ID Card Printer - User Manual
SAFETY INSTCTIONS:
To prevent electric shock do not remove covers.
Do not aempt to service the printer yourself.
There are no user serviceable parts inside (either printer or dye lm). In the event of malfuncon, contact your
printer/consumable supplier.
This product is only to be used ith the Por ource supplied at point of purchase.
Take care not to spill any liquid on the printer.
Then handling the printer avoid touching the prinng edge of the Thermal Print Head. Any grease and
contaminaon ill shorten its life.
efore transporng the printer, remove dye lm & card hoppers and pack the printer in its original packaging to
reduce the likelihood of damage in transit. IDville is not responsible for printers/items inadequately packaged.
CATION:
Unapproved changes or modcaons to the equipment to the equipment could void the User’s authority to
operate the printer and ect any related arranty claim.
If using this printer in Germany
To provide adequate short shocircuit protecon and ovecurrent protecon for this printer, the building
installaon must be protected by a 16 Amp circuit breaker.
ei Anschluß des Druckers an die tromversorgung muß sichergestellt erden, daß die Gebäudeinstallaon mit
eineÜberstromschalter abgesichert ist.
GENAL INF
This document contains proprietary informaon belonging to Magicard Ltd. and may not be holly or parally
copied, stored in a data retrieval system, or used for any purpose other than that for hich it as supplied,
ithout the express rien authority of Magicard Ltd. All rights are reserved.
The HoloKote feature is protected by UPATENT No: 5,990,918 and by EUROPEAN PATENT PECIFICATION
EP 0 817 726 1.
Copyright © 2011 Magicard Limited.
Magicard Ltd. shall not be liable for errors contained herein or for incidental consequenal damages in connecon
ith the furnishing, performance or use ofthis material. Magicard Ltd. reserves the right to change the content of
this document ithout prio
3
