IKEA BEMOTA Manuel utilisateur

BEMOTA

ENGLISH 4

ENGLISH

Safety information

For your own safety and correct operation of the appliance,

please read this manual carefully before installation and op-

eration. Always keep these instructions together with the

appliance, even if it is sold or transferred to third parties. It is

important that users are familiar with all the appliance's op-

erating and safety characteristics.

Connection of the wiring must be performed by a specialist

technician.

• The manufacturer cannot be held responsible for any damage

resulting from incorrect or inadequate installation.

• The minimum safety distance between the cooker hob and the

extractor hood is: for electrical hob 500mm and for gas hob

500mm.

• If the gas hob installation instructions specify a distance

greater than that indicated above, this must be taken into ac-

count.

• Check that the mains voltage corresponds to that indicated on

the rating plate fixed to the inside of the hood.

• The cut-out devices must be installed in the fixed system ac-

Contents

Safety information 4

General information 8

Product description 10

Control panel 10

General tips 11

Cleaning and maintenance 11

What to do if... 12

Technical data 13

Environmental aspects 14

IKEA guarantee 14

cording to the wiring system regulations.

• For Class I appliances, check that the domestic power supply

has a suitable earthing connection.

• Connect the hood to the flue with a pipe with a minimum dia-

meter of 120 mm. The fume path must be as short as possible.

• All the regulations regarding air discharge must be complied

with.

• Do not connect the extractor hood to exhaust ducts carrying

combustion fumes (boilers, fireplaces, etc.).

• If the extractor is used in conjunction with non-electrical appli-

ances (e.g. gas burning appliances), a sufficient degree of

ventilation must be guaranteed in the room in order to pre-

vent the backflow of exhaust gas. When the cooker hood is

used in conjunction with appliances supplied with energy

other than electricity, the negative pressure in the room must

not exceed 4 Pa mbar to prevent fumes being drawn back into

the room by the cooker hood.

• The air must not be discharged into a flue that is used for ex-

hausting fumes from appliances burning gas or other fuels.

• The power cord, if damaged, must be replaced by the manu-

facturer or by a service technician.

• Connect the plug to a socket complying with current regula-

tions, located in an accessible place.

• Regarding the technical and safety measures to be adopted

for fume discharging it is important to strictly follow the regu-

lations provided by the local authorities.

WARNING: Before installing the hood, remove the protective

films.

• Use only screws and small parts of a type suitable for the hood.

ENGLISH 5

WARNING: failure to install the screws or fixing devices in ac-

cordance with these instructions may result in electrical haz-

ards.

• Connect the hood to the power supply by means of a bipolar

switch with a distance between the contacts of at least 3 mm.

• Do not look directly at the light through optical devices (bin-

oculars, magnifying glasses…).

• Do not flambé under the hood; risk of fire.

• This appliance can be used by children aged from 8 years and

above and by persons with reduced physical, sensory or men-

tal capabilities or lacking in experience and knowledge if they

have been given supervision or instruction concerning use of

the appliance in a safe way and if they understand the hazards

involved. Children must not play with the appliance. Cleaning

and maintenance by the user must not be performed by chil-

dren, unless they are supervised.

• Children should be supervised to ensure that they do not play

with the appliance.

• The appliance is not to be used by persons (including children)

with reduced physical, sensory or mental capabilities, or lack-

ing in experience and knowledge, unless they have been given

supervision or instruction.

The accessible parts may become hot when used with cook-

ing appliances.

• Clean and/or replace the filters after the time specified (fire

hazard).

• There must be adequate ventilation of the room when the

hood is used at the same time as appliances burning gas or

other fuels (not applicable to appliances that only discharge

the air back into the room).

• Kitchen hoods and other cooking fume extractors can affect

ENGLISH 6

the safe operation of appliances which burn gas or other fuels

(including those in other rooms) due to the backflow of com-

bustion gases. These gases can cause carbon monoxide pois-

oning. After installing a kitchen extractor hood or any other

cooking fume extractor, make sure that the gas appliances are

tested by a certified technician to guarantee that there is no

backflow of combustion gases.

ENGLISH 7

General information

Use

• Switch off or unplug the appliance from the

mains supply before carrying out any main-

tenance work.

• The top of the hood must not to be used as

a shelf.

• The extractor hood has been designed ex-

clusively to eliminate cooking smells in do-

mestic use.

• Never use the extractor hood for purposes

other than those for which it was designed.

• Never leave high flames under the ex-

tractor hood when it is on.

• Adjust the flame intensity to direct it onto

the bottom of the pan only, making sure

that it does not engulf the sides.

• Deep fat fryers must be continuously mon-

itored during use: overheated oil can burst

into flames.

Installation method

The hood has been designed for installation

and use in the "suction version" or in the "air

recirculation version".

Extraction version (see symbol in the

installation instructions)

Cooking steam is suctioned and channelled

outside the house through a discharge duct

(not supplied), fitted to the hood steam

outlet. Make sure that the outlet duct is

properly installed at the air outlet, using a

suitable connection system.

Air recirculation version (see symbol in

the installation instructions)

The air is filtered through one or more

carbon filters, and then resent into the room.

Important: Ensure appropriate air circulation

around the hood.

Important: If the hood is supplied without

carbon filters and installed on recirculation

mode, these must be fitted before the hood

can be used. The filters are commercially

available.

