IMOUMLIVE DLJ-6 Manuel utilisateur
6-INCH MINI CHAINSAW
User Manual (Model: DLJ-6)
Read all safety rules and instructions carefully before operating this tool.
Questions or Concerns?
contact IMOUMLIVE via suppo@imoum.com
CATALOG
General PowerTool Safety Warnings 01-03
SafetyWarnings for Charger 04
Specications 05
06-07
Geing to Know Your Chainsaw
Before First Use 08
How to AdjustThe ChainTightness 09
How to ReplaceThe Chain 10-11
HowTo LubricateThe Chain 12
Baery Pack Installation 13
Charge The Baery 14
Troubleshooting 15
Maintenance and Cleaning 16
Environment 16
WarrantyTerms 16
Extend Your Warranty by 1 Year 17
WEEE Recycling Instructions 17-18
General Power Tool Safety Warnings
WARNING!
2.Electrical safety
1. Work area safety
01
Read and understand all instructions. Failure to follow the warnings and
instructions may result in electric shock, re and/or serious injury.
a. Keep work area clean and well lit. Cluered or dark areas
may lead to accidents.
b. Do not operate the chainsaw in explosive atmospheres, such as in the
presence of ammable liquids, gases or dust. Sparks created by the
chainsaw may ignite dust or fumes.
c. Keep children and bystanders away while operating a chainsaw.
Distractions can cause you to lose control.
a. Chainsaw plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with eahed (ground-ed) power tools.
Unmodied plugs and matching outlets will reduce the risk of electric shock.
b. Avoid body contact with eahed or grounded suaces, such as pipes,
radiators,ranges and refrigerators. There is an increased risk of electric
shock if your body is eahed or grounded.
c. Do not expose the chainsaw to rain or wet conditions.Water entering
power tool will increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the chainsaw. Keep the cord away from heat, oil, sharp
edges or moving pas. Damaged or entangled cord increases the risk
of electric shock .
e. If operating the chainsaw in a damp location is unavoidable, please
use a residual current device (RCD) protected supply to reduce the
risk of electric shock.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mainsoperated
(corded) power tool or baery-operated(cordless)power tool.
01
3. Personal safety
4.Chainsaw use and care
Stay ale, watch what you are doing and use common sense when
operating a chainsaw.
Do not
use the chainsaw when you are tired or
under the inuence of drugs, alcohol or medication. A moment of
inaention while operating a chainsaw may result in serious injury.
Use personal protective equipment. Always wear eye protection, protective
equipment such as dust mask, non-skid safety shoes, helmet, or hearing
protection used for appropriate conditions will reduce personal injuries.
Prevent unintentional staing. Ensure the switch is in the o position
before connecting to a power source and/or baery pack, picking up or
carrying the chainsaw.
Remove any adjusting key or wrench before turning the chainsaw on.
A wrench or a key le aached to a rotating pa of the power tool may
result in personal injury.
Do not
overreach while using the chainsaw?
Do not
overreach while using. Keep proper footing and balance at all
times. This enables beer control of the chainsaw in unexpected situations.
Dress properly.
Do not
wear loose clothing or jewelry. Keep your hair,
clothing and gloves away from moving pas. Loose clothes, jewelry or
long hair can be caught in moving pas.
a.
b.
c.
d.
e.
f.
Apply the correct power toolfor your application.The correct power
tool will do the job beer and safer at the rate for which it was designed.
Do not
use the chainsaw if the switch can not be turned on and o,
Any chainsaw that cannot be controlled with the switch is dangerous
and must be repaired.
Disconnect the plugfrom the power source and the baery pack from
the chainsaw before making any adjustments, changing accessories, or
storing a chainsaw. Such preventive safety measures reduce the risk
of unexpected sta.
Store idle chainsaw out of the reach of children.
Do not
allow persons
unfamiliar with the chainsaw or these instructions to operate the
chainsaw. Chainsaws are dangerous in the hands of untrained users.
a.
b.
c.
d.
02
5.Battery tool use and care
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable baeries!
