I-2533 CAN to Fiber Multi-Mode Bridge - QuickStart (Nov/2016)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
5
3. Utility Tool
When users want to use user-defined baud rate or set the message filter, I-2533 utility
tool may be needed. It can be free downloaded from the following web site or get it in
the product CD (path: CAN/Converter/I-2533 /Software):
http://www.icpdas-usa.com/i_2533.html
After getting the utility tool, please follow the following steps to set the baud rate and
message filter.
Step0: Power off the I-2533. Set the rotary switch to “F”, and connect the PC available
COM port with the COM port of the I-2533. Users can find the communication cable in
the product box. When connecting to the COM port of I-2533, the TxD pin of the cable
is connected to the TXD pin of the COM port, RXD pin of the cable is connected to the
RXD pin of the COM port, and GND pin of the cable is connected to the GND pin of
the COM port. Then, power on the I-2533.
Step1: Execute the I2533_Utility.exe, the dialog of the I-2533 Utility will be poped up.
Select the PC COM port which is connected with the COM port of the I-2533. Then,
click “Connect” button.
