IFM VSP003 Manuel utilisateur

Operating instructions

Acceleration sensor

VSP003

80268045/00 06/2017

1 Preliminary note

Technical data, approvals, accessories and further information at

www.ifm.com.

1.1 Symbols used

►Instructions

→Cross-reference

Important note

Non-compliance may result in malfunction or interference.

2 Safety instructions

• Read this document before setting up the product and keep it during the entire

service life.

• The product must be suitable for the corresponding applications and

environmental conditions without any restrictions.

• Only use the product for its intended purpose (→Functions and features).

• If the operating instructions or the technical data are not adhered to, personal

injury and/or damage to property may occur.

• The manufacturer assumes no liability or warranty for any consequences

caused by tampering with the product or incorrect use by the operator.

• Installation, electrical connection, set-up, operation and maintenance of the

product must be carried out by qualified personnel authorised by the machine

operator.

• Protect units and cables against damage.

3 Functions and features

The VSP003 acceleration sensor detects the vibration acceleration on non-rotating

components and is suitable for connection to the VSE evaluation unit.

4 Installation

►Mount only in a thick housing wall

(e.g. transport thread).

►Ensure that the signal direction is

correct.

►Ensure a safe vibration

transmission and allow no elastic

intermediate layers.

1: Tighten the sensor with a tightening torque of 8 Nm.

5 Electrical connection

The unit must be connected by a qualified electrician. The national and

international regulations for the installation of electrical equipment must be

adhered to.

M12

Pin 1: not connected

Pin 2: I

out

Pin 3: not connected

Pin 4: L-

5.1 Measuring range

Measuring range g ± 50

Measuring sensitivity mV/g 100 ± 5 %

Frequency range Hz 2...14000 ± 5 %

5.2 Use of a screened cable

►Use a screened cable to avoid conducted interference.

►Connect the screened cable to the DIN rail in the control cabinet.

►Maximum cable length 1000 m.

VSP VSE

1: screen

2: DIN rail

10.11: connection terminals sensor 1 to the VSE evaluation unit

►Take into account the operating instructions of the VSExxx evaluation unit for

acceleration sensors.

6 Maintenance, repair and disposal

The operation of the unit is maintenance-free. It is not possible to repair the unit.

After use dispose of the unit in an environmentally friendly way in accordance with

the applicable national regulations.

Table des matières

Autres manuels IFM Accessoires

IFM

IFM UGT58 Series Manuel utilisateur

IFM

IFM SB1 Series Manuel utilisateur

IFM

IFM KB Manuel utilisateur

IFM

IFM OY Series Manuel utilisateur

IFM

IFM PN01 A Series Manuel utilisateur

IFM

IFM efector 200 O4P2 Series Manuel utilisateur

IFM

IFM OJ51 Series Manuel utilisateur

IFM

IFM LX Series Manuel utilisateur

IFM

IFM OY4**S Series Manuel utilisateur

IFM

IFM O3M150 Instructions de montage

IFM

IFM Efector 200 O4P5 Series Manuel utilisateur

IFM

IFM SBT633 Manuel utilisateur

IFM

IFM KI0054 Manuel utilisateur

IFM

IFM Efector 100 GG712S Manuel utilisateur

IFM

IFM Efector 500 PY2068 Manuel utilisateur

IFM

IFM efector 200 OGP2 Series Manuel utilisateur

IFM

IFM Efector 200 O6E3 Manuel utilisateur

IFM

IFM UGR500 Manuel utilisateur

IFM

IFM Efector 200 Series Manuel utilisateur

IFM

IFM O8H2 Manuel utilisateur

IFM

IFM OID20 Series Manuel utilisateur

IFM

IFM OGD25 Series Manuel utilisateur

IFM

IFM OY Series Manuel utilisateur

IFM

IFM LW2120 Manuel utilisateur

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur