IGenix IG8300 Manuel utilisateur

1.5 LITRE JUG BLENDER WITH MINI CHOPPER

ATTACHMENT

Model Number: IG8300

INSTRUCTIONS FOR USE

Thank you for purchasing this product.

Please read these instructions carefully before use

SAFETY INSTRUCTIONS

Important: This appliance is not intended for use by persons including children with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

•Read all instructions before using this appliance.

•This appliance is for domestic use only. This appliance is for indoor use only. Do not use outdoors.

•Before using check that the voltage power corresponds to the one shown on the appliance nameplate.

•Do not let the cord hang over the edge of the table or counter.

•Do not operate this appliance if it has a damaged cord or plug, if it is not working properly or if it has been

damaged or dropped. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent

or a similarly qualified person in order to avoid a hazard.

•Close supervision is necessary when the blender is used by or near children.

•Avoid touching moving parts.

•The blades are sharp, so should be handled with care.

•Never use hot liquids in the blender or run it empty.

•Do not use any other accessory other than those supplied with the blender.

•The blender cannot be used for blending or chopping hard and dry substances otherwise the blade could be

blunted. The blender can be used for blending ice cubes.

•Always unplug the blender from the power socket when not in use, before putting on or taking off parts, and before

cleaning.

•To protect against electric shock, do not immerse the cord, plug or the motor unit in water or any other liquid.

•Be sure blending cover and chopping cover are securely in place before operating appliance.

•Keep hands and utensils out of glass jug while blending or chopping to reduce the risk of severe injury to persons

or damage to the blender. Ascraper may be used but must be used only when the blender is not running.

•To reduce the risk of injury, never place cutter-assembly blades on the base without the jug or chopper properly

attached.

•The appliance is not intended to be operated by means of an external timer or separate remote-control system.

•Children should be supervised to ensure that they do not play with the appliance.

•WARNING: It is hazardous for anyone other than a trained person to carry out any service or repair.

SPECIFICATIONS

Supply Voltage: 220-240V ~ 50/60Hz

Max Output: 500W

Measuring Cup

Jar Cover

Jar

Sealing Ring

Blending Blade

Jar Base

Motor unit

Speed Selector

Bowl Cover

Chopping Blade

Chopping Bowl

Bowl Base

Chopper Attatchment

Blender Attatchment

BEFORE THE FIRST USE

Check that all parts are complete and not damaged. Choose the appropriate attachment to perform your desired task.

The blender attachment is suitable for blending fruits, vegetables or crushing ice. The chopper attachment is suitable

for mincing meats or vegetables. Clean the attachment according to the section “CLEANING AND MAINTENANCE”.

WARNING: The blade is sharp, handle with great care and ensure that the blender is unplugged from socket

before assembling and removing parts.

BLENDER OPERATION

1. Place the jug on the motor unit, let the triangle align with the word “UNLOCK” on jug base

and then turn the jug clockwise until the triangle aligns with the word “LOCK”, a click will be

heard when locked into position properly. Please see Fig.1.

NOTE: There is a safety interlock device at the bottom of jug, if the jug is not

assembled in place, the blender will not operate.

2. Peel or core the fruits or vegetables and then cut into small pieces and put them into the jug.

A little water may need to be added to allow the smooth running of blender. The amount of

mixture should not exceed the max level as indicated on the jug, or sit lower the min level. The

best proportion of fruits or vegetables and water is 2:3.

NOTE: The blender is not suitable for beating egg white, mashing potatoes, mixing

dough or extracting juice from fruit and vegetables.

3. Replace jug cover on the jug.

4. You may add ingredients into the jug through the center opening of jug cover during operation, then replace

measuring cup if necessary. Let the tabs of measuring cup align with the grooves of jug cover, push down and turn the

measuring cup anti-clockwise until it is in place.

Fig. 1

8300

–

L Jug Blender

at a Glance

Jug

Jug Cover

Jug Base

5. Ensure the Speed Selector is set to “0” Position, then plug the blender into the power socket and set Speed

Selector to your desired setting. You can set the Speed Selector to the “P” position if want to accelerate the process of

blending. The detailed information is shown in Fig. 2 below.

NOTE: Make sure the jug cover is placed in position correctly before operating, and never open the jug

cover during operation.

Pulse

To start pulsing, hold the

knob to this position

To stop pulsing, release

the knob

Stop

To stop the appliance at any time

set the knob to this position

Lowest

Highest

6. Do not run the appliance for more than 3 minutes at a time. Wait until the unit has cooled to room temperature

before performing next operation cycle.

7. Turn the Speed Selector to “0” Position once the mixture has been blended to your desired consistency.

8. Turn the jug anti-clockwise and remove it from the motor unit. Carefully remove the jug cover, then pour and serve.

CHOPPER OPERATION

1. Place the motor unit on a flat horizontal surface and make sure it is unplugged.

2. Insert the chopping blade onto the central post of bowl. Please see Fig 3

3. Place the chopping bowl on the motor unit, align the triangle with the word “UNLOCK” on

bowl base. Then turn the bowl clockwise until the triangle aligns with the word “LOCK”, a click

will be heard when locked into position properly. Please see Fig. 4

NOTE: There is a safety interlock device at the bottom of bowl, if the bowl is not

assembled in place, the chopper will not operate.

