Immergas 3.027290 Manuel utilisateur
IE
Cod. 1.042129 - Rev. ST.003678/001
Fig. 1
BRACKET KIT FORWALL MOUNTING
INERTIAL STORAGE TANK 75 LITRES
CODE 3.027290
GENERAL WARNINGS.
All products are protected with suitable transport packaging. The material must be stored in dry environments and protected against
weathering.
This instruction manual provides technical information for installing the kit. As for the other issues related to kit installation (e.g. safety in
the work site, environment protection, injury prevention), it is necessary to comply with the provisions specified in the regulations in
force and principles of good practice.
Improper installation or assembly of the appliance and/or compo-nents, accessories, kit and devices can cause unexpected problems to
people, animals and objects. Read the instructions provided with the product carefully to ensure a proper installation. Installation and
maintenance must be performed in compliance with the regulations in force, according to the manufacturer's instructions and byauthorised
professionally qualified staff, intending staff with specific technical skills in the plant sector, as envisioned by the Law.
WARNINGS:
Before making the holes to mount the bracket to the wall with the dowels supplied, we recommend referring to the main boiler
dimensions (Fig. 1) and to the related fixing seats of the frame.
MAIN DIMENSIONS
INSTALLATION (FIG. 2 - 3 - 4): To install proceed as follows:
- Fasten the mount (3) at the height desired on the wall inserting the screws in the specific holes prepared for the screws (2) and the
dowels (1) inside the kit (Fig. 2).
- Fasten the lower support (6) in the position shown in the dra-wing (Fig. 3). Insert the screws (2) and the dowels (1), present inside
the kit, into the specific holes. Insert the 2 screws (5) present inside the kit on the lower support.
- Fasten the frame (4) on the prepared seat on the boiler using the screws (5) inside the kit (Fig. 2).
- Hang the boiler to the bracket on the wall.
- Make sure that the boiler pedestal comes into contact with the lower support as shown in the drawing (Fig. 4).
KIT COMPOSITION.
Ref. Description Qty
1 Nylon dowel 12x60 7
2 Screw 8x80 for dowel 7
3 Wall-mounted boiler support 1
4
Frame for wall mounting boiler
1
5 Screws M6x15 6
6 Lower wall-mounted boiler support 1
Fig. 2
9
2
1
5
6
1
2
3
4
5
a
7
8
ASSEMBLY
Fig. 3
Fig. 4
FASTENING THE LOWER SUPPORT
LOWER SUPPORT POSITION ON PEDESTAL
Storage Tank 75 Litres
Reference Axis
Table des matières
Autres manuels Immergas Stockage
Immergas
Immergas UB INOX 80 ErP Manuel utilisateur
Immergas
Immergas BASIC MAGIS PRO Manuel du produit
Immergas
Immergas Hercules Condensing 26 2 E Manuel utilisateur
Immergas
Immergas INOXSTOR 200 V2 Mode d'emploi
Immergas
Immergas 3.022167 Manuel du produit
Immergas
Immergas COD. 3.030394 Manuel du produit
Immergas
Immergas UB 1000 V2 Mode d'emploi
Manuels Stockage populaires d'autres marques
Spectra Logic
Spectra Logic T-Series Spectra T50e Manuel utilisateur
Panasonic
Panasonic LKM-F931-1 Manuel utilisateur
Tabernus
Tabernus Enterprise Erase E2400 Manuel utilisateur
Rocstor
Rocstor COMMANDER 3F series Manuel utilisateur
HP
HP P9000 Manuel utilisateur
Western Digital
Western Digital Ultrastar Data60 Manuel utilisateur