IDTECH SREDKey 2 Manuel d'utilisation et d'entretien

ID TECH

10721 Walker Street, Cypress, CA 90630

Voice: (714) 761-6368 Fax: (714) 761-8880

idtechproducts.com

SREDKey 2

Integration Manual

80172501- 001 Rev. H

26 July 2021

ID TECH SREDKey 2 Integration Manual

Page | 2

This document, as well as the software and hardware described in it, is furnished under license and

may be used or copied online in accordance with the terms of such license. The content of this

document is furnished for information use only, is subject to change without notice, and should not

be construed as a commitment by ID TECH. While every effort has been made to ensure the accuracy

of the information provided, ID TECH assumes no responsibility or liability for any unintentional errors

or inaccuracies that may appear in this document. Except as permitted by such license, no part of this

publication may be reproduced or transmitted by electronic, mechanical, recording, or otherwise, or

translated into any language form without the express written consent of ID TECH.

ID TECH and ViVOpay are trademarks or registered trademarks of ID TECH.

Warranty Disclaimer

The services and hardware are provided "as is" and "as-available" and the use of the services and

hardware are at its own risk. ID TECH does not make, and hereby disclaims, any and all other express

or implied warranties, including, but not limited to, warranties of merchantability, fitness for a

particular purpose, title, and any warranties arising from a course of dealing, usage, or trade practice.

ID TECH does not warrant that the services or hardware will be uninterrupted, error-free, or

completely secure.

ID TECH SREDKey 2 Integration Manual

Page | 3

Table of Contents

1. INTRODUCTION...............................................................................................................................................................5

2. ACRONYMS USED AND APPLICABLE DOCUMENTS...................................................................................................5

3. FEATURES ........................................................................................................................................................................ 5

4. SPECIFICATIONS..............................................................................................................................................................6

5. BASE FUNCTIONALITY AND OPERATIONS..................................................................................................................7

5.1. Function Key Operation........................................................................................................................................7

5.2. Admin Menu ..........................................................................................................................................................7

5.3. Manually Keyed Configuration Operations........................................................................................................7

5.4. SREDKey 2 LED Behavior.....................................................................................................................................8

5.5. Tamper and Failed Self-Check Indicators ..........................................................................................................8

6. FIRMWARE COMMAND STRUCTURE...........................................................................................................................9

6.1. Response from SREDKey 2..................................................................................................................................9

7. GENERAL COMMANDS................................................................................................................................................ 11

7.1. IDG Protocol Commands................................................................................................................................... 11

7.1.1. Get Firmware Version (29-00)..........................................................................................................................................................11

7.1.2. Get Key Status (81-0C).........................................................................................................................................................................11

7.1.3. Reboot Device (77-05)..........................................................................................................................................................................12

7.1.4. Set TransArmor Cert Data (C7-50).................................................................................................................................................12

7.1.5. Set TransArmor ID (C7-51).................................................................................................................................................................12

7.1.6. Get TransArmor ID (C7-52).................................................................................................................................................................12

7.2. NGA Protocol Commands ................................................................................................................................. 13

7.2.1. Get Model Number (78 46 20).........................................................................................................................................................13

7.2.2. Get Detailed Firmware Version (78 46 31)................................................................................................................................13

7.2.3. Reboot Device (78 46 CC)....................................................................................................................................................................13

7.2.4. Reset Device (C7 80): HID Mode......................................................................................................................................................14

7.3. ITP Protocol Commands.................................................................................................................................... 14

7.3.1. Reset Device (53 18): KB Mode........................................................................................................................................................14

8. USING THE SREDKEY 2 AND USDK DEMO APPLICATION ...................................................................................... 15

8.1. Using the Universal SDK Demo Application.................................................................................................... 16

8.2. Updating SREDKey 2 Firmware........................................................................................................................ 17

8.3. Enabling and Disabling the SREDKey 2 Admin Key....................................................................................... 19

8.4. Switching a SREDKey 2 Between USB-KB and USB-HID Modes ................................................................ 19

8.5. Testing a SREDKey 2 Device............................................................................................................................. 20

9. DATA OUTPUT FORMAT.............................................................................................................................................. 23

9.1. ID TECH Swipe Data Original Encryption Output Format.............................................................................. 23

9.1.1. ISO/ABA Card.............................................................................................................................................................................................23

9.1.2. Non-Financial Card..................................................................................................................................................................................24

9.2. ID TECH Swipe Data Enhanced Encryption Output Format.......................................................................... 25

9.2.1. ISO/ABA Card Data Output Format...............................................................................................................................................25

9.2.2. NON-ISO/ABA Data Output Format..............................................................................................................................................26

9.3. ID TECH Manual Entry Original Data Output Format..................................................................................... 27

9.4. ID TECH Manual Entry Enhanced Data Output Format................................................................................. 28

10. NOTES.......................................................................................................................................................................... 30

10.1. Note 1: Card Encode Type............................................................................................................................... 30

10.1.1. Encoding Methods................................................................................................................................................................................30

