Ikan PT4900-SDI Manuel utilisateur

www.ikancorp.com | 1.713.272.8822 | [email protected]

PT4900-SDI

Quick Start Guide

19” Professional High Bright Beam Splitter Teleprompter with 3G-SDI

OVERVIEW

Ikan’s professional teleprompter series is designed for a quick and easy setup to work in outside broadcast applications or professional

studios. The lightweight, aluminum teleprompter has multiple 3/8-16” and 1/4-20” for mounting to a pedestal or tripod. The high quality

70/30 (Made in the USA) teleprompter glass provides the perfect balance of reﬂection and pass-through minimal image distortion. The

PT4900’s high bright monitor has 1000 nits, making it appropriate for work in the sun or in brightly-lit studios. Ikan’s 4000 series of 15,17

& 19” teleprompters include 3 different riser plates, for compatibility with a variety of capture devices, including box cameras, camcorders,

DSLR, Mirrorless, and ENG cameras. The bottom mounting plate and riser plate have 12” of horizontal adjustment to accommodate various

camera body/lens conﬁgurations and proper balancing. This system is shipped in custom cut foam, designed to protect the glass, monitor and

additional components. This foam is compatible with SKB iSeries 3i-2217-12BE Waterproof Hard Cases.

www.ikancorp.com | 1.713.272.8822 | [email protected]

What’s Included

Large Riser

Bottom Plate

Hood Attachment Frame

Glass Frame Screws 15mm Rod Clamps 15mm Rods Large Riser

Bracket

Glass Holder Hood

Glass

Medium Riser

Base

DSLR/Mirrorless Riser

Glass Frame Holder Bracket

w/ Rod Clamps

www.ikancorp.com | 1.713.272.8822 | [email protected]

Teleprompter Assmebly Setup

Step 1

Place the Hood Attachment Frame over the Glass Holder. Then place the

glass against the Glass Holder. Make sure the screws pass through the

holes on the both the Hood Attachment Frame and the Glass Holder.

Step 3

Remove the monitor mounts from the teleprompter base using

the included larger 4mm hex key to loosen from the 15mm rods.

Step 4

Put the washers on before tightening the screws. The washers and 4

additional screws are inside a bag on the bottom foam.

Step 2

Secure the Glass Holder by fastening the knurled nuts to the screws as

pictured below.

www.ikancorp.com | 1.713.272.8822 | [email protected]

Step 5

After the monitor mounts are attached, adjust the 15mm rods to accommodate the monitor. Leave about 1 inch of room for the teleprompter bracket.

Make sure the 15mm rods go through both set of monitor mounts. Please ensure that all screws are properly tightened after inserting the monitor.

*SAFETY NOTE* Make sure to leave at least 2 inches of the rods inside the teleprompter base.

Teleprompter Base

Step 6

While sliding the teleprompter bracket into the slot of the Glass Frame

Holder Bracket, pull on the red knob to allow the bracket to fully slide in.

Step 7

Once the bracket is in place, tighten the side screw to lock in place.

Double check and make sure all the screws are tightened with the

included hex keys.

www.ikancorp.com | 1.713.272.8822 | [email protected]

Step 9

To prevent light from leaking through the hood, seal both zippers down.

Step 8

Fold the ﬂaps of the Hood alongside the edges of the Hood Attachment Frame. The ﬂaps of the Hood are magnetic so they will automatically attach.

www.ikancorp.com | 1.713.272.8822 | [email protected]

Step 10

Slide in the Riser plate of your choice by aligning the screws on the riser plate to the slot on the Base. Once the screws are aligned, Slide the riser plate into

the Base.

Step 10

Slide in the Riser plate of your choice by aligning the screws on the riser plate to the slot on the Base. Once the screws are aligned, Slide the riser plate into

the Base.

www.ikancorp.com | 1.713.272.8822 | [email protected]

Step 12

Mount your own tripod plate to the bottom plate by aligning the 1/4-20 and/or 3/8-16 screws and fastening them to the Bottom Plate. It is recommended

that you connect your tripod plate to front of the Bottom Plate so that you can balance your teleprompter easier. Once your tripod plate is connected to the

Bottom Plate, mount the tripod plate to your tripod head.

Step 13

Slide the entire teleprompter system into the Bottom Plate. Once the

teleprompter system is inserted, you can balance it by sliding it along the

Bottom Plate until the center of gravity is determined.

Step 14

Once the center of gravity has been determined, tighten the thumb screws

to keep the base from sliding.

www.ikancorp.com | 1.713.272.8822 | [email protected]

Step 15

To secure your teleprompter system, insert the included headless screws into the threads behind and in front of the Base.

Step 16

The headless screws should be inserted to the threads as pictured below.

www.ikancorp.com | 1.713.272.8822 | [email protected]

Monitor Ports

3G-SDI – Serial Digital Interface Connection

VGA – Video Graphics Array DE15 Connection

HDMI – High-Deﬁnition Multimedia Interface Input Connection

Power Port – 12-24v Input

HDMI – Switch HDMI input

VGA – Switch to VGA input

SDI – Switch to 3G-SDI input

Flip – Toggle image ﬂip

(Can be set to horizontal, vertical, or both via menu)

Up Arrow – Toggle up to adjust setting

Menu – Access to monitor settings

Down Arrow – Toggle down to adjust setting

Monitor Menu Settings

Video Conﬁg

Contrast (White Level)

Brightness (Black Level)

Tint (Chroma Hue)

Chroma (Chroma Saturation)

Sharpness (Detail)

