Impex PM-4510 Manuel utilisateur

NOTE:

Please read all instructions

carefully before using this

product

Table of Contents

Safety Notice

Important Assembly

Information

Care and Maintenance

Parts List

Warranty

Ordering Parts

Model

PM-4510

Retain This

Manual for

Reference

130301

OWNER'S

MANUAL

MARCY®PRO CIRCUIT TRAINER

PM-4510

IMPORTANT: Please read this manual before commencing

assembly of this product.

IMPEX®INC.

2801 S. Towne Ave, Pomona, CA 91766

Tel: (800) 999-8899

www.impex-fitness.com

[email protected]

©IMPEX INC. www.impex-fitness.com

TABLE OF CONTENTS

BEFORE YOU BEGIN....................................................................................…………1

IMPORTANT SAFETY NOTICES...................................................................……….. 2

EXERCISE GUIDELINES…………………………………………………………………. 3

WARNING LABEL PLACEMENT.....….....................................................................…5

IMPORTANT ASSEMBLY INFORMATION..................................................................6

OPERATION NOTES……………………………………………………………………….. 7

CARE AND MAINTANENCE, WEIGHT CAPACITY, OPERATING NOTES ………… 8

PARTS LIST…………………………………………………………………………………. 9

EXPLODED DIAGRAM………………………………………………………………………12

COMBINATION LOCK SET UP INSTRUCTION………………………………………… 13

WEIGHT RESISTNACE CHART………………………………………………………….. 14

WARRANTY.................................................................................................…………. 15

ORDERING PARTS.......................................................................................…………15

BEFORE YOU BEGIN

Thank you for selecting the MARCY PRO HOME GYM PM-4510 by IMPEX®

INC. For your safety and benefit, read this manual carefully before using the

equipment. As a manufacturer, we are committed to provide you complete

customer satisfaction. If you have any questions, or find there are missing or

damaged parts, we guarantee you complete satisfaction through direct

assistance from our factory. To avoid unnecessary delays, please call our

TOLL-FREE customer service number. Our Customer Service Agents will

provide immediate assistance to you.

Toll-Free Customer Service Number

1-800-999-8899

Mon. – Fri. 9 a.m. – 5 p.m. PST

www.impex-fitness.com

[email protected]

©IMPEX INC. www.impex-fitness.com

IMPRTANT SAFETY NOTICES

This exercise equipment is built for optimum safety. However, certain precautions apply

whenever you operate a piece of exercise equipment. Be sure to read the entire manual

before you assemble or operate your equipment. In particular, note the following safety

precautions:

1. Keep children and pets away from the equipment at all times. DO NOT

leave children unattended in the same room with the equipment.

2. Only one person at a time should use the equipment.

3. If the user experiences dizziness, nausea, chest pain, or any other abnormal

symptoms, STOP the workout at once. CONSULT A PHYSICIAN

IMMEDIATELY.

4. Position the equipment on a clear, leveled surface. DO NOT use the equipment

near water or outdoors.

5. Keep hands away from all moving parts.

6. Always wear appropriate workout clothing when exercising. DO NOT wear

robes or other clothing that could become caught in the equipment. Running

or aerobic shoes are also required when using the equipment.

7. Use the equipment only for its intended use as described in this manual. DO

NOT use attachments not recommended by the manufacturer.

8. Do not place any sharp object around the equipment.

9. Disabled person should not use the equipment.

10. Before using the equipment to exercise, always do stretching exercises to

properly warm up.

11. Never operate the equipment if the equipment is not functioning properly.

12. A spotter is recommended during exercise.

13. This equipment is designed and intended for home and consumer use only, not for

commercial use.

WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR

PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE

OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL

INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC. ASSUMES

NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE

SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT.

SAVE THESE INSTRUCTIONS.

©IMPEX INC. www.impex-fitness.com

EXECISE GUIDELINES

Building Muscle and Gaining Weight

Unlike aerobic exercise, which emphasizes endurance training, anaerobic exercise focuses on

strength training. A gradual weight gain can occur while building the size and strength of muscles.

While developing muscle mass, your body adapts to the stress placed upon it. You can modify your

diet to include foods such as meat, fish and vegetables. These foods help muscles recover and

replenish important nutrients after a strenuous workout.

Muscle Strength and Endurance

To achieve the greatest benefit from exercise, it is important to develop an exercise program that

allows you to work all of the major muscle groups equally.

To increase muscles strength; follow this principle:

Increasing resistance and maintaining the number of repetitions of an exercise results in increased

muscle strength.

To tone your body, follow the principle: Decreasing resistance plus increasing the number of

repetitions of an exercise results in increased body tone.

Once you feel comfortable with an exercise, you can change the resistance, the number of

repetitions, or the speed at which you do the exercise. It is not necessary to change all three

variables. For example, let’s say that you are training at 50 lbs and performing the exercise 10 times

in 3 minutes. When this becomes too easy, you may decide to move up lifting 60 lbs for the same

number of repetitions in the same amount of time. Lifting more weights fewer times most often

develops muscle strength. To gain both muscle strength and endurance, it is recommended that you

perform each exercise 15 to 20 reps per set.

