IDEAL LOGIC+ Combi 24 Manuel utilisateur

USERS GUIDE

RF Electronic Programmable Room Thermostat, 7 day

LOGIC+ Combi, LOGIC Combi & LOGIC Combi E

24, 30, 35

When replacing any part on this appliance, use only spare parts that you can be

assured conform to the safety and performance specification that we require.

Do not use reconditioned or copy parts that have not been clearly authorised by Ideal.

204796-6.indd 1 15/12/2011 14:34:22

back

The national regulations and respective safety instructions are to be observed.

Interferences and changes to the device will lead to cancellation of the warranty.

204796-6.indd 2 15/12/2011 14:34:23

back

The Ideal Logic Combi RF Programmable Room

Thermostat features the following:

• Summer/WinterTime(GMT/BST)automaticallyupdated

• 7daytimedcontrolofcentralheatingbyOpentherm(saves

energy&reducescostsbyoperatingatlowertemperature)

• RoomTemperatureControl

• RadioFrequencyCommunication(nowiring)

• SimpleUserInterface

• EnglishLanguageboilerfaultmessagesandsuggested

correctiveactions

• Timedpre-heat(tosaveenergyandreducecosts)

• +HoursMode

• HolidayMode

CONTENTS

Controls ..................................................................4

Setting the Time and Date ......................................6

Setting the Program.............................................7,8

Setting the Room Temperature...............................9

Setting to Run in Automatic Mode ........................10

Setting to be Continuously On..............................10

Setting to be Continuously Off..............................10

Setting + Hours.....................................................11

Advanced Features ........................................ 12-17

Battery Replacement............................................18

LOGIC COMBI, LOGIC COMBI E & LOGIC + COMBI

RF Electronic Programmable Room Thermostat, 7 day Instructions

Signal

204796-6.indd 3 15/12/2011 14:34:23

back

RF ELECTRONIC PROGRAMMABLE ROOM THERMOSTAT, 7 DAY

Note.

Ifabatterysymbolisblinking,thedisplayisblinkingorthedisplayisblankthenreplacebatteries.

RUN

HOURS

7654321

SUNSATFRITHURWEDTUESMON

0 3 6 9 12 15 18 21 24h

Display

Indication of

programmed

day

Indication of

programmed

on time

+/- keys

Control Knob

for program selection

Next Day

Key

Copy Key

OK KeyReset Button

204796-6.indd 4 15/12/2011 14:34:24

back

Signal

RECEIVER UNIT (BOILER MOUNTED)

1. During normal operation light (A) is on for Hot water Operation.

2. During normal operation light (B) is on for Central Heating Operation.

3. If the Reset Button is pressed on the room thermostat the signal lights on the receiver unit will light. If less than

4 lights are on either the room thermostat is too far from the boiler or the batteries in the room thermostat need

replacing.

At the same time “M-050 S-050” is shown on the room thermostat. The number is another indicator of signal

strength - the lower the number the better.

204796-6.indd 5 15/12/2011 14:34:24

back

2. Press the and keys to change the Hours to the current time

and to enter press the

key

3. Press the and keys to change the Minutes to the current

time and to enter press the

key

4. Press the and keys to change the Year to the current year

and to enter press the

key

5. Press the and keys to change the Month to the current

month and to enter press the

key (note, January = 1)

6. Press the and keys to change the Day of the Month to the

current day of the month and to enter press the

Key

SETTING THE TIME AND DATE

1. Turn the Control Knob to the “TIME/DATE” position

7. Turn the Control Knob to the required operating condition: “RUN”, “Cont On” or

“Cont Off”

Note.Summer/Wintertimeautomaticallyupdated.

204796-6.indd 6 15/12/2011 14:34:25

back

2. Press the and keys to change the Hours gure for Monday’s

1st On Time and to enter press the

key

3. Press the and keys to change the Minutes gure for

Monday’s 1st On Time and to enter press the

key

4. Press the and keys to change the Hours gure for Monday’s

1st Off Time and to enter press the

key

5. Press the and keys to change the Minutes gure for

Monday’s 1st Off Time and to enter press the

key

6. If you do not wish to set any further times for Monday press the Next

Day Key (and move to point 10). Otherwise, press the and

keys to change the Hours gure for Monday’s 2nd On Time and to

enter press the

key

SETTING THE PROGRAM

1. Turn the Control Knob to the “PROGRAM” position

cont...........

204796-6.indd 7 15/12/2011 14:34:25

back

7. Press the and keys to change the Minutes gure for

Monday’s 2nd On Time and to enter press the

key

8. Press the and keys to change the Hours gure for

Monday’s 2nd Off Time and to enter press the

key

9. Press the and keys to change the Minutes gure for

Monday’s 2nd Off Time and to enter press the

key

Note. If you would like to set a 3rd On period then continue programming in the

same manner. Otherwise press the Next Day key.

10. If you would like to have the same On and Off times for Tuesday as for Monday then

press the Copy key and then the OK key. To move to Wednesday press the Next

Day key, continuing in the same manner. If you would like to have different times for

Tuesday, then enter them in the same manner as for Monday. When programming for

Sunday is complete turn the control knob to the RUN position to activate the program.

11. Turn the Control Knob to the required operating condition:

“RUN”, “Cont On” or “Cont Off”

204796-6.indd 8 15/12/2011 14:34:25

back

SETTING THE ROOM TEMPERATURE

1. Turn the Control Knob to the “SET TEMPERATURE” position

2. Press the and keys to change the Temperature and to enter

press the

key

3. Turn the Control Knob back to the required mode of operation:

“RUN”, “CONT ON” or “CONT OFF”

4. Turn the Control Knob to the required operating condition: RUN, CONT ON or

CONT OFF

204796-6.indd 9 15/12/2011 14:34:25

back

SETTING THE RF PROGRAMMABLE ROOM THERMOSTAT TO RUN IN AUTOMATIC MODE

(using the programmed on and off times)

1. Turn the Control Knob to the ‘RUN’ position

SETTING THE RF PROGRAMMABLE ROOM THERMOSTAT TO BE CONTINUOUSLY ON

1. Turn the Control Knob to the ‘CONT ON’ position

SETTING THE RF PROGRAMMABLE ROOM THERMOSTAT TO BE CONTINUOUSLY OFF

1. Turn the Control Knob to the ‘CONT OFF’ position

204796-6.indd 10 15/12/2011 14:34:25

back

Autres manuels pour LOGIC+ Combi 24

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels IDEAL Thermostat

IDEAL

IDEAL Touch Logic Combi C Manuel utilisateur

IDEAL

IDEAL Touch Logic Combi Manuel utilisateur

IDEAL

IDEAL RF Electronic Manuel utilisateur

IDEAL

IDEAL Touch Manuel utilisateur

IDEAL

IDEAL Vogue S15 Manuel utilisateur

IDEAL

IDEAL LOGIC COMBI Manuel utilisateur

IDEAL

IDEAL Touch Manuel utilisateur

IDEAL

IDEAL Touch Manuel utilisateur

IDEAL

IDEAL Halo Combi RF Manuel utilisateur

IDEAL

IDEAL Halo Combi RF Manuel utilisateur

IDEAL

IDEAL Touch Manuel utilisateur

IDEAL

IDEAL Vogue Combi c26 Manuel utilisateur

IDEAL

IDEAL Touch Manuel utilisateur

IDEAL

IDEAL RF Electronic Manuel utilisateur

IDEAL

IDEAL Halo Combi Wi-Fi Manuel utilisateur

Manuels Thermostat populaires d'autres marques

EWELLY

EWELLY EW-181 Manuel utilisateur

Prolon

Prolon T1100 Instructions d'installation

Computherm

Computherm Q20 Manuel utilisateur

Heatmiser

Heatmiser neoStat Manuel utilisateur

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur

Saswell

Saswell SAS920XWHB-7-S-RF Mode d’emploi

Aircalo

Aircalo TFP1-ET85P2 Manuel utilisateur

Honeywell

Honeywell CM721 Manuel utilisateur

Carrier

Carrier DEBONAIR 33CS Manuel utilisateur

Lennox

Lennox iHarmony Zone Thermostat Instructions de montage

Gemtech

Gemtech GT7000 Mode d’emploi

Rollei

Rollei Smartes 45000 Manuel utilisateur

Sinope

Sinope TH1300RF Manuel utilisateur

Honeywell

Honeywell RLV4305 Manuel utilisateur

Honeywell

Honeywell Prestige 2.0 THX9421 Manuel utilisateur

NuTone

NuTone NTBZ48 Instructions d'utilisation d'origine

Stelpro

Stelpro MAESTRO ASMT402AD Manuel utilisateur