3
General safety instructions
1. Avoidance of risks to persons and property
• Only use the device supplied in accordance with the intended planning.
• Extensions and modifications to the device must only be carried out with our approval.
• Observe accident prevention regulations and system-specific safety instructions.
• Read and observe assembly and operating instructions.
2. Limitations of use
The device must only be used in accordance with the details in these operating
instructions or for the parameters agreed in the supply contract (see name plate) and the
application.
3. Avoidance of risks and damage
• Disseminate the assembly and operating instructions to the departments responsible
for “goods in, transport, assembly, commissioning and maintenance”.
• If this device is passed on to third parties these assembly and operating instructions in
the relevant language of the country must accompany it.
• Work on the device should only be carried out by trained staff specially commissioned
and exclusively with the current disconnected.
• Read and observe the assembly and operating instructions carefully and keep them in a
safe place.
• Take note of and follow the safety instructions printed in bold and highlighted
in the individual sections!
• When transporting, avoid e.g. knocks and putting down heavily, this can lead to
damage.
• For intermediate storage ensure that the storage location is suitable for the device.
The storage location must be dry and the device secured against damage.
4. Symbols
In these assembly and operating instructions safety instructions are specially marked
with the following symbols:
means that if they are not observed there is risk to life and / or
significant damage to property may occur.
Danger
means that attention is particularly drawn to technical requirements.
Take note