ID TECH SREDKey 2 Integration Manual

Page | 4

11. NOTE 2: TRACK 1-3 STATUS BYTE .......................................................................................................................... 31

11.1.1. Field 4..........................................................................................................................................................................................................31

11.1.2. Field 10: Optional byte length........................................................................................................................................................31

11.1.3. Field 11: Optional status byte 1...................................................................................................................................................31

11.2. Note 3: Clear/mask data sent status............................................................................................................ 31

11.2.1. Field 8: Clear/masked data sent status byte:........................................................................................................................31

11.3. Note 4: Encrypted/Null Hash data sent status............................................................................................ 32

11.3.1. Field 9: Encrypted data sent status ............................................................................................................................................32

11.4. Data Sample..................................................................................................................................................... 32

11.4.1. Manual Entry Original Format.......................................................................................................................................................34

11.4.2. Manual Entry Enhanced Format...................................................................................................................................................35

12. TAMPER ERROR CODE TABLE ................................................................................................................................. 37

13. DECOMMISSIONING SRED DEVICES....................................................................................................................... 37

14. 24-HOUR DEVICE REBOOT....................................................................................................................................... 37

15. TROUBLESHOOTING.................................................................................................................................................. 37

16. FOR MORE INFORMATION ....................................................................................................................................... 37

17. APPENDIX A: SETTING CONFIGURATION PARAMETERS AND VALUES (ITP PROTOCOL) ............................... 38

18. REVISION HISTORY.................................................................................................................................................... 42

ID TECH SREDKey 2 Integration Manual

Page | 5

1. Introduction

ID TECH’s SREDKey 2 is an encrypting keypad with an LCD and is available either with an encrypted

MagStripe reader and without. The SREDKey 2 is a reliable security solution that meets PCI PTS 5.X

perfect for a P2PE environment. This device delivers superior reading performance while encrypting

sensitive MagStripe and keyed-in data reducing PCI-DSS scope.

2. Acronyms Used and Applicable Documents

ANSI

American National Standard Institute

ESD

Electrostatic Discharge

HOST A Personal Computer or Similar Computing Device

ISO

International Standards Organization

USB

Universal Serial Bus

AAMVA

SREDKEY

American Association of Motor Vehicle Administrators

Secure Reading and Exchange of Data

ISO/IEC 7813: The general requirements standards are identification cards and physical

characteristics.

ISO/IEC 7811: The general requirements standards are identification cards, recording techniques, and

magnetic stripe.

3. Features

•Encrypted numeric keypad with 2.9” (diagonal) LCD and optional encrypted MSR

•1,000,000 swipes: industry proven Magnetic Stripe Reader

•1,000,000 manual key entry

•4,000,000 key operations for each key

•Meets FCC Class B & CE regulatory requirements

•Plug-n-Play operation for USB-Keyboard and USB-HID interface

•PCI PTS 5.X certified with SREDKey 2 function supported

•ROHS 2 and REACH certified

•Secure mounting option

•TDES/AES with DUKPT Key Management

•MSR support Track 1,2,3 reading

•MSR support ISO 7810 and 7811-1 through -6 cards. Reads AAMVA driver license cards

•Battery Life of 5-Years

•Operating Temperature: 32º F to 131º F (0º C to 55º C) non-condensing

•Storage Temperature: -4º F to 149º F (-20º C to 65º C) non-condensing

ID TECH SREDKey 2 Integration Manual

Page | 6

4. Specifications

Physical

Length

160.4mm

Width

96.7mm

Height

37.4mm

Weight

310g

Environmental

Operating Temp

-10

℃

to 55

℃

non-condensing

Storage Temp

-20

℃

to 65

℃

non-condensing

Humidity

Maximum 90% non-condensing

Electrical

Input

5V USB connection

Working

100 mA

Sleep

2mA

Screen

Resolution

240x64

Size

2.9” diagonal

ID TECH SREDKey 2 Integration Manual

Page | 7

5. Base Functionality and Operations

When the SREDKey 2 is powered on it enters Data Capture Mode, prompting a user to key-in data.

If the SREDKey 2 has not been injected with a key and encryption is not enabled, it displays “Missing

Transaction Keys” after the user presses any key. Evaluation units come injected with the ID TECH

demo key by default, and data can be decrypted using ID TECH’s Universal SDK DEMO.

5.1. Function Key Operation

•Left Arrow key Clicking the (backspace) key allows users to remove entered data one

character at a time.

•#Admin: Clicking the #Admin key when the screen displays “Swipe or Hand-Key Card

Number” or “Enter Card Number then press Enter” allows users to enter the Admin Menu.

Clicking the #Admin key in other screens puts the device in the Help Mode.

•Cancel: Clicking the Cancel key once allows the users to remove all the input in the current

and previous levels. The device then returns to the previous prompt for the current

transaction. When the Cancel key is pressed twice, the current transaction is cancelled, and

the device goes back to the initial mode.

Note: See Enabling and Disabling the SREDKey 2 Admin Key for instructions on turning the Admin

key on and off.

