IKE 304 Manuel utilisateur

WELCOME TO YOUR ike

• Seamless GIS integration

• Easy to use

• Rugged and reliable

ABOUT THE ike

MAIN INTERFACE CABLE PORT: The main interface connector

cable connects to this port providing multi function capability. A USB

connection supports transferring data to and from a personal computer

using Microsoft® ActiveSync™ . The power connector connects with

ike compliant in-vehicle chargers, portable power pack and standard AC

adaptor. The RS232 connector provides a serial port to connect external

equipment, e.g. RTCM devices.

INCLINOMETER: Measures the pitch and roll. This means that ike can be

reliably used as a hand-held device, and does not need a tripod.

GPS ANTENNA CONNECTOR: For use with optional external GPS antenna.

WINDOWS MOBILE 5 COMPUTER: Forms can be tailor made using

ESRI® ArcPad Application Builder™. A Software Development Kit is

available, which allows further development in Microsoft® embedded

Visual Basic™ or embedded Visual C++™.

DIGITAL CAMERA:

A picture tells more than a thousand words.

Crosshairs show where the Laser Distance Meter is aiming, and

ensures the correct target is captured. The photo is locked together

with the target’s position and a timestamp in a GIS database.

LASER DISTANCE METER: Measures the distance to the target.

COMPASS: Measures the bearing to the target. Useful for storing the

directions from which photos are captured.

SEALED COVER: For access to removable memory card.

GPS: Captures the GPS position. When gathering data, ike’s position, or

the target position, can be used.

POWER:

Internal battery power for full day use.

Rechargeable with mains

adapter or vehicle charger.

Email: [email protected]

Web: www.survey-lab.com

HELPFUL HINTS

When capturing data, ensure you are standing in a location

with the clearest view of sky. This will allow a good GPS ﬁx.

Always keep ike on charge when not in use. Recharge your

ike in the car using the car charger provided.

Make sure you are happy with your data before saving.

To ensure crosshairs are saved with the photo, go to

DCA initial screen > Settings > Image > ensure Save

image with crosshair box is checked.

To remove data off ike permanently, check the option

Remove source ﬁles from ike after copy in ikesync

settings on your PC.

If ike doesn’t respond after

30 seconds, perform a soft

reset by inserting the stylus tip

into the hole above the External

GPS Antenna Connector, this

will reboot ike.

MAIN INTERFACE CABLE & CONNECTOR

To insert or remove the interface cable,

take hold of the grooved connector

sleeve, do not hold or twist the cable.

To insert connector, hold with the red dot at the top and insert,

push to lock.

To remove, ﬁrst pull the locking sleeve back, then pull out

connector to remove.

TO INSTALL THE SURVEYLAB SOFTWARE

ON YOUR PC

Insert the Surveylab software CD into your PC.

Run setup.exe.

Follow the on-screen instructions.

TRANSFERRING DATA TO AND FROM ike

USING YOUR PC

Important, please make sure both ArcPad and the DCA on

ike are fully closed before starting the download process.

(To close ArcPad tap ).

To transfer data between ike and your PC, you will need

to connect ike to your PC using the USB cable provided.

See the next page for cable connecting instructions.

Activesync will start automatically and ask if you want to set

up a partnership. Select Guest Partnership, click Next.

Start ikesync on the PC, Start > All Programs > Surveylab >

ikesync.

Within the ikesync menu click Tools > Settings to

select the directory where you want the data stored,

e.g. c:\ike\051231_exampledata.

Click the button ike Transfer to

Computer to start the download.

NOTE:

Users will need to have a licensed copy of ArcPad

installed on their desktop.

ACTIVATING DATA AND PHOTO CAPTURE

Push to activate the data capture initial screen:

You can now select the Shape File from the Data Type pull

down menu that you wish to use.

First time users select the Generic Shape File.

Once you have chosen the form, tap Capture Data.

NOTE:

The correct magnetic declination for your area

will need to be entered into ike. Use settings in the

DCA > Settings > General to enter a new value.

TURNING THE GPS ON

Before ike can capture an image, the GPS must be activated.

Tap icon to show GPS satellites.

Tap

Yes

to turn GPS on.

You will know you are getting a positive GPS

location when your GPS cursor looks like this:

GPS ﬁx status appears directly

below the image.

