Idis DA-JB4100 Manuel utilisateur
DA-JB4100 INSTALLATION MANUAL
This manual is intended for users of the DA-JB4100 junction box. It
includes instructions for mounting the DA-JB4100 junction box to a wall.
• This junction box is intended to be used with some models of
cameras. Do not use it with other models of cameras.
• This installation should be performed by a qualied service
personnel in conformance to all local codes.
• You may need to reinforce the wall. If the wall is not strong
enough to support the camera, the camera may fall.
• Do not use this product for other purposes.
Mounting
Mount the junction box to the wall and connect your camera as follows:
Junction Box
Wall
1 Mount the junction box to the wall by using the screws and the anchors.
Use the provided guide pattern to check the distance between the screw holes if necessary.
Bushing
IDIS Co., Ltd.
For more information, please visit www.idisglobal.com
2 Insert the bushing to the junction box. Match the cable hole of the product, the projection of the
silicon bushing, and the PT 3/4" cap.
3 Insert cables from external devices, network and power adapter to the junction box like a round
wound.
4 Screw the camera to the bushing.
Before xing the product, make sure to seal the inside of the bracket and the hole to the wall with
silicone seal.
Dimensions
Unit: mm (inch)
PT 3/4"
4-
2-
4-R3
110.8 (4.36)
4-M4TAP
110.8 (4.36)
61.5 (2.42)
64 (2.51)
46.75 (1.84)
32 (1.25)
72 (2.83)
72 (2.83)
5.5 (0.21)
25 (0.98)
Ver.1.0
Table des matières
Autres manuels Idis Accessoires pour appareils photo
Idis
Idis DA-FM1500 Manuel utilisateur
Idis
Idis DA-JB2400 Manuel utilisateur
Idis
Idis DA-WM4200 Manuel utilisateur
Idis
Idis FM1400 Manuel utilisateur
Idis
Idis DA-TM1100 Manuel utilisateur
Idis
Idis DA-JB2300 Manuel utilisateur
Idis
Idis DA-BH1100 Manuel utilisateur
Idis
Idis DA-TM4100 Manuel utilisateur
Idis
Idis DA-WM1200 Manuel utilisateur
Idis
Idis DA-BM1100 Manuel utilisateur
