iCON Pro Audio Utrack Pro Manuel utilisateur
User manual
6-In / 6-Out with +48V Phantom Power Recording USB Interface
Important Safety Instructions
1. Read this manual thoroughly before using this unit.
2. Keep this manual for future reference.
3. Take notice of and comply with all warnings included in the user's manual or indicated on the
appliance.
4. Follow all instructions included in this manual.
5. Do not expose this unit to rain or moisture. Avoid having water or other liquids spilled on this
unit.
6. When cleaning the cabinet or other parts of this appliance, use only a dry or slightly damp soft
cloth.
7. Do not block any ventilation openings or interfere with the proper ventilation of this unit. Install
in accordance with the manufacturer's instructions.
8. Do not use or store near any heat sources such as radiators, heat registers, stoves, or other heat-
producing appliances.
9. Do not interfere with the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding-type plug has two blades and a third
grounding prong. These are designated for your safety. If the provided plug does not fit into your
outlet, consult an electrician.
10. Protect the power cord from being walked on or otherwise damaged by items placed on or
against them. Particular attention should be given to the plugs, receptacles, and the point where
the cord exits the appliance.
11. To avoid the risk of electrical shock, do not touch any exposed wiring while the unit is in
operation.
12. Only use attachments/accessories specified by the manufacturer.
13. Unplug this unit and all connected electrical equipment during lightning storms or when left
unused a long period of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the appliance has
been damaged in any way or fails to operate normally.
WARNING: To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture
Introduction...............................................................................................4
What’s in the package? ............................................................................4
Register your ICON ProAudio product to your personal account ...........5
Features ...................................................................................................6
Front Panel ..............................................................................................7
Rear Panel................................................................................................8
Mac driver installation...............................................................................9
Mixer control panel ................................................................................. 11
Windows driver installation.....................................................................12
ProDrive Ⅲ................................................... 15
Mixer control panel .................................................................................16
Settings (Sample rate and latency settings)...........................................18
ProDrive Ⅲhosting rack.........................................................................22
Hardware Connections...........................................................................23
Specications .........................................................................................24
Services..................................................................................................25
Contents
4
Introduction
What’s in the package?
●UtrackPro USB Recording Interface
●Quick Start Guide x 1
●USB 2.0 cable x 1
Thank you for purchasing the ICON ProAudio UtrackPro digital audio Interface. We
sincerely trust this product will provide years of satisfactory service, but if anything is
not to your complete satisfaction, we will endeavor to make things right.
In these pages, you'll nd a detailed description of the features of the UtrackPro
digital audio interface, as well as a guided tour through its front and rear panels,
step-by-step instructions for their setup and use, and full specications.
Please register the product on our website at the below link
www. iconproaudio.com/registration:
Please follow the step by step procedures. Start by inputing the device’s serial
number as well as your personal information, etc. By registering your product online,
you will be entitled to service and after-sales support at our Help Center by visiting
our website at www.iconproaudio.com. Also, all the registered products under your
account will be listed on your personal product page where you will nd updated
information such as rmware/driver upgrades, software bundles, user manual
downloads, etc. for your device.
As with most electronic devices, we strongly recommend you retain the original
packaging. In the unlikely event the product must be returned for servicing, the
original packaging (or reasonable equivalent) is required.
With proper care and adequate air circulation, your UtrackPro digital audio interface
will operate without any trouble for many years. We recommend that you record your
serial number in the space provided below for future reference.
5
Register your ICON ProAudio product to your
personal account
1. Check serial number of your device
Please go to http:// iconproaudio.com/registration or scan the QR code
below.
Input your device’s serial number and the other information on the screen. Click
“Submit”.
A message will pop up showing your device information such as model name
and its serial number - Click “Register this device to my account” or if you see
any other message, please contact our after-sales service team
2. Log in to your personal account page for existing user or
sign up for new user
Existing user: Please log into your personal user page by inputing your
user name and password.
New user: Please click “Sign Up” and ll in all the information.
3. Download all useful materials
All your registered devices under your account will show on the page. Each
product will be listed along with all its available les such as drivers, rmware,
user manual in different languages and bundled software etc. for download.
Please make sure you have download the necessary les such as driver before
you begin device installation.
6
Features
●24-Bit 192KHz 6-In/6-Out USB Recording Interface
●High dynamic range:
DAC: Dynamic Range: 114dB
ADC: Dynamic Range: 114dB
●4x4 analog I/O full duplex recording and playback
●Dual Mic/Instrument preamps with individual gain control and phantom power switch
●2 analog inputs on 1/4” TRS jacks
●4 analog outputs on 1/4” TRS jacks
●S/PDIF I/O on RCA coaxial connectors
●1 x 1 – 16 channel MIDI I/O
●Master volume control on the front panel
●Direct monitor knob control on the top panel
●2 headphone output with assignable source and individual volume control
●Flexible channel routing via the software control panel
●ICON's innovative ProDrive Ⅲ™ plug-ins hosting rack is provided
●Kilohearts plug-ins are provided
●USB2.0 High Speed equipped and USB bus-powered
●Supports DirectSound, WDM and ASIO2.0
●Compatible with Mac OS (Intel-Mac) 10.11 and later, iOS 9 or above and Windows 7,
8 & 10 (32-bit/64-bit)
●Full duplex, simultaneous record/playback
●+12VDC power supply connector is equipped for external power supply when using
with iOS
●Rugged aluminum construction
The ICON UtrackPro USB recording interface provides an audio input and output
module with USB connectivity. Main features include:
7
Front Panel
31
24 8 7
56
1. “Mic/Inst” inputs 1/2
Unbalanced instrument and mic level inputs. These hybrid connectors will accept
a standard 3-pin XLR plug or a 1/4” TS connector.
2. 48V phantom power switch
Press to supply +48V phantom power to the associated XLR input. This phantom
power circuit is suitable for most condenser microphones.
3. Input gain level controls 1/2
These potentiometers control the input level of their associated analog Mic/Inst/
Line input.
4. Direct monitoring control knob
This potentiometer controls the audio signal ow of the PC output and the actual
analog inputs.
Comp (Anticlockwise) Only PC audio signal will be monitored
Direct Out (Clockwise) Only analog inputs (Mic/Inst 1&2) will be
monitored
Mix (Centre) Both PC & analog inputs audio signal will be
monitored
5. HP Monitor 1 output
This output jack accepts a standard 1/4" stereo TRS headphone connector.
6. HP Monitor 1 volume control
This potentiometer controls the output level of HP Monitor 1.
7. HP Monitor 2 output
This output jack accepts a standard 1/4" stereo TRS headphone connector.
8. HP Monitor 2 volume control
This potentiometer controls the output level of HP Monitor 2.
8
Rear Panel
3
2
3146
5
1. USB 2.0 Connector
Connect it with the provided USB cable to your Mac/PC’s USB connector.
Your Mac/PC must have a USB2.0 connector in order to run the full speed of
UtrackPro .
2. Line inputs 3/4
These are unbalanced analog inputs on standard 1/4″ TS connectors at
–10dB line level.
3. Line outputs 1-4
These are unbalanced analog outputs on standard 1/4″ TS connectors at
+6dBU line level.
4. S/PDIF coaxial I/O connectors
S/PDIF digital input and output on coaxial RCA connectors. The digital input
is selected via the UtrackPro 's software control panel, while the digital output
will be sent to the coaxial.
5. MIDI I/O connectors
MIDI input and output on standard 5-pin DIN connectors
6. 12V/1A power adaptor
Connect the provided power adaptor here.
Note: UtrackPro is not able to work without the provided power adaptor
connected. The USB bus power is not able to provide sufcient power supply
for UtrackPro .
9
Mac driver installation
UtrackPro is a class compliant device. Thus there is no driver installation
needed for Mac. Also, it fully supports iOS devices by connecting the unit to a
camera kit.
Please follow the step-by-step procedures below to install your UtrackPro USB
recording interface.
1. Turn on your Mac
(Note: Do not connect the UtrackPro digital audio interface to your Mac yet.)
2. Class compliant device
UtrackPro is class compliant on macOS, so no driver installation is
needed.
3. Copy the software control panel shortcut logo to your
desktop
Open the previous “Mac” folder. Copy the “ProDrive Ⅲ” software panel shortcut
logo and paste it to your desktop.
4. Launch the software control
panel
Click the UtrackPro ’s software
control panel shortcut logo you have
just copied to your desktop to launch
the software control panel.
Diagram 1
Mac
Ⅲ
Ⅲ
Ⅲ
Ⅲ
UtrackPro
Ⅲ
Ⅲ
Diagram 2
10
5. Connect your UtrackPro
digital audio interface
Now connect the UtrackPro digital
audio interface to your Mac's USB
port.
Note: UtrackPro audio interface only
support USB2.0. Your Mac must have
a USB2.0 port.
Diagram 4
UtrackPro (Core Audio) UtrackPro: Output
UtrackPro (Core Audio)
UtrackPro (Bit Accurate)
6. Audio MIDI setup
Open the “Audio MIDI setup”
window and conrm that the
UtrackPro device has been
setup properly as shown in
diagram 4.
Diagram 3
UtrackPro VST
13
13
14 15
USB
Esc
F1 F2 F3 F4
F5
F6
F7 F8 F9 F10 F11 F12
Prtsc
sysrq
pause
Break
Lns
Del
Home
Pgup
PgDN
End
$
~
`
！
1
··
23456778 90
）
）
*—
-
+
=
#￥%
*
##
QWERTYUIOP{}|
ASDFGHJKL:
;
ZXCVBNM<>?
Tab
CapsLook
Shift
Ctrl Alt AltGr Ctrl
Backspace
[
]
|
Enter
Shift
intel
USB
Mac
Table des matières
Manuels Interface USB populaires d'autres marques
PASCO
PASCO SCIENCEWORKSHOP 750 Manuel utilisateur
Phonic
Phonic FIREFLY 302 USB Manuel utilisateur
OHAUS
OHAUS Scout STX Series Manuel utilisateur
Denon
Denon DN-HC4500 - DJ Mixer USB Controller Manuel utilisateur
Lutron Electronics
Lutron Electronics Stanza SZ-CI-USB-CPN5138 Manuel utilisateur
Paradox
Paradox PMC5-TI00 Manuel utilisateur
Thorsis Technologies
Thorsis Technologies isDNet USB Manuel utilisateur
Thorsis Technologies
Thorsis Technologies isHRT USB Manuel utilisateur
microHAM
microHAM DigiKeyer Manuel utilisateur
Apogee
Apogee Jam X Manuel utilisateur
RigExpert
RigExpert TI-3000 Manuel utilisateur
microHAM
microHAM USB Interface II Manuel utilisateur