Sometimes you have to wait for the GPS to get a reading.

Initially, red text will appear: GPS: Fix not available

Once a ﬁx is available, green text will appear: GPS: PDOP: 2.1

(PDOP indicates the quality of a GPS ﬁx, the lower the number

the more accurate the position, i.e. aim for 5.0 or below).

USING THE GPS IN THE DATA CAPTURE

APPLICATION (DCA)

The bar graph in the capture

screen gives a visual indication of

the current distance to the target.

The camera and laser are calibrated to meet at the point

shown in the preview screen which is ringed by the

Move the on and off the target and you will see the

range as shown in the bar graph change as the laser paints

the target. This change in distance will help you assess

when you are on target.

USING THE LASER DISTANCE METER

IN THE DCA

BEFORE YOU GET STARTED

Ensure you have received everything on the supplied

checklist. If not, contact support@survey-lab.com.

Put your ike on charge for at least 4 hours prior to use to

ensure that ike is fully charged.

STARTING UP AND USING YOUR ike

To turn on ike push the power button

The Surveylab screen

will appear:

To start ArcPad, push

If a message appears saying Arcpad.apm not found, tap Yes to

restore default ﬁle.

If you have not registered ArcPad, the registration screen will

appear. If you have the registration key, please enter it.

NOTE: You can either register or skip to activate ArcPad for

20 minutes.

When you are happy with the

GPS PDOP value and you are on

target, tap Capture. (Make sure

you keep ike steady when

capturing the point).

A window will appear that will

allow you to review information

recorded at the time of capture.

Check to see if you are satisﬁed

with the PDOP value, image

quality and distance to target.

If no, tap Retry to start again.

If yes, tap Finish to move on.

Enter image label and comments

in the display ﬁelds:

Tap OK to save the data.

ike will return to the ArcPad

screen where you simply push

to start to capture another point.

Further information is available in the ike user manual.

CAPTURING DATA AND PHOTOS

ArcPad ICONS

GPS active

GPS position window

Add layer

View layers

Select feature

Exit ArcPad

Zoom in

Zoom out

Zoom to full extent

Hyperlink

Identify feature

Launch DCA

Pan

Delete selected feature

Edit selected feature

the Surveylab satellite logo and Surveylab are trademarks of Surveylab Ltd.

ArcPad is the registered trademarks of Environmental Systems Research

Institute, Inc. Trademarks are the property of their respective owners.

New Zealand and International Patents Pending. SL00029 v0.9

ACTIVATING DATA AND PHOTO CAPTURE

Push to activate the data capture initial screen:

You can now select the Shape File from the Data Type pull

down menu that you wish to use.

First time users select the Generic Shape File.

Once you have chosen the form, tap Capture Data.

NOTE:

The correct magnetic declination for your area

will need to be entered into ike. Use settings in the

DCA > Settings > General to enter a new value.

TURNING THE GPS ON

Before ike can capture an image, the GPS must be activated.

Tap icon to show GPS satellites.

Tap

Yes

to turn GPS on.

You will know you are getting a positive GPS

location when your GPS cursor looks like this:

GPS ﬁx status appears directly

below the image.

Sometimes you have to wait for the GPS to get a reading.

Initially, red text will appear: GPS: Fix not available

Once a ﬁx is available, green text will appear: GPS: PDOP: 2.1

(PDOP indicates the quality of a GPS ﬁx, the lower the number

the more accurate the position, i.e. aim for 5.0 or below).

USING THE GPS IN THE DATA CAPTURE

APPLICATION (DCA)

The bar graph in the capture

screen gives a visual indication of

the current distance to the target.

The camera and laser are calibrated to meet at the point

shown in the preview screen which is ringed by the

Move the on and off the target and you will see the

range as shown in the bar graph change as the laser paints

the target. This change in distance will help you assess

when you are on target.

USING THE LASER DISTANCE METER

IN THE DCA

BEFORE YOU GET STARTED

Ensure you have received everything on the supplied

checklist. If not, contact support@survey-lab.com.

Put your ike on charge for at least 4 hours prior to use to

ensure that ike is fully charged.

STARTING UP AND USING YOUR ike

To turn on ike push the power button

The Surveylab screen

will appear:

To start ArcPad, push

If a message appears saying Arcpad.apm not found, tap Yes to

restore default ﬁle.

If you have not registered ArcPad, the registration screen will

appear. If you have the registration key, please enter it.

NOTE: You can either register or skip to activate ArcPad for

20 minutes.

When you are happy with the

GPS PDOP value and you are on

target, tap Capture. (Make sure

you keep ike steady when

capturing the point).

A window will appear that will

allow you to review information

recorded at the time of capture.

Check to see if you are satisﬁed

with the PDOP value, image

quality and distance to target.

If no, tap Retry to start again.

If yes, tap Finish to move on.

Enter image label and comments

in the display ﬁelds:

Tap OK to save the data.

ike will return to the ArcPad

screen where you simply push

to start to capture another point.

Further information is available in the ike user manual.

CAPTURING DATA AND PHOTOS

ArcPad ICONS

GPS active

GPS position window

Add layer

View layers

Select feature

Exit ArcPad

Zoom in

Zoom out

Zoom to full extent

Hyperlink

Identify feature

Launch DCA

Pan

Delete selected feature

Edit selected feature

the Surveylab satellite logo and Surveylab are trademarks of Surveylab Ltd.

ArcPad is the registered trademarks of Environmental Systems Research

Institute, Inc. Trademarks are the property of their respective owners.

New Zealand and International Patents Pending. SL00029 v0.9

ACTIVATING DATA AND PHOTO CAPTURE

Push to activate the data capture initial screen:

You can now select the Shape File from the Data Type pull

down menu that you wish to use.

First time users select the Generic Shape File.

Once you have chosen the form, tap Capture Data.

NOTE:

The correct magnetic declination for your area

will need to be entered into ike. Use settings in the

DCA > Settings > General to enter a new value.

TURNING THE GPS ON

Before ike can capture an image, the GPS must be activated.

Tap icon to show GPS satellites.

Tap

Yes

to turn GPS on.

You will know you are getting a positive GPS

location when your GPS cursor looks like this:

GPS ﬁx status appears directly

below the image.

Sometimes you have to wait for the GPS to get a reading.

Initially, red text will appear: GPS: Fix not available

Once a ﬁx is available, green text will appear: GPS: PDOP: 2.1

(PDOP indicates the quality of a GPS ﬁx, the lower the number

the more accurate the position, i.e. aim for 5.0 or below).

USING THE GPS IN THE DATA CAPTURE

APPLICATION (DCA)

The bar graph in the capture

screen gives a visual indication of

the current distance to the target.

The camera and laser are calibrated to meet at the point

shown in the preview screen which is ringed by the

Move the on and off the target and you will see the

range as shown in the bar graph change as the laser paints

the target. This change in distance will help you assess

when you are on target.

USING THE LASER DISTANCE METER

IN THE DCA

BEFORE YOU GET STARTED

Ensure you have received everything on the supplied

checklist. If not, contact support@survey-lab.com.

Put your ike on charge for at least 4 hours prior to use to

ensure that ike is fully charged.

STARTING UP AND USING YOUR ike

To turn on ike push the power button

The Surveylab screen

will appear:

To start ArcPad, push

If a message appears saying Arcpad.apm not found, tap Yes to

restore default ﬁle.

If you have not registered ArcPad, the registration screen will

appear. If you have the registration key, please enter it.

NOTE: You can either register or skip to activate ArcPad for

20 minutes.

When you are happy with the

GPS PDOP value and you are on

target, tap Capture. (Make sure

you keep ike steady when

capturing the point).

A window will appear that will

allow you to review information

recorded at the time of capture.

Check to see if you are satisﬁed

with the PDOP value, image

quality and distance to target.

If no, tap Retry to start again.

If yes, tap Finish to move on.

Enter image label and comments

in the display ﬁelds:

Tap OK to save the data.

ike will return to the ArcPad

screen where you simply push

to start to capture another point.

Further information is available in the ike user manual.

CAPTURING DATA AND PHOTOS

ArcPad ICONS

GPS active

GPS position window

Add layer

View layers

Select feature

Exit ArcPad

Zoom in

Zoom out

Zoom to full extent

Hyperlink

Identify feature

Launch DCA

Pan

Delete selected feature

Edit selected feature

the Surveylab satellite logo and Surveylab are trademarks of Surveylab Ltd.

ArcPad is the registered trademarks of Environmental Systems Research

Institute, Inc. Trademarks are the property of their respective owners.