RGB Setup – Manually conﬁgure RGB

Return

System Conﬁg

Menu Duration – Set duration of how long menu stays

on screen

Video Ratio – Set screen aspect ratio 16:9 or 4:3 (4:3 is

native resolution, 16:9 will create black bars)

Flip-H – Assign toggle button to ﬂip image horizontally

Flip-V – Assign toggle button to ﬂip image vertically

Reset – Factory reset

Return

PC Setup (Only available for VGA)

H-Position – Adjust horizontal position

V-Position – Adjust vertical position

Auto – Monitor automatically adjust position

Return

Exit

How to set-up FLIP button feature:

1. Press MENU button

2. Navigate to SYSTEM CONFIG.

3. Navigate to FLIP-V or FLIP-H

4. Change FLIP-V and/or FLIP-H to “ON”

5. Exit MENU

6. The FLIP button should now be activated and can be

pressed to mirror the image Horizontally or Vertically

7. When FLIP-H is ON, the image will ﬂip Horizontally

8. When FLIP-V is ON, the image will ﬂip Vertically

9. If both are ON, the FLIP button will toggle both

Horizontal and Vertical ﬂip

www.ikancorp.com | 1.713.272.8822 | [email protected]

Speciﬁcations

PT4900-SDI

Optional Accessories

PT4900-GM

PT19-SDI-TM

PT-PEDAL

PT-CASE-V2

Replacement Glass for PT4900

19” 3G-SDI Talent Monitor Add On Kit for PT4900

Teleprompter Foot Control Pedal

Rolling Hard Case for PT4900 Teleprompter

Aspect Ratio 4:3

Backlight LED

Brightness 1000 nits

Build Material Aluminum Chassis

Diagonal 19”

Input Signal 3G-SDI, HDMI, and VGA inputs

Input Voltage DC 12v / 4A

Power Consumption 10W

Reading Range 25’

Resolution 1280 x 1024

Viewing Angle 160° (H) / 170° (V)

Weight 33.75 lbs

Shipping Weight 36 lbs

Shipping Dimensions 25 x 20 x 16 in

Watch our VIDEO TUTORIAL on how to assemble Ikan Professional Telepromopters:

https://youtube.com/playlist?list=PLcjaK5n9Y8ctrbYS3t2g4nyx2uADOXjuF

Table des matières

Autres manuels Ikan Accessoires vidéo professionnels

Ikan

Ikan PT4500W-PEDESTAL Manuel utilisateur

Ikan

Ikan PT3500-P2P Manuel utilisateur

Ikan

Ikan PT3500-P2P-TK Manuel utilisateur

Ikan

Ikan PT4900-SDI-P2P Manuel utilisateur

Ikan

Ikan PT4500S-TM-PEDESTAL Manuel utilisateur

Ikan

Ikan PT4500W-TRIPOD-TK Manuel utilisateur

Ikan

Ikan PT-ELITE-U-RC Manuel utilisateur

Ikan

Ikan PT3100 Manuel utilisateur

Ikan

Ikan PT4900-P2P Manuel utilisateur

Ikan

Ikan PT3500 Manuel utilisateur

Ikan

Ikan PT3500-HB Manuel utilisateur

Ikan

Ikan PT4900-PTZ-TM-OTTICA Manuel utilisateur

Ikan

Ikan PT2500 Manuel utilisateur

Ikan

Ikan PT-ELITE-LS-RC Manuel utilisateur

Ikan

Ikan PT4200 Manuel utilisateur

Ikan

Ikan PT4000 Manuel utilisateur

Ikan

Ikan HomeStream HS-VCD-PRO Manuel utilisateur

Ikan

Ikan PT4900S-TMW Manuel utilisateur

Ikan

Ikan PT4900S-PTZ Manuel utilisateur

Ikan

Ikan PT4700S-PEDESTAL Manuel utilisateur

Ikan

Ikan PT4100 Manuel utilisateur

Ikan

Ikan PT4900-SDI-TK Manuel utilisateur

Ikan

Ikan PT-ELITE-PRO2-TK Manuel utilisateur

Ikan

Ikan PT4500W-PEDESTAL-TK Manuel utilisateur

Manuels Accessoires vidéo professionnels populaires d'autres marques

Yongnuo

Yongnuo YNSOFT Series Manuel utilisateur

Glidecam

Glidecam 2000 Pro Manuel utilisateur

PROAIM

PROAIM CINEMA Series Manuel utilisateur

Glide Gear

Glide Gear REVO 150 Manuel utilisateur

AUTOCUE

AUTOCUE SSPi Manuel utilisateur

PROAIM

PROAIM TP-ULTM-01 Manuel utilisateur

Sony

Sony VCT-SP2BP Manuel utilisateur

MRMC

MRMC Polymotion Chat Studio 3.1.0 Manuel utilisateur

CDA-TEK

CDA-TEK AFX Manuel utilisateur

ARRI

ARRI TRINITY Manuel utilisateur

Senna

Senna One Minute Long Crane Manuel utilisateur

PROAIM

PROAIM Gladiator Action Dolly Manuel utilisateur

Filmcity

Filmcity FC-TP100 Manuel utilisateur

CDA-TEK

CDA-TEK PBC Manuel utilisateur

PROAIM

PROAIM CINEMA Series Manuel utilisateur

PROAIM

PROAIM P-18-JS Manuel utilisateur

PROAIM

PROAIM CINEMA Series Manuel utilisateur

Flycam

Flycam Galaxy Arm & Vest Manuel utilisateur