Protect the rechargeable baery from heat, such as
continuous strong sun-light, re, water and moisture.
Maintain chainsaw. Check for misalignment or binding of moving pas,
breakage of pas and any other condition that may aect the chainsaw's
operation. If the chainsaw is damaged, please repair it before the next
use. Many accidents are caused by poorly maintained chainsaws.
Keep cuing tools sharp and clean. Properly maintain cuing tools
with sharp cuing edges are less likely to bind and easier to control.
Use the chainsaw and accessories in accordance with these instructions,
taking into account the working conditions and the work to be peormed.
Use of the chainsaw for operations dierent from the intended use
could result in a hazardous situation.
Children should be supervised to ensure that they do not play.
with the chainsaw.
e.
f.
g.
h.
Recharge only with the charger specied by the manufacturer. A charger
that is suitable for one type of baery pack may create a risk of re
when used with another baery pack.
Do not
open the baery. Prevent the danger of sho-circuiting.
Protect the baery from heat, such as continuous strong sunlight, re,
water and moisture. Prevent the danger of explosion.
Use the chainsaw only with specically designated baery packs. Use
of any other baery packs may create a risk of injury and re.
When the baery pack is not in use, keep it away from other metal
objects, like paper clips, coins, keys, nails, screws or other small metal
objects that can make a connection from one terminal to another.
Shoing the baery terminals together may cause burns or re.
Under abusive conditions, liquid may be ejected from the baery,
please avoid contact. lf contact accidentally occurs, ush with water.
lf liquid contacts eyes, seek medical help immediately. Liquid ejected
from the baery may cause irritation or burns.
a.
b.
c.
d.
e.
f.
03
Safety Warnings for Charger
Do not allow any liquid to come into contact with the charger. Danger
of electric shock may occur.
Do not place tools or chargers near the sink, washbasin, toilet, or any
other places near water.
Do not spill liquid of any kind on the chainsaw or the charger. Doing so
may sho out pas, cause damage to the product, and create the risk
of re or electric shock.
The most suitable temperature to charge the baery packs is between
68F°-77F°. During charging, baeries must be placed in a well-ventilated area.
The chainsaw is not to be used by persons (including children)with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge unless they have been given supervision instructions.
Children must be supervised not to play with the appliance.
Donot recharge non-rechargeable baeries!
04
Specifications
Battery Specification
Product Specification
Model Name
Brand
Max Cuing Diameter
Power Source
Horsepower
ProductWeight
DLJ-6
IMOUMLIVE
6 Inch
Baery Powered
600 Was
2.2 Lbs
Baery Type
Voltage
Baery Capacity
ChargingTime
Working Time
Li-ion Baery
21V
2.0 Ah 37Wh
2 Hours
60 Min
05
Getting to Know Your Chainsaw
To reduce the risk of serious personal injury, turn the unit o and
remove the baery pack before making any adjustments or
removing/installing aachments or accessories. An accidental
sta-up can cause injury.
2.0Ah Baery Pack
Anti-slip handle Oil Pump Chain tensioning roller
6”saw chain
Bar locking knob
Sprocket cover
Sta switch
Hand guard
6”guide bar
Bae
Brushless Motor
Safety Lock
Oil reservoir
OilTube
NOTE
06
Cover xing column Ⅱ
Cover xing column Ⅲ
Adjustment column
Cover xing hole
Cover xing column Ⅰ
07
Before First Use
If you feel that the baery is inseed tightly, please quickly
unplug it 3-5 times to get a suitable tightness.
NOTE
1. Check if the received accessories are complete.
2. Full charge the baery.
3. Check whether the chain is tight or not. If the chain becomes loose,
follow the instructions on Page 9 and tighten the chain.
4. Tighten the locking knob rmly to prevent the chain and cover from
loosening during cuing.
5. Fill the oil reservoir with lubricating oil.
6. Inse a fully charged baery pack.
7. Press the oil pump to lubricate the chain and sta the equipment to use.
08
Table des matières
Autres manuels IMOUMLIVE Tronçonneuse