New Zealand and International Patents Pending. SL00029 v0.9

ACTIVATING DATA AND PHOTO CAPTURE

Push to activate the data capture initial screen:

You can now select the Shape File from the Data Type pull

down menu that you wish to use.

First time users select the Generic Shape File.

Once you have chosen the form, tap Capture Data.

NOTE:

The correct magnetic declination for your area

will need to be entered into ike. Use settings in the

DCA > Settings > General to enter a new value.

TURNING THE GPS ON

Before ike can capture an image, the GPS must be activated.

Tap icon to show GPS satellites.

Tap

Yes

to turn GPS on.

You will know you are getting a positive GPS

location when your GPS cursor looks like this:

GPS ﬁx status appears directly

below the image.

Sometimes you have to wait for the GPS to get a reading.

Initially, red text will appear: GPS: Fix not available

Once a ﬁx is available, green text will appear: GPS: PDOP: 2.1

(PDOP indicates the quality of a GPS ﬁx, the lower the number

the more accurate the position, i.e. aim for 5.0 or below).

USING THE GPS IN THE DATA CAPTURE

APPLICATION (DCA)

The bar graph in the capture

screen gives a visual indication of

the current distance to the target.

The camera and laser are calibrated to meet at the point

shown in the preview screen which is ringed by the

Move the on and off the target and you will see the

range as shown in the bar graph change as the laser paints

the target. This change in distance will help you assess

when you are on target.

USING THE LASER DISTANCE METER

IN THE DCA

BEFORE YOU GET STARTED

Ensure you have received everything on the supplied

checklist. If not, contact support@survey-lab.com.

Put your ike on charge for at least 4 hours prior to use to

ensure that ike is fully charged.

STARTING UP AND USING YOUR ike

To turn on ike push the power button

The Surveylab screen

will appear:

To start ArcPad, push

If a message appears saying Arcpad.apm not found, tap Yes to

restore default ﬁle.

If you have not registered ArcPad, the registration screen will

appear. If you have the registration key, please enter it.

NOTE: You can either register or skip to activate ArcPad for

20 minutes.

When you are happy with the

GPS PDOP value and you are on

target, tap Capture. (Make sure

you keep ike steady when

capturing the point).

A window will appear that will

allow you to review information

recorded at the time of capture.

Check to see if you are satisﬁed

with the PDOP value, image

quality and distance to target.

If no, tap Retry to start again.

If yes, tap Finish to move on.

Enter image label and comments

in the display ﬁelds:

Tap OK to save the data.

ike will return to the ArcPad

screen where you simply push

to start to capture another point.

Further information is available in the ike user manual.

CAPTURING DATA AND PHOTOS

ArcPad ICONS

GPS active

GPS position window

Add layer

View layers

Select feature

Exit ArcPad

Zoom in

Zoom out

Zoom to full extent

Hyperlink

Identify feature

Launch DCA

Pan

Delete selected feature

Edit selected feature

the Surveylab satellite logo and Surveylab are trademarks of Surveylab Ltd.

ArcPad is the registered trademarks of Environmental Systems Research

Institute, Inc. Trademarks are the property of their respective owners.

New Zealand and International Patents Pending. SL00029 v0.9

ACTIVATING DATA AND PHOTO CAPTURE

Push to activate the data capture initial screen:

You can now select the Shape File from the Data Type pull

down menu that you wish to use.

First time users select the Generic Shape File.

Once you have chosen the form, tap Capture Data.

NOTE:

The correct magnetic declination for your area

will need to be entered into ike. Use settings in the

DCA > Settings > General to enter a new value.

TURNING THE GPS ON

Before ike can capture an image, the GPS must be activated.

Tap icon to show GPS satellites.

Tap

Yes

to turn GPS on.

You will know you are getting a positive GPS

location when your GPS cursor looks like this:

GPS ﬁx status appears directly

below the image.

Sometimes you have to wait for the GPS to get a reading.

Initially, red text will appear: GPS: Fix not available

Once a ﬁx is available, green text will appear: GPS: PDOP: 2.1

(PDOP indicates the quality of a GPS ﬁx, the lower the number

the more accurate the position, i.e. aim for 5.0 or below).

USING THE GPS IN THE DATA CAPTURE

APPLICATION (DCA)

The bar graph in the capture

screen gives a visual indication of

the current distance to the target.

