IFM OGH3 Series Manuel utilisateur

Operating instructions

Diffuse reflection sensor

with background suppression

OGH3xx

OGH5xx

704073 / 03 11 / 2019

1 Functions and features

The diffuse reflection sensor detects objects and materials without contact and

indicates their presence by a switching signal.

For the range see the type label (on white paper 200x200 mm, 90 % remission).

2 Installation

►Align the diffuse reflection sensor to the object to be detected.

►Secure the unit to a bracket.

The objects to be detected are to move

transversally to the lens of the sensor.

In case of other directions of movement it

should be tested before whether the swit-

ching function is guaranteed.

3 Electrical connection

►Disconnect power.

►Connect the unit as follows.

Cable Connector Pin connection

L+ BN pin 1

L- BU pin 3

load BK pin 4

load *) WH *) pin 2 *)

Core colours BN = brown, BU = blue, BK = black

*) Seulement pour des appareils avec sortie antivalente.

4 Operating and display elements

  

1: LED

2: [OUT o󰀨]

3: [OUT on]

4 Settings

4.1 The sensor is to switch when the object is detected

►Position the object.

► Press [OUT on] for 2 s.

> The sensitivity is set to the object.

> The LED flashes.

►Remove the object.

► Press [OUT off].

> The sensitivity is set without object.

> The LED goes out. The programming is finished.

4.2 The sensor is not to switch when the object is detected

► Position the object (see figure 1) and press [OUT off] for 2

► Remove the object (see figure 2) and press [OUT on].

The settings can also be carried out first without object and then with object.

4.3 Programming unsuccessful

> LED flashes quickly, 8 Hz.

Possible causes

• Measured value difference too small.

• Max. programming time of 15 min. exceeded.

4.4 Setting of maximum sensitivity

►Align the sensor so that no light is reflected.

The sensor is to switch when the object is detected

► First press [OUT on] and then [OUT off].

The sensor is to switch when the object is not detected

► First press [OUT off], then [OUT on].

4.5 Locking or unlocking the buttons

The unit can be locked electronically to prevent unintentional settings.

► Press [OUT on] and [OUT off] simultaneously for 

10 s.

> Acknowledgement is indicated by a change of the

LED status.

5 Operation

►Check whether the unit operates correctly.

> The LED lights when the switching output is switched.

6 Maintenance

►Keep the lens of the sensor free from soiling.

►For cleaning do not use any solvents or cleaning agents which could damage

the plastic lens.

Technical data and further information at www.ifm.com

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels IFM Accessoires

IFM

IFM PL205 Series Manuel utilisateur

IFM

IFM PF295 Series Manuel utilisateur

IFM

IFM SI 5000 Manuel utilisateur

IFM

IFM JN2301 Guide d'application

IFM

IFM UGT58 Series Manuel utilisateur

IFM

IFM SAxx04 Series Manuel utilisateur

IFM

IFM efector200 OOF Series Manuel utilisateur

IFM

IFM PQ3 Series Manuel utilisateur

IFM

IFM LR3009 Manuel utilisateur

IFM

IFM O1D111 Manuel utilisateur

IFM

IFM PT24 Series Manuel utilisateur

IFM

IFM Efector 200 OJ51 Series Manuel utilisateur

IFM

IFM O6P7 Series Manuel utilisateur

IFM

IFM PC3 Series Manuel utilisateur

IFM

IFM O1D120 Manuel utilisateur

IFM

IFM O3D300 Manuel utilisateur

IFM

IFM LT80 Series Manuel utilisateur

IFM

IFM Efector 200 Series Manuel utilisateur

IFM

IFM O5D10 Series Manuel utilisateur

IFM

IFM efector 200 O4H5 Series Manuel utilisateur

IFM

IFM PI16 Series Manuel utilisateur

IFM

IFM Efector 200 O5 Manuel utilisateur

IFM

IFM UIT509 Manuel utilisateur

IFM

IFM OMH551 Manuel utilisateur

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur