ICM Controls SC2201 Instructions générales
Manual Changeover
Non-Programmable
Hardwired
SC 2201
Non-Programmable Electronic Thermostat
Installation, Operation & Application Guide
For more information on our complete range of American-made
products – plus wiring diagrams, troubleshooting tips and more,
visit us at www.icmcontrols.com
• For use with Heat Pumps
• Up to 2-Stage Heat, 2-Stage Cool
• 30-Minute Power Loss Memory Retention
• For use with 24 VAC Systems
Table of Contents
CAUTION!
:
Thisthermostatshouldbeinstalledbytrainedtechniciansonly.Adheretoalllocaland
nationalcodes.Disconnectallpowertothesystembeforeinstalling,removing,orcleaning.
PartsDiagram........................................................ 1
Specications........................................................ 2
Features/Benets.................................................. 2
PackageContents/ToolsRequired........................ 2
ImportantSafetyInformation................................. 3
GeneralDescription............................................... 2
ToRemoveExistingThermostat............................ 4
ReplacingWiringLabels........................................ 4
ToInstallThermostat............................................. 5
TestingtheThermostat.......................................... 6
LEDIndicators....................................................... 8
Operation...............................................................9
WiringDiagrams.................................................. 11
CarrierSplitStreamCondensers........................................... 11
Coleman3000Series............................................................12
ComfortmakerCYCSeries....................................................13
Heil-Quaker867.814SeriesandPH50Series...................... 14
PayneReliantandEnduraModel..........................................15
Rheem/Ruud: -PGB,-PFA,-PCB,
-PLA,and-PKASeries.................................16
Goodman,Janitrol,Trane/AmericanStandard......................17
York-E1CS,-E1FB,E1FH.....................................................18
LennoxCB19 ......................................................................19
LennoxHP19andHP20........................................................20
LennoxHP21withCB21PCB...............................................21
LennoxHP22withCB19PCB...............................................22
FHP1Stage..........................................................................23
FHP2Stage..........................................................................24
Troubleshooting................................................... 25
1
Parts Diagram
2
Specifications
Input:
• Voltage:24VAC(18-30VAC)
Output:
• Maximum:1ampmaximumloadperterminal
(4amptotalmaximumloadforallterminals)
Temperature Ranges:
• Temperature control range: 45°Fto90°F(7°Cto32°C)Accuracy:±1°F(±0.5°C)
• Differential range: 1°Fto3°F(0.5°Cto1.5°C)
System configurations:Multi-stageheatpump(two-stageheat,two-stagecool)
Terminations:R,C,E,Y1,Y2,O,B,G,L,W2
Second stage activation in heat mode:2°belowrststage(notadjustable)
Second stage activation in cool mode:2°aboverststage(notadjustable)
SET
ROOM
DIFF
Temperature
differentialsetting
Roomtemperature
Roomtemperature
setpoint
Package Contents/Tools Required
Package includes: SimpleComfort®2201non-programmablethermostatonbase,thermostatcover,wiringlabels,
screwsandwallanchors,Installation,OperationandApplicationGuide.
Tools required for installation:Drillwith3/16”bit,hammer,screwdriver.
Features/Benefits
• Multi-stageheating/coolingcontrol
• Multi-coloredLEDindicatorsforsystemstatus
• Zonesystemcompatibleasamasterthermostat
• Fahrenheitdisplayandoperationcanbechanged
toCelsius
• Adjustabletemperaturedifferential: 1°Fto3°F
(0.5°Cto1.5°C)
• Automaticheatingsystemshutdowniftemperature
exceeds90°F(32°C)
• 30-minutepowerinterruptionmemoryretention
• Resetbuttonfordifferentialtemperatureadjustment
• Independentsetpointsforheatandcool
3
Important Safety Information
General Description
TheSimpleComfort®2201isintendedtooperateandiscompatiblewith24VACresidentialheatpumpswithupto
2-stageheat/2-stagecool.Itwilloperatewithmulti-stageheatpumpsystemsthataremanualchangeoverandhave
auxiliaryoremergencyheating.Therearenooptionalitemsrequiredforstandardinstallations.Thisthermostatisalso
compatibleasamasterthermostatinzonedsystemapplications.
TheSimpleComfort®2201willautomaticallycontroltheheatand/orairconditioningsystem.Whenusedproperly,this
thermostatcanreduceheatingandcoolingcoststhroughouttheyear.
• Alwaysturnoffpoweratthemainpowersourcebyunscrewingfuseorswitchingcircuitbreakertotheoffposition
beforeinstalling,removing,cleaning,orservicingthisthermostat
• Readalloftheinformationinthismanualbeforeinstallingthisthermostat
• Thisthermostatshouldbeinstalledonlybyaprofessionalcontractor
• Thisisa24VAClow-voltagethermostat;donotinstallonvoltageshigherthan30VAC
• Allwiringmustconformtolocalandnationalbuildingandelectricalcodesandordinances
• Donotswitchsystemtocooliftheoutdoortemperatureisbelow50°F(10°C);thiscandamagetheairconditioning
systemandmaycausepersonalinjury
• Thethermostatwillnotcontrolyourheating/airconditioningsystemwithoutpower;itrequiresacontinuous24VAC
circuitforpropersystemcontrol
• Usethisthermostatonlyasdescribedinthismanual
• Whilecleaning,donotgetsoapdirectlyonthermostatswitchesorLCDreadout;onlyusea
dampclothwithamildsoaptowipeoutsideofthermostatcover
4
ELECTRICAL SHOCK HAZARD – Turn off power at the main service panel by removing the fuse
or switching the appropriate circuit breaker to the Off position before removing the existing
thermostat.
1. Turnoffpowertotheheatingandcoolingsystembyremovingthefuseorswitchingofftheappropriatecircuit
breaker.
2. Removecoverofoldthermostat.Thisshouldexposethewires.
3. Label the existing wires with the enclosed wire labels before removing wires.Seetablebelowforoldand
newlabelidentication.
4. Afterlabelingwires,removewiresfromwireterminals.
5. Removeexistingthermostatbasefromwall.
6. Refertothefollowingsectionforinstructionsonhowtoinstallthisthermostat.
Replacetheoldlabelswiththeenclosednewlabels:
Old New Type
R,V-VRorVR-R R 24VAC,return
Y,Y1orM Y1 Stage1cooling/heatingcircuit
OorR O Reversingvalve(coolingmode)
B B Reversingvalve(heatmode)
GorF G Fancontactorcircuit
Y2 Y2 2ndstagecoolingcircuit
W1,W2orW-U W2 2ndstageheatingcircuit
LorX L SystemmonitorLED
E E Emergencyheatingcircuit
C,XorB C 24VAC,transformercommonside
Replacing Wiring Labels
To Remove Existing Thermostat
5
ELECTRICAL SHOCK HAZARD – Turn off power at the main service panel by removing the fuse
or switching the appropriate circuit breaker to the Off position before removing the existing
thermostat.
IMPORTANT: Thermostatinstallationmustconformtolocalandnationalbuildingandelectricalcodesand
ordinances.
IMPORTANT: Thisthermostatiscompatiblewith100%lockoutsystems.Toresetthesystem,turnthermostat
toOffpositionforatleast60seconds.
Note:
Mountthethermostataboutvefeetabovetheoor.Donotmountthethermostatonanoutsidewall,
indirectsunlight,behindadoor,orinanareaaffectedbyaventorduct.
1. Turnoffpowertotheheatingandcoolingsystembyremovingthefuseorswitchingofftheappropriatecircuit
breaker.
2. PutMode switchinOffposition.
3. PutFan switchinAutoposition.
4. Toremovecover,insertandtwistacoinorscrewdriver
intheslotsonthesidesofthethermostat.
5. Putthermostatbaseagainstthewallwhereyouplantomountit(Besurewireswillfeedthroughthewireopening
inthebaseofthethermostat).
6. Marktheplacementofthemountingholes.
7. Setthermostatbaseandcoverawayfromworkingarea.
8. Usinga3/16”drillbit,drillholesintheplacesyouhavemarkedformounting.
9. Useahammertotapsuppliedanchorsinmountingholes.
10. Alignthermostatbasewithmountingholesandfeedthecontrolwiresthroughwireopening.
11. Usesuppliedscrewstomountthermostatbasetowall.
Cool Off Heat Emer Auto On
Mode Fan
To Install Thermostat
6
12. Insertstripped,labeledwiresinmatchingwireterminals.SeeWiringDiagramssectionofthismanual(Pages11-
24).
CAUTION!
:
Besureexposedportionofwiresdoesnottouchotherwires.
13. Tightenscrewsonterminalblock.Gentlytugwiretobesureofproperconnection.Doublecheckthateachwireis
connectedtotheproperterminal.
14. Sealholeforwireswithnon-ammableputtyorinsulation.
15. Replacecoveronthermostatbysnappingitinplace.
16. Turnonpowertothesystematthemainservicepanel.
17. Testthermostatoperationasdescribedinthefollowingsection.
CAUTION!
:
Donotswitchsystemtocooliftheoutdoortemperatureisbelow50°F(10°C).Thiscandamage
theairconditioningsystemandmaycausepersonalinjury.
1. PuttheMode switchtoCoolposition.
2. Pressthe buttonuntilthetemperaturesettingisatleast3degreesbelowtheroom
temperature.Theairconditioningsystemandfanshouldturnonwithinafewseconds.
3. PuttheMode switchintheOffposition.Theairconditioningsystemshouldturnoff.
Thefanmayhaveadelay.
Note:
PressingtheResetbuttonwillbypassthe5-minuteanti-shortcycle
compressorprotection.
Cool Off Heat Emer
Cool Off Heat Emer
Mode
Mode
Testing the Thermostat
7
Note:
WhileinCoolorHeatmode,oncethethermostatturnsthesystemoff,abuilt-indelaykeepsthe
compressorfromturningonforabout5minutes.Thisprotectsthecompressor.
4. PuttheMode switchtotheHeatposition.
5. Pressthe buttonuntilthetemperaturesettingisatleast3degreesaboveroom
temperature.Theheatingsystemshouldturnon.
Note:
Thecompressormaynotturnonagainfor5minutes.
6. PuttheMode switchtotheOffposition.Theheatingsystemshouldturnoff.Onceagain
thefanmayhaveadelay.
7. PuttheFan switchtotheOnposition.Theblowerfanshouldturnon.
8. PuttheFan switchtotheAutoposition.Theblowerfanshouldturnoff.
Ifallfunctionsoperateproperly,thethermostatisinstalledcorrectly.
If the thermostat does not operate properly:
• Checkallwiringconnections
• SeeTroubleshooting(Page25)
Cool Off Heat Emer
Auto On
Auto On
Cool Off Heat Emer
Mode
Mode
Fan
Fan
8
TherearethreeLEDindicatorslocatedonthefrontofthethermostat.Theyaredesignedtoinformyouofthefollowing:
AUX (GREEN): Thisturnsonwhentheauxiliary(back-up)heatingisinoperation.Thisisthesecond(non-economy)
stageofheat.Itturnson2degreesbelowrststageandisnotadjustable.
CHECK (RED): Whenthisturnson,amalfunctionhasoccurredsomewhereintheheatpumpsystem.Pleasecontact
aqualiedservicetechnicianassoonaspossibletocheckyoursystem.
EMER (RED):This light turns on whenever the emergency heat is manually selected (system switch is in
the EMER position). While in the emergency heat mode, the heat pump compressor is off,
and the emergency heat (same as the auxiliary heat) maintains the setpoint temperature.
Cool Off Heat Emer OnAuto
Aux Check Emer
EMER (RED)
CHECK (RED)
AUX (GREEN)
LED Indicators
Autres manuels pour SC2201
2
Table des matières
Autres manuels ICM Controls Thermostat
ICM Controls
ICM Controls SC900V Instructions générales
ICM Controls
ICM Controls SimpleComfort PRO SC5812 Manuel utilisateur
ICM Controls
ICM Controls SC 3801 Manuel utilisateur
ICM Controls
ICM Controls SC 2311 Instructions générales
ICM Controls
ICM Controls SC 1800 Instructions générales
ICM Controls
ICM Controls SC 5011 Instructions générales
ICM Controls
ICM Controls MP2010L Instructions générales
ICM Controls
ICM Controls Single Comfort SC2010L Manuel utilisateur
ICM Controls
ICM Controls SC 2001 Instructions générales
ICM Controls
ICM Controls SC2010 N Instructions générales
ICM Controls
ICM Controls SC 2300 Instructions générales
ICM Controls
ICM Controls SC 3006 Instructions générales
ICM Controls
ICM Controls SC 2811 Instructions générales
ICM Controls
ICM Controls SC1600L/VL Manuel utilisateur
ICM Controls
ICM Controls SC3211L Instructions générales
ICM Controls
ICM Controls SC4812 Manuel utilisateur
ICM Controls
ICM Controls I3 1010HR Instructions générales
ICM Controls
ICM Controls SC 5811 Instructions générales
ICM Controls
ICM Controls SC3000L Instructions générales
ICM Controls
ICM Controls FS1500L Instructions générales
Manuels Thermostat populaires d'autres marques
EWELLY
EWELLY EW-181 Manuel utilisateur
Prolon
Prolon T1100 Instructions d'installation
Computherm
Computherm Q20 Manuel utilisateur
Heatmiser
Heatmiser neoStat Manuel utilisateur
Aube Technologies
Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur
Mars
Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur
