Idex FAST&FLUID SK300 CE Manuel utilisateur
Manual SK300 CE
V. 1.0 Fast & Fluid Management B. V.
www.fast-fluid.com
2
© Fast & Fluid Management B.V.
This manual or parts thereof may not be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, photocopying, recording, nor otherwise, without the prior written permission of Fast & Fluid
Management B.V.
This manual could contain technical inaccuracies or typographical errors.
Fast & Fluid Management B.V. reserves the right to revise this manual from time to time in the contents thereof without the
obligation of Fast & Fluid Management B.V. to notify any person of such revision or change.
Details and values given in this manual are average values and have been compiled with care. They are not binding, however,
and Fast & Fluid Management B.V. disclaims any liability for damage or detriments suffered as a result of reliance on the
information given herein or the use of products, processes or equipment to which this manual refers. No warranty is made that
the use of the information or of the products, processes or equipment to which this manual refers will not infringe any third
party's patents or rights. The information given does not release the user from making their own experiments and tests.
Table of Contents SK300 CE V. 1.0
3
Table of Contents
1 About this manual ........................................................................................................5
1.1
How to work with the manual............................................................................................5
1.2
Record of changes............................................................................................................ 5
2 Safety ............................................................................................................................6
2.1
Intended use.....................................................................................................................6
2.2
Liability..............................................................................................................................6
2.2.1
General liability .....................................................................................................6
2.2.2
Machine-specific liability .......................................................................................6
2.3
User qualification for installation.......................................................................................7
2.4
CE certification .................................................................................................................7
2.5
Safety symbols on the machine........................................................................................7
2.6
Safety symbols in the manual...........................................................................................8
2.7
Disposal of the machine ...................................................................................................8
3 Operator manual...........................................................................................................9
3.1
Description........................................................................................................................9
3.1.1
Overview of the machine ......................................................................................9
3.1.2
Overview of the control panel .............................................................................10
3.1.3
Factory default shake times................................................................................10
3.1.4
Type plate: serial number ...................................................................................10
3.1.5
Type plate: details ..............................................................................................11
3.2
Operation........................................................................................................................11
3.2.1
Turning on the machine......................................................................................11
3.2.2
Turning on the machine when the machine is in hibernation..............................11
3.2.3
General shaking procedure ................................................................................11
3.2.4
Placing the can ...................................................................................................12
3.2.5
Start the machine ...............................................................................................13
3.2.6
Remove the can .................................................................................................14
3.2.7
Stop the operation manually...............................................................................14
3.2.8
Using the emergency stop switch.......................................................................14
3.2.9
Restart the machine ...........................................................................................15
3.3
Maintenance ...................................................................................................................15
3.3.1
General safety instructions for maintenance ......................................................15
3.3.2
General cleaning: after every operation .............................................................15
3.3.3
Periodic maintenance: weekly ............................................................................15
3.3.4
Periodic maintenance: monthly ..........................................................................15
4 lnstallation ..................................................................................................................16
4.1
Unpack the machine.......................................................................................................16
4.1.1
Remove the cardboard .......................................................................................16
Table of Contents SK300 CE V. 1.0
4
4.1.2
Remove the plastic foil .......................................................................................16
4.1.3
Unlock the machine ............................................................................................17
4.1.4
Remove the wooden blocks ...............................................................................17
4.1.5
Remove the transport brackets ..........................................................................18
4.1.6
Dispose of the packaging material .....................................................................18
4.2
Put the machine in position.............................................................................................18
4.2.1
Move the machine from the pallet ......................................................................18
4.2.2
Move the machine to the final location ...............................................................18
4.2.3
Level the machine ..............................................................................................19
4.3
Finish the installation ......................................................................................................19
5 Troubleshooting .........................................................................................................20
5.1
General troubleshooting procedure ................................................................................20
5.2
Contact service...............................................................................................................20
5.3
Error messages and other faults.....................................................................................20
6 Technical data ............................................................................................................21
6.1
General specifications ....................................................................................................21
6.2
Dimensions and mass ....................................................................................................21
6.3
Ambient conditions .........................................................................................................21
6.4
Noise level ......................................................................................................................21
6.5
Safety classifications ......................................................................................................22
6.6
Electrical specifications ..................................................................................................22
6.7
Electrical diagram ...........................................................................................................23
About this manual V. 1.0
5
SK300 CE
1
About this manual
The manual shows the information necessary to:
- install
- operate
- perform basic maintenance
- correct small problems
The SK300 and all its versions are referred to in the manual as the 'machine'.
This manual contains the original instructions. The original language of the manual is English. All other language
versions are translations of the original instructions.