Training Intensity

How hard you begin to train depends on your overall level of fitness. The soreness you experienced

can be lessened by decreasing the load you place on your muscles and by performing fewer sets. To

avoid injury, you should gradually work into an exercise program and set the load to your individual

fitness level. The load should increase as your fitness level increases.

Muscle soreness is common, especially when you first start exercising. If you are painfully sore for a

long time, it may be time to change your program. Eventually, your muscle system will become

accustomed to the stress and strain placed on it.

Beginning a Strength Building Program

Warming Up

To begin strength training, it is important to stretch and perform light exercise for 5 to 10 minutes.

This helps prepare the body for more strenuous exercise by increasing circulation, raising your body

temperature and developing more oxygen to your muscles.

©IMPEX INC. www.impex-fitness.com

Workout

Each workout to keep in mind that muscle soreness that lasts for a long period in not desirable and

may mean that injury has occurred.

Cool Down

At the end of each workout, perform slow stretching exercises for 5 to 10 minutes. Ease into each

stretch only going as far as you can. This stage allows your muscles wind down after training.

To provide a total workout program it is also recommended that 2 to 3 days of aerobic exercise is

performed in addition to the strength training.

Drinking Water

For the body to function properly, it must be properly hydrated. If you are exercising, you should

increase your fluid intake. The reason for this is that the water you take in will leave your system

through the sweating mechanism that cools your body during exercise. The water you lose through

exercise must be replaced so that the muscles can recover properly.

Rest Day

Although you may not feel like doing it, taking a rest day at least once a week is important because it

gives you body a chance to heal it self. Continuously working your muscle will result in over training

which will not benefit in the long run.

WARNING LABEL PLACEMENT

©IMPEX INC. www.impex-fitness.com

The warning labels shown here have been placed on the Base and Vertical Frame. If the labels are missing or

illegible, please call customer service at 1-800-888-8899 for replacements. Apply the labels in the location

shown.

IMPORTANT ASSEMBLY INFORMATION

Tools Required for Assembling the Bench: Two Adjustable Wrenches and Allen

Wrenches.

NOTE: It is strongly recommended that this equipment is assembled by two or more

people to avoid possible injury.

Ensure Carriage Bolts are inserted through the SQUARE holes on components that need to

be assembled. Attach washer only to end of the Carriage Bolt.

Use Allen Bolts or Hex Bolts inserted through the ROUND hole on components that need to

be assembled.

Always wait until all bolts are assembled onto the bench before tightening the bolts. Do not

tighten each bolt right after it is installed

Fasten Nuts and Bolts

Securely tighten all Nuts and Bolts after all

components have been assembled in current and

previous steps.

NOTE: Do not over tighten any component with

pivoting function.

Make sure all pivoting components are able to move

freely.

Do not tighten all Nuts and Bolts in this step.

Guide Rod Installation

©IMPEX INC. www.impex-fitness.com

The Guide Rods (#19) has holes on the rod to lock the weight stack when

not in use. The shorter end of the guide rod with the lock hole will need

to be pointed downwards towards the Guide Rod Base (#8

Weight Plate Installation

Slide weight plates onto Guide Rod from top to bottom. The deep

groove on each weight plate needs to face front and

downwards.

©IMPEX INC. www.impex-fitness.com

Deep Groove

OPERATION NOTES

Weight Plate Selection

1. Use the Weight Selector Pin to select the number of weight plates to exercise.

2. Do not insert weight selector pin while the weight stack or top plate is in elevated position.

3. Be certain the weight Selector Pin is completely inserted.

4. Each Weight Plate weights approximately 10lbs.

5. Please refer to Weight Resistance Chart page.

6. Never use dumbbells or other means to increase the weight resistance. Use only weight plates

provided by manufacturer.

7. For safety purpose while the equipment is not in use. Insert the Lock Pin into the hole

on Guide Rod, and use Combination Lock to lock the Pin to prevent the movement of

Weight Plates. Please refer to the Combination Lock set up.

Cable Tension Adjustment

Adjust the tension of the Cable System by installingthe head of Bench

Press Cable (#61) to the hole on the Single Floating Pulley Bracket (#25).

If the tension is too loose, move up the Cable head by one hole.

If the tension is too tight, move the Cable head down by one hole.

©IMPEX INC. www.impex-fitness.com

CARE AND MAINTENANCE

1. Lubricate moving parts with WD-40 or light oil periodically.

2. Inspect and tighten all parts before using the equipment.

3. The equipment can be cleaned using a damp cloth and mild non-abrasive detergent.

DO NOT use solvents.

4. Examine the equipment regularly for signs of damages or wear.

5. Replace any defective components immediately and/or keep the equipment out of use until

repair.

6. Failure to examine regularly may affect the safety level of the equipment.

WEIGHT CAPACITY AND DIMENSION

1. Maximum user weight: 300 lbs.

2. Assembled Dimension: 57” x 54” x 86”

©IMPEX INC. www.impex-fitness.com

PM-4510 PARTS LIST

PART NO DESCRIPTION SIZE QUANTITY

1 Base Frame 1

2 Lower Vertical Frame 1

3 Upper Vertical Frame 1

4 Lat Bar Pulley Assembly 1

5 Seat Diagonal Support Frame 1

6 Seat Support 1

7 Base Connecting Frame 1

8 Guide Rod Base 1

9 Guide Rod Upper Frame 1

10 Bench Press Base 1

11 Backrest Support Frame 1

12 Bench Press Support 1

13 Leg Developer Holder 1

14 Leg Developer 1

15 Bench Press Frame 2

16 Bench Press Arm 2

17 Bench Press Handle 2

18 Lat Bar 1

19 Guide Rod 2

20 Selector Rod 1

21 Abdominal Strap 1

22 Weight Stack Cover 2

23 Foam Roll Tube 1

24 Angled Double Floating Pulley Bracket 1

25 Single Floating Pulley Bracket 1

26 Backrest Diagonal Support 2

27 Bench Press Axle Ø 5/8” x 9 1/8” 1

28 Foot Plate 2

29 Seat Bracket 1

30 Cable Retainer 3

31 Bracket 1 ¾” x 4 ¾” 1

32 Bracket 2” x 5 ½” 1

33 U-shaped Bracket 3” x 4 ¾” 1

34 Bracket 2 3/8” x 7” 1

35 Backrest Board 1

36 Bench Press Seat Pad 1

Autres manuels pour PM-4510

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Impex Salle de sport à domicile

Impex

Impex Powerhouse Elite PHE 9000 Manuel utilisateur

Impex

Impex NS-1000 Manuel utilisateur

Impex

Impex MARCY MD-9010 Manuel utilisateur

Impex

Impex MARCY DIAMOND ELITE MD-857 Manuel utilisateur

Impex

Impex Iron Grip Sport IGS-05 Manuel utilisateur

Impex

Impex IRON GRIP STRENGTH TSA-41 Manuel utilisateur

Impex

Impex ADBE-10240 Manuel utilisateur

Impex

Impex PowerhouseWM 1400 Manuel d'utilisation et d'entretien

Impex

Impex Marcy Platinum MP-2105 Manuel utilisateur

Impex

Impex GD-810 Manuel utilisateur

Impex

Impex TSA-42 Manuel utilisateur

Impex

Impex MARCY DIAMOND ELITE MD-2080 Manuel utilisateur

Impex

Impex SB 650W Manuel utilisateur

Impex

Impex IGS-8861 Manuel utilisateur

Impex

Impex MARCY MKB-869 Manuel utilisateur

Impex

Impex IRON GRIP STRENGTH TSA-9900 Manuel utilisateur

Impex

Impex MARCY MWB-25980 Manuel utilisateur

Impex

Impex Marcy Diamond Elite MD-PWR-20 Manuel utilisateur

Impex

Impex Marcy MWB-4360 Manuel utilisateur

Impex

Impex Marcy MWM-7119 Manuel utilisateur

Impex

Impex Marcy Diamond MD-859 Manuel utilisateur

Impex

Impex MARCY XJ-6860RW Manuel utilisateur

Impex

Impex WM-1508 Manuel utilisateur

Impex

Impex Powerhouse Club PHC 715 Manuel utilisateur

Manuels Salle de sport à domicile populaires d'autres marques

Horizon Fitness

Horizon Fitness OXFORD 6 Manuel utilisateur

Energetics

Energetics Multi Trainer 5.1 Manuel utilisateur

Matrix

Matrix MG-PL Series Manuel utilisateur

Reebok

Reebok Tbr2i Manuel d'utilisation et d'entretien

Weider

Weider 8300 Hard Drive Manuel utilisateur

Pure Fitness

Pure Fitness 8526HE Manuel utilisateur

Weider

Weider 8700 I Guide de démarrage rapide

Bowflex

Bowflex Sport 001-6961 Manuel utilisateur

NordicTrack

NordicTrack E8200 Competition Bench Guide de démarrage rapide

Weider

Weider WEMC10161 Manuel utilisateur

Body Solid

Body Solid GHYP-345 Manuel utilisateur

Evo

Evo TAHOE 5105 Manuel utilisateur

cardiobull

cardiobull RA17 Manuel utilisateur

ParaBody

ParaBody 40 Manuel utilisateur

JLL

JLL Ventus Pro Air Power Manuel utilisateur

Trojan

Trojan Colorado 370 Manuel utilisateur

Octane Fitness

Octane Fitness xRide xR650 Manuel utilisateur

Precor

Precor Discovery Series Manuel utilisateur