The camera and laser are calibrated to meet at the point

shown in the preview screen which is ringed by the

Move the on and off the target and you will see the

range as shown in the bar graph change as the laser paints

the target. This change in distance will help you assess

when you are on target.

USING THE LASER DISTANCE METER

IN THE DCA

BEFORE YOU GET STARTED

Ensure you have received everything on the supplied

checklist. If not, contact support@survey-lab.com.

Put your ike on charge for at least 4 hours prior to use to

ensure that ike is fully charged.

STARTING UP AND USING YOUR ike

To turn on ike push the power button

The Surveylab screen

will appear:

To start ArcPad, push

If a message appears saying Arcpad.apm not found, tap Yes to

restore default ﬁle.

If you have not registered ArcPad, the registration screen will

appear. If you have the registration key, please enter it.

NOTE: You can either register or skip to activate ArcPad for

20 minutes.

When you are happy with the

GPS PDOP value and you are on

target, tap Capture. (Make sure

you keep ike steady when

capturing the point).

A window will appear that will

allow you to review information

recorded at the time of capture.

Check to see if you are satisﬁed

with the PDOP value, image

quality and distance to target.

If no, tap Retry to start again.

If yes, tap Finish to move on.

Enter image label and comments

in the display ﬁelds:

Tap OK to save the data.

ike will return to the ArcPad

screen where you simply push

to start to capture another point.

Further information is available in the ike user manual.

CAPTURING DATA AND PHOTOS

ArcPad ICONS

GPS active

GPS position window

Add layer

View layers

Select feature

Exit ArcPad

Zoom in

Zoom out

Zoom to full extent

Hyperlink

Identify feature

Launch DCA

Pan

Delete selected feature

Edit selected feature

the Surveylab satellite logo and Surveylab are trademarks of Surveylab Ltd.

ArcPad is the registered trademarks of Environmental Systems Research

Institute, Inc. Trademarks are the property of their respective owners.

New Zealand and International Patents Pending. SL00029 v0.9

WELCOME TO YOUR ike

• Seamless GIS integration

• Easy to use

• Rugged and reliable

ABOUT THE ike

MAIN INTERFACE CABLE PORT: The main interface connector

cable connects to this port providing multi function capability. A USB

connection supports transferring data to and from a personal computer

using Microsoft® ActiveSync™ . The power connector connects with

ike compliant in-vehicle chargers, portable power pack and standard AC

adaptor. The RS232 connector provides a serial port to connect external

equipment, e.g. RTCM devices.

INCLINOMETER: Measures the pitch and roll. This means that ike can be

reliably used as a hand-held device, and does not need a tripod.

GPS ANTENNA CONNECTOR: For use with optional external GPS antenna.

WINDOWS MOBILE 5 COMPUTER: Forms can be tailor made using

ESRI® ArcPad Application Builder™. A Software Development Kit is

available, which allows further development in Microsoft® embedded

Visual Basic™ or embedded Visual C++™.

DIGITAL CAMERA:

A picture tells more than a thousand words.

Crosshairs show where the Laser Distance Meter is aiming, and

ensures the correct target is captured. The photo is locked together

with the target’s position and a timestamp in a GIS database.

LASER DISTANCE METER: Measures the distance to the target.

COMPASS: Measures the bearing to the target. Useful for storing the

directions from which photos are captured.

SEALED COVER: For access to removable memory card.

GPS: Captures the GPS position. When gathering data, ike’s position, or

the target position, can be used.

POWER:

Internal battery power for full day use.

Rechargeable with mains

adapter or vehicle charger.

Email: [email protected]

Web: www.survey-lab.com

HELPFUL HINTS

When capturing data, ensure you are standing in a location

with the clearest view of sky. This will allow a good GPS ﬁx.

Always keep ike on charge when not in use. Recharge your

ike in the car using the car charger provided.

Make sure you are happy with your data before saving.

To ensure crosshairs are saved with the photo, go to

DCA initial screen > Settings > Image > ensure Save

image with crosshair box is checked.

To remove data off ike permanently, check the option

Remove source ﬁles from ike after copy in ikesync

settings on your PC.

If ike doesn’t respond after

30 seconds, perform a soft

reset by inserting the stylus tip

into the hole above the External

GPS Antenna Connector, this

will reboot ike.

MAIN INTERFACE CABLE & CONNECTOR

To insert or remove the interface cable,

take hold of the grooved connector

sleeve, do not hold or twist the cable.

To insert connector, hold with the red dot at the top and insert,

push to lock.

To remove, ﬁrst pull the locking sleeve back, then pull out

connector to remove.

TO INSTALL THE SURVEYLAB SOFTWARE

ON YOUR PC

Insert the Surveylab software CD into your PC.

Run setup.exe.

Follow the on-screen instructions.

TRANSFERRING DATA TO AND FROM ike

USING YOUR PC

Important, please make sure both ArcPad and the DCA on

ike are fully closed before starting the download process.

(To close ArcPad tap ).

To transfer data between ike and your PC, you will need

to connect ike to your PC using the USB cable provided.

See the next page for cable connecting instructions.

Activesync will start automatically and ask if you want to set

up a partnership. Select Guest Partnership, click Next.

Start ikesync on the PC, Start > All Programs > Surveylab >

ikesync.

Within the ikesync menu click Tools > Settings to

select the directory where you want the data stored,

e.g. c:\ike\051231_exampledata.

Click the button ike Transfer to

Computer to start the download.

NOTE:

Users will need to have a licensed copy of ArcPad

installed on their desktop.

WELCOME TO YOUR ike

• Seamless GIS integration

• Easy to use

• Rugged and reliable

ABOUT THE ike

MAIN INTERFACE CABLE PORT: The main interface connector

cable connects to this port providing multi function capability. A USB

connection supports transferring data to and from a personal computer

using Microsoft® ActiveSync™ . The power connector connects with

ike compliant in-vehicle chargers, portable power pack and standard AC

adaptor. The RS232 connector provides a serial port to connect external

equipment, e.g. RTCM devices.

INCLINOMETER: Measures the pitch and roll. This means that ike can be

reliably used as a hand-held device, and does not need a tripod.

GPS ANTENNA CONNECTOR: For use with optional external GPS antenna.

WINDOWS MOBILE 5 COMPUTER: Forms can be tailor made using

ESRI® ArcPad Application Builder™. A Software Development Kit is

available, which allows further development in Microsoft® embedded

Visual Basic™ or embedded Visual C++™.

DIGITAL CAMERA:

A picture tells more than a thousand words.

Crosshairs show where the Laser Distance Meter is aiming, and

ensures the correct target is captured. The photo is locked together

with the target’s position and a timestamp in a GIS database.

LASER DISTANCE METER: Measures the distance to the target.

COMPASS: Measures the bearing to the target. Useful for storing the

directions from which photos are captured.

SEALED COVER: For access to removable memory card.

GPS: Captures the GPS position. When gathering data, ike’s position, or

the target position, can be used.

POWER:

Internal battery power for full day use.

Rechargeable with mains

adapter or vehicle charger.

Email: [email protected]

Web: www.survey-lab.com

HELPFUL HINTS

When capturing data, ensure you are standing in a location

with the clearest view of sky. This will allow a good GPS ﬁx.

Always keep ike on charge when not in use. Recharge your

ike in the car using the car charger provided.

Make sure you are happy with your data before saving.

To ensure crosshairs are saved with the photo, go to

DCA initial screen > Settings > Image > ensure Save

image with crosshair box is checked.

To remove data off ike permanently, check the option

Remove source ﬁles from ike after copy in ikesync

settings on your PC.

If ike doesn’t respond after

30 seconds, perform a soft

reset by inserting the stylus tip

into the hole above the External

GPS Antenna Connector, this

will reboot ike.

MAIN INTERFACE CABLE & CONNECTOR

To insert or remove the interface cable,

take hold of the grooved connector

sleeve, do not hold or twist the cable.

To insert connector, hold with the red dot at the top and insert,

push to lock.

To remove, ﬁrst pull the locking sleeve back, then pull out

connector to remove.

TO INSTALL THE SURVEYLAB SOFTWARE

ON YOUR PC

Insert the Surveylab software CD into your PC.

Run setup.exe.

Follow the on-screen instructions.

TRANSFERRING DATA TO AND FROM ike

USING YOUR PC

Important, please make sure both ArcPad and the DCA on

ike are fully closed before starting the download process.

(To close ArcPad tap ).

To transfer data between ike and your PC, you will need

to connect ike to your PC using the USB cable provided.

See the next page for cable connecting instructions.

Activesync will start automatically and ask if you want to set

up a partnership. Select Guest Partnership, click Next.

Start ikesync on the PC, Start > All Programs > Surveylab >

ikesync.

Within the ikesync menu click Tools > Settings to

select the directory where you want the data stored,

e.g. c:\ike\051231_exampledata.

Click the button ike Transfer to

Computer to start the download.

NOTE:

Users will need to have a licensed copy of ArcPad

installed on their desktop.

WELCOME TO YOUR ike

• Seamless GIS integration

• Easy to use

• Rugged and reliable

ABOUT THE ike

MAIN INTERFACE CABLE PORT: The main interface connector

cable connects to this port providing multi function capability. A USB

connection supports transferring data to and from a personal computer

using Microsoft® ActiveSync™ . The power connector connects with

ike compliant in-vehicle chargers, portable power pack and standard AC

adaptor. The RS232 connector provides a serial port to connect external

equipment, e.g. RTCM devices.

INCLINOMETER: Measures the pitch and roll. This means that ike can be

reliably used as a hand-held device, and does not need a tripod.

GPS ANTENNA CONNECTOR: For use with optional external GPS antenna.

WINDOWS MOBILE 5 COMPUTER: Forms can be tailor made using

ESRI® ArcPad Application Builder™. A Software Development Kit is

available, which allows further development in Microsoft® embedded

Visual Basic™ or embedded Visual C++™.

DIGITAL CAMERA:

A picture tells more than a thousand words.

Crosshairs show where the Laser Distance Meter is aiming, and

ensures the correct target is captured. The photo is locked together

with the target’s position and a timestamp in a GIS database.

LASER DISTANCE METER: Measures the distance to the target.

COMPASS: Measures the bearing to the target. Useful for storing the

directions from which photos are captured.

SEALED COVER: For access to removable memory card.

GPS: Captures the GPS position. When gathering data, ike’s position, or

the target position, can be used.

POWER:

Internal battery power for full day use.

Rechargeable with mains

adapter or vehicle charger.

Email: [email protected]

Web: www.survey-lab.com

HELPFUL HINTS

When capturing data, ensure you are standing in a location

with the clearest view of sky. This will allow a good GPS ﬁx.

Always keep ike on charge when not in use. Recharge your

ike in the car using the car charger provided.

Make sure you are happy with your data before saving.

To ensure crosshairs are saved with the photo, go to

DCA initial screen > Settings > Image > ensure Save

image with crosshair box is checked.

To remove data off ike permanently, check the option

Remove source ﬁles from ike after copy in ikesync

settings on your PC.

If ike doesn’t respond after

30 seconds, perform a soft

reset by inserting the stylus tip

into the hole above the External

GPS Antenna Connector, this

will reboot ike.

MAIN INTERFACE CABLE & CONNECTOR

To insert or remove the interface cable,

take hold of the grooved connector

sleeve, do not hold or twist the cable.

To insert connector, hold with the red dot at the top and insert,

push to lock.

To remove, ﬁrst pull the locking sleeve back, then pull out

connector to remove.

TO INSTALL THE SURVEYLAB SOFTWARE

ON YOUR PC

Insert the Surveylab software CD into your PC.

Run setup.exe.

Follow the on-screen instructions.

TRANSFERRING DATA TO AND FROM ike

USING YOUR PC

Important, please make sure both ArcPad and the DCA on

ike are fully closed before starting the download process.

(To close ArcPad tap ).

To transfer data between ike and your PC, you will need

to connect ike to your PC using the USB cable provided.

See the next page for cable connecting instructions.

Activesync will start automatically and ask if you want to set

up a partnership. Select Guest Partnership, click Next.

Start ikesync on the PC, Start > All Programs > Surveylab >

ikesync.

Within the ikesync menu click Tools > Settings to

select the directory where you want the data stored,

e.g. c:\ike\051231_exampledata.

Click the button ike Transfer to

Computer to start the download.

NOTE:

Users will need to have a licensed copy of ArcPad

installed on their desktop.

Table des matières

Autres manuels IKE Instrument de mesure

IKE

IKE 4 Manuel utilisateur

IKE

IKE 3 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur