IDevices IGRILL MINI Manuel utilisateur

User Manual

Table of Contents

In the Box 3

Quick Start Instructions 3

Getting Started 4

iDevices Connected App 4

Battery Replacement 4

Powering On & Off 5

Connecting 5

Mounting 6

Probe Use 7

Probe Wrap Use 8

Using the iGrillmini 9

Smart LED 9

Proximity Sensor 9

Custom & Preset Alarms 10

Renaming Probes 11

Timer Tool 11

Globe Tool 12

Graph Tool 12

Problem Solving 13

Frequently Asked Questions 15

Disclaimer 15

Regulations 15

In the Box

Inside your iGrillmini box, you will nd:

• 1 iGrillmini

• 1 Coin Cell Battery (Installed)

• 1 Meat Probe

• 1 Colored Probe Indicator

• 1 Probe Wrap

• 1 Optional Magnetic Disc

• Quick Start Guide

Quick Start Instructions

• Download the iDevices Connected app from the App StoreSM and

launch it from your iPhone®(4S and later), iPad®(3rd generation and

later), iPad mini™ (all generations), or iPod touch®(5th generation

and later).

• Enable Bluetooth®on your smart device under ‘Settings’.

• Separate the iGrillmini from its base by rmly holding the base with

one hand and gently pulling the iGrillmini top upwards with the other

hand.

• On the underside of the iGrillmini, remove the battery door by

twisting it counter-clockwise. Remove the battery pull tab. Ensure

the battery is in place and replace the battery door.

• Clip the iGrillmini top back into its base.

• Plug the Meat Probe into the probe port of the iGrillmini.

• Press the power button located at the center of the faceplate for

two seconds. The display will light up, indicating the iGrillmini has

powered on.

• Open the iDevices Connected app to connect to your iGrillmini. Tap

on the iDevices logo in the gray toolbar at the top of the app. Select

your iGrillmini from the device manager.

• You are ready to use your iGrillmini!

Getting Started

iDevices Connected App

The iDevices Connected app provides all of the functionality and

customization you’ll need to get the most out of your iGrillmini. The iDevices

Connected app is compatible with the following devices:

• iPhone (4S and later)

• iPad (3rd generation and later)

• iPad mini (all generations)

• iPod touch (5th generation and later)

You must be running iOS 7+ on your smart device to use the iDevices

Connected app. Please visit the App StoreSM to download the free iDevices

Connected app.

Once you’ve downloaded the app, you’ll have access to links

for instructional videos, step-by-step instructions and FAQ’s for

troubleshooting.

Battery Replacement

To replace your iGrillmini battery, follow these steps:

• Separate the iGrillmini from its base by rmly holding the base with

one hand and gently pull the iGrillmini top upwards with the other

hand.

• On the underside of the iGrillmini, remove the battery door by

twisting it counter-clockwise

• Replace the battery with a CR2032 coin cell battery (available at

local drugstores in the specialty battery section).

• Ensure the battery is in place and replace the battery door.

Powering On & Off

To turn on the iGrillmini, follow these steps:

• Press the power button located at the center of the faceplate.

• The Smart LED will blink blue while waiting for pairing.

To turn off the iGrillmini, follow these steps:

• Press and hold down the power button located in the center of the

faceplate for three seconds.

• The Smart LED will illuminate solid white and will then turn off.

Auto Shut-Off:

• The iGrillmini will stay powered on for ve minutes before

automatically turning off if there is no probe installed and it is not

paired to a smart device.

• The iGrillmini will stay powered on for eight hours before

automatically turning off if not paired to a smart device and the

probe is installed.

• The iGrillmini will stay powered on until the battery is depleted if it is

paired with a smart device, even if there is no probe installed.

Connecting

To connect your iGrillmini to your iPhone, iPad or iPod touch, follow these

steps:

• Open Settings

• Tap Bluetooth

• Set Bluetooth to On

• While turned on, place your iGrillmini next to your smart device

and open the iDevices Connected app. Your smart device will

automatically recognize any available iDevices products and display

them in the device manager. You can view your device manager by

tapping the iDevices logo at the top of the app.

• Select your iGrillmini from the device manager. You will then be sent

a pairing request. Once you accept, your smart device will pair with

the iGrillmini and you are ready to congure your settings and start

cooking!

To connect an additional iGrillmini (or other iDevices product) to your

iPhone, iPad or iPod touch follow these steps:

• While turned on, place your iGrillmini (or other iDevices product) next

to your smart device and open the iDevices Connected app.

• Tap on the gray bar located at the top of the screen to expose the

device manager. Select the product you would like to pair with

from the device manager. Your smart device will display a pairing

request. Once accepted, your smart device will pair with the

additional product and you are ready to congure your settings and

start cooking!

Mounting

• The iGrillmini‘s base is magnetic for convenient positioning on a cool

portion of your grill, smoker or other magnetic surfaces.

• The iGrillmini can be taken out of its base, rotated 180° and set back

into its base for two different viewing angles.

• The iGrillmini comes with an optional magnetic disc with an adhesive

on one side. This allows the iGrillmini to magnetically mount on a

non-magnetic surface. The magnetic disc has a protective cover on

its face to protect it from being scratched.

To mount your magnetic disc, please follow the below steps:

• Clean the surface thoroughly where the magnetic disc will be

adhered to ensure proper bonding.

• Remove the protective lm covering the adhesive on the magnetic

disc.

• Adhere the magnetic disc to your desired surface.

• Let the magnetic disc bond to the surface for at least 6-12 hours

before mounting your iGrillmini to the disc.

• Place your iGrillmini on the magnetic disc.

