IFM Electronic OGE3 Series Manuel utilisateur

Operating instructions

Through-beam sensor

OGE3xx

OGS3xx

OGE5xx

OGS5xx

UKUK

11477262 / 00 08 / 2017

1 Functions and features

The through-beam sensor detects objects and materials without contact and

indicates their presence by a switching signal.

For the range see the type label.

2 Installation

transmitter receiver

►Install the receiver (OGE...) and secure it to a bracket.

►Align the transmitter (OGS...) to the receiver and fix it.

3 Electrical connection

►Disconnect power.

►Connect the unit as follows.

Transmitter

Cable Connector Pin connection

L+ BN pin 1

L- BU pin 3

— — pin 4

— — pin 2

Core colours BN = brown, BU = blue, BK = black

Receiver

Cable Connector Pin connection

L+ BN pin 1

L- BU pin 3

load BK pin 4

— — pin 2

Core colours BN = brown, BU = blue, BK = black

4 Operating and display elements

transmitter receiver

  

1: LED

2: [OUT o󰀨]

3: [OUT on]

4 Settings

4.1 The receiver is to switch when the object is detected

►Position the object.

receiver transmitter

► Press [OUT on] for 2 s.

> The sensitivity is set to the object.

> The LED flashes.

►Remove the object.

receiver transmitter

► Press [OUT off].

> The sensitivity is set without object.

> The LED goes out. The programming is finished.

4.2

The receiver is not to switch when the object is detected

► Position the object (see figure 1) and press [OUT off] for 2

► Remove the object (see figure 2) and press [OUT on].

The settings can also be carried out first without object and then with object.

4.3 Programming unsuccessful

> LED flashes quickly, 8 Hz.

Possible causes

• Insufficient difference in measurements.

• Max. programming time of 15 min. exceeded.

4.4 Setting of maximum sensitivity

►Align the receiver so that no light is received.

The receiver is to switch when the object is detected.

► First press [OUT on] and then [OUT off].

The receiver is to switch when the object is not detected.

► First press [OUT off], then [OUT on].

4.5 Locking or unlocking the buttons

The unit can be locked electronically to prevent unintentional settings.

► Press [OUT on] and [OUT off] simultaneously for 

10 s.

> Acknowledgement is indicated by a change of the

LED status.

5 Operation

►Check whether the sensors operate correctly.

> The receiver LED lights when the switching output is switched.

6 Maintenance

►Keep the lenses of the sensors free from soiling.

►For cleaning do not use any solvents or cleaning agents which could damage

the plastic lenses.

Technical data and further information at www.ifm.com

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels IFM Electronic Capteur de sécurité

IFM Electronic

IFM Electronic efector 200 OGH38 Series Manuel utilisateur

IFM Electronic

IFM Electronic efector 500 PF20 Manuel utilisateur

IFM Electronic

IFM Electronic efector100 ID002A Manuel utilisateur

IFM Electronic

IFM Electronic OPU2 Series Manuel utilisateur

IFM Electronic

IFM Electronic DA102S Manuel utilisateur

IFM Electronic

IFM Electronic efector300 SI0104 Manuel utilisateur

IFM Electronic

IFM Electronic OPU70 Series Manuel utilisateur

IFM Electronic

IFM Electronic efector200 OPU2 Series Manuel utilisateur

IFM Electronic

IFM Electronic efector500 PI2658 Manuel utilisateur

IFM Electronic

IFM Electronic efector150 Manuel utilisateur

IFM Electronic

IFM Electronic LR2050 Manuel utilisateur

IFM Electronic

IFM Electronic OPL2 Series Manuel utilisateur

IFM Electronic

IFM Electronic efector 200 O4H5 Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector500 PF2058 Manuel utilisateur

IFM Electronic

IFM Electronic Efector 200 OJ5114 Manuel utilisateur

IFM Electronic

IFM Electronic Efector 500 PN20 Series Manuel utilisateur

IFM Electronic

IFM Electronic efector200 OJ50 laser Manuel utilisateur

IFM Electronic

IFM Electronic efector200 O6T3 Manuel utilisateur

IFM Electronic

IFM Electronic LT80 Series Manuel utilisateur

IFM Electronic

IFM Electronic efector 500 PN73 Series Manuel utilisateur

IFM Electronic

IFM Electronic efector300 SM7100 Manuel utilisateur

IFM Electronic

IFM Electronic efector300 SA1003 Manuel utilisateur

IFM Electronic

IFM Electronic efector300 SM8001 Manuel utilisateur

IFM Electronic

IFM Electronic efector500 PI2058 Manuel utilisateur

Manuels Capteur de sécurité populaires d'autres marques

THORLABS

THORLABS PDA10JT Manuel utilisateur

Waeco

Waeco UV-DETECT Manuel utilisateur

Intermatic

Intermatic IOS-DSIMF Manuel utilisateur

urmet domus

urmet domus 1083 Manuel utilisateur

Siemens

Siemens AZL66 Series Manuel utilisateur

BTI

BTI Profiline Multi Finder Manuel utilisateur

Challenger

Challenger SL01 Manuel utilisateur

DMP Electronics

DMP Electronics 1122INT Manuel utilisateur

Rielta

Rielta Ladoga MK-RK Manuel utilisateur

Mirion Technologies

Mirion Technologies ACCURAD PRD Manuel utilisateur

Bosch

Bosch DS835 Manuel utilisateur

DBI SALA

DBI SALA EZ Stop Manuel de l'opérateur

Lamptime

Lamptime ST05C Manuel utilisateur

Ubiquiti

Ubiquiti MFI-MSC Manuel utilisateur

Subsite

Subsite 910R Instructions d'installation

Satel

Satel OPAL Pro Manuel utilisateur

Aleph

Aleph XC-1XTEU Manuel utilisateur

Pima

Pima LARIS QUAD Manuel utilisateur