5.2. Admin Menu

To select one of six manual entry modes, click the Admin key and the screen will display "Select

manual config 1-6".

5.3. Manually Keyed Configuration Operations

Configuration #1:

Card Number, Expiration Date

Configuration #2:

Card Number, Expiration Date, Zip

Configuration #3:

Card Number, Expiration Date, Street Number of the Address, Zip Code

Configuration #4:

Card Number, Expiration Date, Security Code, Zip Code

Configuration #5:

Card Number, Expiration Date, Security Code, Street Number, Zip Code

Configuration #6:

Card Number, Expiration Date, Security Code

ID TECH SREDKey 2 Integration Manual

Page | 8

5.4. SREDKey 2 LED Behavior

SREDKey 2 units have an LED below the LCD screen that indicates device status.

Device State

Unit Ready

●

Unit Tampered

●

Flashing

Unit Missing Transaction Key

●

5.5. Tamper and Failed Self-Check Indicators

The SREDKEY 2 displays the following indicators when it has been tampered or has any of the other

following internal issues, such as an expired certificate, missing key, or similar fault discovered during

a self-check.

Indicator

Tampered Status

Other Issue Status

LED Indicator

Red LED

Amber LED: no DEK

LCD Display Message

The screen’s top line reads

“Tampered" and indicates the

source of the tampering on

the bottom line.

If FW is downloaded at first

time, show "Deactivated"

If device is activated, but no

LCL-KEK, show "Activated"

If LCL-KEK exist but no DEK,

show "Need client key”

The SREDKEY 2’s LCD display can indicate the following issues in the event of a failed self-check:

•"Deactivated" indicates the reader has firmware but is not activated.

•"Activated" indicates the reader is activated but does not have an LCL-KEK.

•"Need client key" indicates the reader has an LCL-KEK, but no DEK.

ID TECH SREDKey 2 Integration Manual

Page | 9

6. Firmware CommandStructure

The following are commands sent to keypad/reader:

•Setting Command: <STX><S>[<FuncID><Len><FuncData>…] <ETX><LRC>

•Read Status Command: <STX><R><FuncID><ETX><LRC>

•Function Command: <STX>[<FuncID><Len><FuncData>…] <ETX><LRC>

6.1. Response from SREDKey 2

Setting Command

Host

SREDKey 2

Setting command





<ACK> if OK



<NAK> if Error

Read Status Command

Host

SREDKey 2

Read Status command





<ACK>

and

if OK



<NAK> if Error

Other Commands

Host

SREDKey 2

Other command





<ACK> and <Response> if OK



<NAK> if Error

<Response> format:

The current setting data block is a collection of many function-setting blocks <FuncSETBLOCK> as

follows:

Each function-setting block <FuncSETBLOCK> has the following format:

ID TECH SREDKey 2 Integration Manual

Page | 10

Where:

•<FuncID> is one-byte identifying the setting(s) for the function.

•<Len> is a one-byte length count for the following <FuncData> function-setting block.

•<FuncData> is the current setting for this function. It has the same format as the function’s

sending command.

•<FuncSETBLOCK> are in the order of their Function ID<FuncID>.

Where:

<STX>

02h

<S>

Indicates setting commands; 53h

<R>

Indicates read setting commands; 52h

One-byte Function ID identifies the particular function or settings affected

<Len>

One-byte length count for the following data block <FuncData>

Data block for the function

<ETX>

03h

<LRC>

The overall Modulo 2 (Exclusive OR) sum (from <STX> to <LRC>) should be zero

<ACK>

06h

<NAK>

15h

Table des matières

Autres manuels IDTECH Clavier

IDTECH

IDTECH SmartPIN L100 Manuel utilisateur

Manuels Clavier populaires d'autres marques

BFT

BFT SELETTO Manuel utilisateur

Micro Id

Micro Id MP7G3BL Manuel d'instructions

WindowMaster

WindowMaster WLI 130 Manuel utilisateur

ACT

ACT ACT PRO 1030 Manuel utilisateur

Cardin

Cardin SSB Series Manuel utilisateur

Harman Kardon

Harman Kardon KP 1 Manuel utilisateur

Chamberlain

Chamberlain KPR2000 Guide de l'utilisateur

CYP

CYP CR-KP1 Manuel utilisateur

Aeware

Aeware k-35 Series Guide de référence

Aritech

Aritech CS-175 Series Manuel utilisateur

GE NetworX NX-1600E Series Manuel utilisateur

Lenze AC Tech

Lenze AC Tech MC SERIES Manuel utilisateur

Burg Wächter

Burg Wächter secuENTRY 7711 Manuel utilisateur

Aeware

Aeware in.k450 Manuel utilisateur

Lenze

Lenze EPM-H410 Manuel utilisateur

Toshiba

Toshiba RKP007Z Manuel utilisateur

Gemini

Gemini GEM-DXK1 KEYPAD Manuel utilisateur

Russound

Russound MDK-C5 Manuel d'utilisation