The magnetic base is not designed to withstand high heat

and it must be placed on a cool surface. If the surface is too

hot to touch, it is too hot for the iGrillmini base!

Probe Use

• Meat Probe Acceptable Temperature Range: -22°F to 572°F (-30ºC

to 300ºC)

• Pro Meat Probe and Pro Ambient Temperature Probe Acceptable

Temperature Range (sold on iDevicesinc.com): -22ºF to 700ºF (-30ºC

to 371ºC)

• The Meat Probe should always be inserted into the center of the

item being cooked for an accurate temperature reading.

• When using a standard Meat Probe, be sure to route the probe wire

where it will not be exposed to ames or temperatures exceeding

572° (300°C).

• The Pro Ambient Probe should be clipped between two grates

inside the oven. Ensure that the tip of the probe does not touch the

grates.

• The probe wrap allows for convenient storage of your probe and

is magnetic so that it can be stored under your iGrillmini when not in

use.

The colored probe indicator is for visual identication of the

probe within the app and cosmetic purposes only. It is not

designed for heat safety.

The probe should be cleaned by hand with a dishcloth,

standard dishwashing soap and warm water. The probe is

not dishwasher safe. Take precaution not to get the probe’s

wiring wet.

Be sure to avoid water exposure to the probes’ wiring as

well as the area where the probes’ wiring meets the probe.

The probe is not waterproof and damage may result from

water exposure. The probe should never be submersed in

water.

Temperatures below -22°F or above 572°F (-30ºC or above

300ºC) will not display in the iDevices Connected app and

will cause the probe to disappear from connection.

Probe Wrap Use

To wrap your probe:

• Hold the probe wrap so that the clip segment is on the bottom left

and the iDevices logo is legible in the center of the probe wrap.

• Snap the probe into the probe wrap’s clip, ensuring that the probe’s

body follows the contour of the probe wrap and leaves a ½ inch gap

between the probe and the wire channel of the probe wrap. The tip

of the probe should be pointed downward.

• Wrap your probe’s wire clockwise around the probe wrap.

• When you reach the adapter end of the probe wire, it can be

inserted into the probe wrap’s wire channel to secure the wrapping.

Using the iGrillmini

Smart LED

The Smart LED allows the iGrillmini to display the connected probe

temperature reading through the use of color. Below is a list of all of the

light combinations you will see on the Smart LED and their associated

meanings:

Connection

• Solid White: Powering off or reset complete

• Solid Blue: Conrms pairing of new device

• Blinking Blue: Awaiting pairing or no alarm set

Peak Preset

• Solid Green: Initial temperature

• Solid Yellow: Target temperature is 15° F away

• Solid Orange: Target temperature is 5° F away

• Blinking Red: Target temperature reached

• Solid Red: Target temperature reached and alarm acknowledged

Range Preset

• Solid Green: Temperature inside range

• Blinking Red: Temperature outside range

Proximity Sensor

The use of Bluetooth®Smart allows the iGrillmini to sense when a paired

smart device moves in or out of range. The iGrillmini will automatically wake

and sleep at the below distances to conserve power:

• Sleep ~ 30 feet away

• Wake ~ 5 feet away

Custom & Preset Alarms

Manage iPhone, iPad or iPod touch alarms:

If you are having issues hearing the alarms from the iDevices Connected

app, try these steps.

• Open Settings on your smart device

• Tap “Notication Center”

• Choose the iDevices Connected app and make sure to enable

notications, including “Sounds” and “Alerts”.

Make sure the volume setting for your phone is properly set.

If your sounds are off or set at a low setting, you may not

hear the alarm properly.

Manage iDevices Connected app alarms:

Within the app, tap “Set Preset” to the right of a connected probe’s

running temperature. This will bring you to your “Choose Preset” options.

Preset Alarms:

The iDevices Connected app offers preset alarms for many types of meats

and cooking temperatures. Tapping a preset alarm will set it. You can also

create your own custom preset alarm for any desired temperature. There

are two different types of presets:

• Peak: Alarm will sound when probe temperature reaches set peak

temperature.

• Range: Alarm will sound when probe temperature is above the high

temperature or below the low temperature.

Creating a custom preset alarm:

• Tap “Set Preset”

• Tap “Create New”

Autres manuels pour IGRILL MINI

Table des matières

Manuels Gril populaires d'autres marques

Orbegozo

Orbegozo GR 2300 Manuel utilisateur

bora

bora PT11 Manuel utilisateur

Klarstein

Klarstein 10031664 Manuel utilisateur

Garland

Garland MWE3W Manuel utilisateur

Char-Broil

Char-Broil 463722714 Manuel utilisateur

Nexgrill

Nexgrill 720-0830HK Manuel utilisateur

Kenmore

Kenmore 415.16123800 Manuel utilisateur

Camp Chef

Camp Chef PG24CLAU Manuel utilisateur

Tucker Barbecues

Tucker Barbecues GTR Series Instructions de montage

Monogram

Monogram ZGG540NCP1SS Manuel utilisateur

Equipex

Equipex Sodir Savoy Manuel utilisateur

Gaggenau

Gaggenau VR 414 610 Manuel utilisateur

Miele

Miele KM 408-1 Manuel utilisateur

George Foreman

George Foreman GGR50B Manuel utilisateur

AOG

AOG T series Manuel utilisateur

Gorenje

Gorenje TG2000CB Mode d’emploi

Weber

Weber Genesis Silver-B Permamount NG 051701 Manuel utilisateur

Glen

Glen SA 3037 Manuel utilisateur

iDevices IGRILL MINI Manuel utilisateur

Manuels Gril populaires d'autres marques