The hood should be installed away from

particularly dirty areas, windows, doors and

heat sources. Wall mounting accessories are

not included as they vary depending on the

wall material. Use fixing systems suitable for

the walls of your home and for the weight of

the appliance. For further details, contact a

specialist dealer. Keep this booklet for future

consultation.

ENGLISH 8

Filters alarm

When the filter alarm is activated, the

following messages will appear over time:

Grease filter must be cleaned:

“A” key flashes once per second. For

maintenance see paragraph Care and

cleaning.

Anti-odour filter must be cleaned:

“A” key flashes twice per second. For

maintenance see paragraph Care and

cleaning.

Once the filters have been regenerated reset

the alarm signal (see paragraph Control

Panel).

ENGLISH 9

Product description

1Upper chimney

2Lower chimney

3Hood body

4LED Lighting

5Grease filter

6Control panel

Control panel

BUTTON FUNCTION

Speed

Turns the motor on/off at speed one.

Attention: the product is with the filter alarm disabled.

Press and hold the button for approximately 2 seconds, with all the loads turned off (Motor+Lights), to turn the

grease filter alarm on. LED (B) flashes twice to confirm.

To turn the alarm off, press the button again and hold for at least 2 seconds. The relevant LED (B) flashes once.

Speed

Turns the motor on at speed two / Activate charcoal filter alarm.

Attention: the product is with the filter alarm disabled.

Press and hold the button for approximately 2 seconds, with all the loads turned off (Motor+Lights), to turn the

Activated Charcoal Filter alarm on. LED (A) flashes twice to confirm.

To turn the alarm off, press the button again and hold for at least 2 seconds.The relevant LED flashes once (A).

Only for recirculation mode.

Speed

Turns the Motor on at speed three / Reset alarm grease filter saturation.

Press and hold the button for approximately 2 seconds, with all the loads turned off (Motor+Lights), to reset the

grease filter saturation alarm or charcoal filter alarm. LED (A) flashes three times.

Speed

Turns the motor on at Booster speed.

This speed is timed to run for 6 minutes. At the end of this time, the system returns automatically to the speed

that was set before. If it is activated with the motor turned off, it will switch to OFF at the end of the time. To de-

activate it, press button D or press button A.

Light

Press briefly: Turns the lighting system on and off at maximum intensity.

Press and hold to change the lighting intensity up or down.

ENGLISH 10

Autres manuels pour BEMOTA

Table des matières

Autres manuels IKEA hotte de ventilation

IKEA

IKEA FINSMAKARE Manuel utilisateur

IKEA

IKEA IHW6530BS0 Manuel utilisateur

IKEA

IKEA W10258591A Fiche d'information produit

IKEA

IKEA LUFTIG BF325 Manuel utilisateur

IKEA

IKEA RYTMISK 703.893.42 Manuel utilisateur

IKEA

IKEA VINSTGIVANDE Manuel utilisateur

IKEA

IKEA IH8432WS0 Fiche d'information produit

IKEA

IKEA FOLJANDE Manuel utilisateur

IKEA

IKEA IHW6302YB0 Fiche d'information produit

IKEA

IKEA BALANSERAD Manuel utilisateur

IKEA

IKEA IHI75UC6FS0 Fiche d'information produit

IKEA

IKEA FOLJANDE Manuel utilisateur

IKEA

IKEA NUTID HF560 Manuel utilisateur

IKEA

IKEA UDDEN Manuel utilisateur

IKEA

IKEA FULLSTANDIG Manuel utilisateur

IKEA

IKEA W10177447B Fiche d'information produit

IKEA

IKEA LUFTIG Manuel utilisateur

IKEA

IKEA POTENTIELL Manuel utilisateur

IKEA

IKEA LUFTIG Fiche d'information produit

IKEA

IKEA LACKERBIT Manuel utilisateur

IKEA

IKEA LUFTIG Manuel utilisateur

IKEA

IKEA BF570 Mode d’emploi

IKEA

IKEA BEMOTA Manuel utilisateur

IKEA

IKEA FINSMAKARE Manuel utilisateur

Manuels hotte de ventilation populaires d'autres marques

emmeti

emmeti RECUPA MED A-140 Mode d’emploi

Nibe

Nibe F135 Manuel utilisateur

Kuppersberg

Kuppersberg INTRO 60 Instructions d'installation et d'entretien

Zephyr

Zephyr Spruce AK9834BS Guide d'installation

Hisense

Hisense MH6INBG Manuel utilisateur

Miele

Miele DA 1255 Manuel utilisateur

Broan

Broan 46000 Manuel utilisateur

GE Profile PV977 Instructions originales

FALMEC

FALMEC FFRIA24W5FS Manuel utilisateur

Whirlpool

Whirlpool RH2600XL-1 SERIES Manuel utilisateur

Küppersbusch

Küppersbusch DX ISLA Manuel utilisateur

ETNA

ETNA AV360RVS Manuel utilisateur

JUNO

JUNO JDF603E6 Manuel utilisateur

Miele

Miele DA 6708 D Manuel utilisateur

Tricity Bendix

Tricity Bendix LE 150 Manuel

AEG

AEG X68163BV1 Manuel utilisateur

AEG

AEG 125 D Manuel utilisateur

Smeg

Smeg KSEV97X Manuel utilisateur