4. Fill the chopping bowl with the required ingredients, place the cover on the bowl, and then

turn it clockwise until locked into position. Please see Fig.5

NOTE: The quantity of food the chopping bowl allows to chop is Max 100g for fruits or

vegetables and Max 150g for meat.

5. Ensure the Speed Selector is set to the “0” Position, then plug into power socket.

6. Select the desired speed setting, the appliance will start chopping. During chopping, you can

set the Speed Selector to “P” position if want to accelerate the process of chopping.

Fig. 3

Fig. 4

Fig. 2

Fig.

Highest

Lowest

Stop

To stop the appliance at any time set

the speed selector to this position

Pulse

To start pulsing, hold the

speed selector to this

position

To stop pulsing, release

the speed selector

7. Turn the Speed Selector to “0” Position once the ingredients have been chopped to your desired consistency. Allow

the blade to stop running completely before adding food or removing the chopping

cover.

8. Disconnect from power supply once finished. Open the chopping lid and carefully

pull out the blade with the plastic grip to remove the blade, then empty the bowl and

serve.

WARNING:

1. Never operate the appliance continuously for more than 3 minutes per time.

2. Blades are very sharp. Handle with care.

3. Do not operate without the jug or bowl cover in place.

CLEANING AND MAINTENANCE

Make sure to disconnect appliance from power supply before cleaning.

BLENDER

The Auto Clean function can clean the blender easily and rapidly in complete safety.

1. Pour a little warm soapy water into the jug and turn the Speed Selector to “P” position for a few seconds.

2. Remove the jug and rinse under running water.

3. Wipe the outer surface of motor unit with a damp cloth. Do not use abrasive cleaners and never immerse the

blender motor unit in water for cleaning

4. Dry all parts and then replace them.

After cleaning, you can hold the blending blade at the bottom of jug. Carefully take it out by

turning a couple of times clockwise, pushing the blunt side of the blades (see Fig.6). Put the

detachable accessories into the dishwasher for cleaning. The detachable accessories are

dishwasher safe, but the temperature should not exceed 70 degrees C.

If any problem is encountered during use, never disassemble the motor unit yourself. There

are no user serviceable parts inside.

CHOPPER

1. Pull out the chopping blade from the central post of the bowl. Only grasp the plastic part of the chopping blade to

prevent any injuries.

2. Immerse the blade, bowl and bowl cover into warm soapy water for cleaning, and then rinse them under running

water

NOTE: Do not disassemble the chopping bowl from the bowl base.

3. Wipe the outer surface with damp cloth.

4. Dry all parts thoroughly and assemble them in position.

ENVIRONMENT

Do not dispose of electrical appliances as unsorted municipal waste, use separate collection

facilities. Contact your local government for information regarding the collection systems available.

If electrical appliances are disposed of in landfill or dumps, hazardous substances can leak into the

groundwater and get into the food chain, damaging your health and well-being.

Fig. 5

Fig. 6

Distributed by Igenix at Pik-a-Pak Home Electrical

38 Bluestem Road, Ransomes Europark, Ipswich, IP3 9RR

Tel: 01473 271 272

www.igenix.co.uk

This product carries a 2 year guarantee.

If you experience any problems with your

Igenix product please call our Customer

Services Department on 01473 271 272.

Table des matières

Autres manuels iGenix Mixer

iGenix

iGenix IG8650 Manuel utilisateur

Manuels Mixer populaires d'autres marques

ROTOR

ROTOR 1125.201 Manuel utilisateur

Braun

Braun Multiquick 5 Vario series Manuel utilisateur

ARENDO

ARENDO MIRA 305424 Manuel utilisateur

CHEF-BUILT

CHEF-BUILT CCB-3500 Manuel utilisateur

Viconte

Viconte VC-4406 Manuel utilisateur

Oster

Oster BLSTAB-CB0 Manuel utilisateur

HOFFEN

HOFFEN MC-3005 Manuel utilisateur

Black & Decker

Black & Decker BLC18750DM Manuel utilisateur

Sunbeam

Sunbeam 4182 Manuel utilisateur

Bialetti

Bialetti FMX35 Manuel utilisateur

Black & Decker

Black & Decker BL8000 Manuel utilisateur

Duronic

Duronic BL530 Manuel utilisateur

Exquisit

Exquisit MS 3002 wes Manuel utilisateur

Lumme

Lumme LU-KP1891A Manuel utilisateur

Binatone

Binatone HB-735 Manuel utilisateur

Moulinex

Moulinex LM936E10 Manuel utilisateur

Oster

Oster VERSA Manuel d'installation et d'exploitation

Ninja

Ninja NN210Q Manuel utilisateur

iGenix IG8300 Manuel utilisateur

Manuels Mixer populaires d'autres marques