management .............................................. 28

5.5.5 Data Backup................................................................ 28

5.5.6 Advanced Settings....................................................... 29

5.5.7 General Channel Settings............................................ 29

5.5.8 Bi-directional Audio Talk-back ................................... 29

Chapter 1 System Overview

1.1 Product Description

Infinova's V3062 series new-generation network digital video

recorder is integrated multiple advanced information technologies

and manufactured under strict quality control system. The DVR

supports 4-channel analog video inputs and 4-channel full D1

H.264 video compression and G.711 audio compression, providing

synchronous video and audio input. USB2.0 high speed backup and

mouse device operations are also supported. V3062 series DVR is

ideal for the monitoring of small shops, ATM banks, and can be

widely adopted in fields like public security, telecom, traffic, power

station, education etc.

Features

yEmploy high performance Power PC structure and embedded

Linux operating system

yPAL/NTSC format video signal supported

yH.264 video compression

yG.711A audio compression

y4-ch full D1 encoding, each channel supports dual streams

yMaximum support 4-ch D1 video synchronal playback

yVideo encoding parameters for each channel is independent

and adjustable, including resolution, frame rate, bit rate, image

quality etc.

ySupport compound stream and video stream encoding, with

audio and video synchronal in compound stream encoding

y1-ch HD VGA and CVBS main/auxiliary output, VGA video

resolution: 800×600 @ 60Hz, 1024×768 @ 60Hz, 1280×1024

@ 60Hz, 1366×768 @ 60Hz, 1440×900 @ 60Hz, 800×600 @

75Hz, 1024×768 @ 75Hz

ySupport 1/4 screen preview, with sequence of channels

adjustable

ySupport live view group switch, manual switch and automatic

cycle, the interval of automatic cycle can be adjusted

ySupport playback zoom in electronically; mouse clicking pan,

zoom area

yScreen out designated channel

ySupport motion detection, video loss, video mask detection

and video privacy mask

yCompatible with multiple control protocols of leading encoder,

support preset and pattern

ySupport zoom-in function by mouse operation when control

Infinova second generation domes

yMaximum 2 SATA hard disks supported, maximum 2TB for

each hard disk

yHard disk sleep

yThe exported file formats are compatible with Windows. Hard

disk space pre-allocation technology is adopted to avoid disk

patch

yRecording activation mode including manual, scheduled,

alarm triggered

ySwitch signal input alarm/motion detection pre-record and

post-record functionality

y48 recording time sections per day, and recording activation

mode can be varied for each time section

ySearch recording files via time, channel number and recording

type; forward and backward play modes are available

ySupport playback on two monitors

yUSB2.0 port for external hard disks and mouse devices

y4 alarm inputs and 2 relay outputs

ySupport video loss, motion detection, video mask, illegal visit,

network break, hard disk full, and IP conflict alarms,

associating to multiple alarm outputs

yAudible warning, uploading to control center, activating alarm

output etc. Optional in alarm. And alarm preview is supported

ySelf-recovery when system run abnormally

ySupport operations via front panel keys, mouse, remote

controller etc.

yTwo levels access management

ySupport password authentication logon

yLog and search function

yLocal storage

ySupport SNMP

yTwo access modes: local and network

yLocal or remote control of PTZ systems or domes

y1 10M/100M/1000M self-adaptive network port

yBuilt-in TCP/IP, UDP, PPPoE, DHCP, etc. network protocols,

ADSL (PPPoE) dialing

ySupport remote search, recording, transmission and live

monitoring can be performed simultaneously while searching

ySupport intercom

yPerform almost all functions via client software, including live

view the video of any channel, check device status, set system

parameters, PTZ control, remote search of recording files,

playback and download, system upgrade, reboot and shutdown

yUpdate software through USB

yPower off protection, self-recovery while powering on

1.2 Front Panel Introduction

Figure 1-1 Front panel

No. Name Type Description

1CH1~CH4

Channel

status

indicator

Channel 1~4 status indication, "Green" indicates recording is ongoing, "red" indicates

net transfer is ongoing, "orange" indicates both recording and net transfer are ongoing

READY Status

indicator Green: DVR is ready to work

HDD Status

indicator Red flickering: hard disk is running

TX/RX Status

indicator Orange flickering: transmitting/receiving data

STATUS Status

indicator

Green: DVR is being controlled by remote controller;

Red: DVR is in PTZ control status (Note: the dome will be under menu controlled status

when it is controlled via GUI menu, not PTZ control status);

Orange: DVR is in PTZ control status and is being controlled by remote controller;

Off: Neither the DVR is in PTZ control status nor being controlled by remote controller

POWER Power

indicator

Green indicates the device is running, and Red indicates the DVR is powered but not in

work, grey of indicator represents the power switch on the DVR rear panel is off or the

power cord is plugged out.

3Number key

Ǐ0ǐ~Ǐ9ǐInput key

(1) Input information (Ǐ0ǐ~Ǐ9ǐ: including number, capital letters, lowercase letters,

symbols);

(2) Switch channel in “Preview” and “PTZ control” modes: input Ǐ1ǐto switch to the

channel 1, and so as the other channels.;

(3) Call up presets when used with the buttonǏPRSTǐ

ǏMENUǐFunction

key

(1) Switch from preview interface to menu operation interface;

(2) Turn on/off the sound in the operations of the front panel buttons (pressing for 3

seconds);

(3) Enable/disable the screen wiper in “PTZ control”;

(4) Display/hide the tool column in playback

ǏPLAYǐControl key (1) Switch from preview interface to video records searching interface

(2) In “PTZ control”, start the autopan. Press any of the dome control buttons (including

the directional buttons, ǏIRIS-ǐ, ǏIRIS+ǐ, ǏWIDEǐ, ǏTELEǐ, ǏPTZǐ, Ǐ⬄ǐ,

Table des matières

Autres manuels Infinova Matériel réseau

Infinova

Infinova V3070-8 Series Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur