8
OPERATING INSTRUCTIONS
• Plug the mains adaptor in to the back of the appliance and ensure that the
water tank is correctly positioned.
• Insert the plug into a mains socket.
• The LED display will show “- -“ when the unit is in stand-by mode.
• Press the power button to turn on the dehumidier – the dehumidify indicator
and the air purify indicator will light up, and the LED display will show the
humidity level of the room.
Note: If the water tank is not correctly positioned the indicator lights will not
illuminate.
• Once the water tank is full, the water tank indicator will light up and the
dehumidication will stop automatically.
• Turn off the power supply, then take out the water tank and remove the drain
cover to discard the collected water.
• Wipe and dry both the water tank and the dehumidier before inserting the
tank back into the unit to recommence dehumidication.
Using The Timer Function
• When the dehumidier is in stand-by mode, the timer button may be used to
set the desired time before the unit automatically switches on.
• Press the timer button once for each hour until the desired time is shown on
the LED display.The timer can be set between 1-24 hours.
• The dehumidier will automatically turn on and commence dehumidication
once the set time has been reached.
• When the dehumidier is powered on, the timer button may be used to set
the desired time before the unit automatically switches to stand-by mode.
• Press the timer button once for each hour until the desired time is shown on
the LED display.The timer can be set between 1-24 hours.
• The dehumidier will automatically turn to stand-by once the set time has
been reached.
Note: If the water tank reaches full capacity before the set time, the machine
will stop dehumidication automatically.