1.1
How to work with the manual
For the safe use of the machine, it is important:
1 To familiarize yourself with the structure and content.
2 To read the safety chapter in detail and make sure you understand all the instructions. See chapter 2.
3 To carry out the actions completely and in the given sequence.
1.2
Record of changes
Edition Editor Check Date Description
1.0 12/2020 First edition
Safety V. 1.0
6
SK300 CE
2
Safety
WARNlNG
Read the manual before you install or use the machine. Failure to do so can result in personal
injury, death or property damage.
2.1
lntended use
The machine is designed to shake colorants in a can. Any other use of the machine is strictly forbidden.
2.2
Liability
2.2.1 General liability
Our machines and accessories are fully compliant with the CE regulations. Any modification can result in not
fulfilling the CE safety requirements and is therefore not allowed. Fast & Fluid Management B.V. will not accept
any responsibility in case of modifications to machines and/or accessories.
Fast & Fluid Management B.V. is not liable if you do not follow the rules below:
- The machine is for indoors use only.
- This machine may only be used for commercial settings. The machine is not a household appliance.
- Observe all local safety regulations.
- Strictly obey the safety instructions in this manual.
- Mind the minimal requirement of the building structure of the load capacity of the floor.
- Place machine in a well-lit and well-ventilated room.
- Install and connect the machine according to the instructions in this manual.
- Connect the machine to a grounded wall socket.
- Do not use extension cords or inadequately rated power cables.
- Make sure that the power cable is freely accessible.
- Do not place objects on top of the machine.
- Keep lids, panels, and covers closed and in place whenever possible.
- Do not use a damaged machine. When you have doubts, contact your supplier.
- Keep the machine in good condition.
- Clean the machine at the intervals and when dirty.
- Make sure that defective parts are immediately replaced.
- Remove spilled liquids immediately, and unplug the machine in case of large spillages (> 500mL).
- Replace parts only with original Fast & Fluid Management B.V. spare parts.
All maintenance beyond the scope of this manual must be carried out by a qualified service technician that Fast
& Fluid Management B.V. has trained and certified.
2.2.2 Machine-specific liability
The machine cannot be used in an environment where explosive vapours may occur (ATEX zone). Colorants
that contain flammable solvents can be mixed, as long as they are packed in a suitable UN approved container.
Please consult the health & safety officer of your paint supplier and/or colorant supplier on how to avoid the
emergence of hazardous situations like personal harm or the risk for fire and explosion.
Safety V. 1.0
7
SK300 CE
- Personal harm should be avoided by strictly following the materials safety data sheets (MSDS) for colorants
and (base) paint.
- The use of flammable colorants or colorants that diffuse potential explosive vapors may present fire and
explosion risks.
2.3
User qualification for installation
Only install the machine when you are a qualified service technician who is trained and certified by Fast & Fluid
Management B.V.
2.4
CE certification
The machine is CE certified. This means that the machine complies with the essential requirements concerning
safety. The directives that have been taken into consideration in the design are available on www.fast-fluid.com.
2.5
Safety symbols on the machine
CAUTION
Disconnect powersupply
before servicing
Maximum load weight.
See § 6.1
Read the manual
Central earthing point
Safety V. 1.0
8
SK300 CE
2.6
Safety symbols in the manual
WARNlNG
Can cause personal injury.
Note
Shows further information.
CAUTlON
Can cause damage to the machine.
2.7
Disposal of the machine
1. Sort the machine, the accessories and the packagingfor
environmentally friendly recycling.
2. Do not dispose of the machine into domestic waste. Dispose
of the machine according to local regulations.
Operator manual V. 1.0
9
SK300 CE
L
A
B
C
K
D
E
F
JG
G
I
H
3
Operator manual
3.1
Description
3.1.1 Overview of the machine
A: On/off switch
B: Net entry
C: Type plate. See also § 3.1.5.
D: Spindle
E: Door
F: Lid padding
G: Can handle retainer
H: Wheels
l: Adjustable feet
J: Can table
K: Can plate
L: Control panel. See also § 3.1.2.
Operator manual V. 1.0
10
SK300 CE
AB
C
D
3.1.2 Overview of the control panel
A: Emergency stop switch
B: Display
C: Stop/up key
D: Start keys
3.1.3 Factory default shake times
Note
The display shows the factory default shake times. Each start key has a default time. You can
combine the different shake times by selecting multiple start keys.
Start key (combination) Shake time [sec]
T1 30
T2 60
T3 150
3.1.4 Type plate: serial number
Table des matières
Autres manuels Idex Pistolet à peinture
