Icetro WU-0100A Manuel utilisateur

Undercounter Ice Machines

Technician’s Handbook

Revision Date: 1/24/22

Safety Notices

Read these precautions to prevent personal injury:

• Read this manual thoroughly before operating,

installing or performing maintenance on the

equipment. Failure to follow instructions in this manual

can cause property damage, injury or death.

• Routine adjustments and maintenance procedures

outlined in this manual are not covered by the

warranty.

• Proper installation, care and maintenance are essential

for maximum performance and trouble-free operation

of your equipment.

• Visit our website www.icetroamerica.com for manual

updates.

• This equipment contains high voltage electricity and

refrigerant charge. Installation and repairs are to be

performed by properly trained technicians aware of

the dangers of dealing with high voltage electricity and

refrigerant under pressure. The technician

must also be certified in proper refrigerant handling

and servicing procedures. All lockout and tag out

procedures must be followed when working on this

equipment.

• This equipment is intended for indoor use only. Do not

install or operate this equipment in outdoor areas.

• As you work on this equipment, be sure to pay close

attention to the safety notices in this handbook.

Disregarding the notices may lead to serious injury

and/or damage to the equipment.

Warning

Follow these electrical requirements during installation

of this equipment.

• All field wiring must conform to all applicable

codes of the authority having jurisdiction. It is

the responsibility of the end user to provide the

disconnect means to satisfy local codes. Refer to

rating plate for proper voltage.

• This appliance must be grounded.

• This equipment must be positioned so that the plug

is accessible unless other means for disconnection

from the power supply (e.g., circuit breaker or

disconnect switch) is provided.

• Check all wiring connections, including factory

terminals, before operation. Connections can

become loose during shipment and installation.

• For a cord-connected appliance, the following must

be included:

• Do not unplug by pulling on cord. To unplug,

grasp the plug, not the cord.

• Unplug from outlet when not in use and before

servicing or cleaning.

• Do not operate any appliance with a damaged

cord or plug, or after the appliance malfunctions

or is dropped or damaged in any manner.

Contact the nearest authorized service

facility for examination, repair, or electrical or

mechanical adjustment

Warning

Follow these precautions to prevent personal injury

during installation of this equipment:

• Installation must comply with all applicable

equipment fire and health codes with the authority

having jurisdiction.

•To avoid instability the installation area must be

capable of supporting the combined weight of the

equipment and product. Additionally the equipment

must be level side to side and front to back.

• Use appropriate safety equipment during

installation and servicing. Two or more people are

required to lift or move this appliance to prevent

tipping and/or injury.

• Do not damage the refrigeration circuit when

installing, maintaining or servicing the unit.

• Connect to a potable water supply only.

• This equipment contains refrigerant charge.

Warning

Follow these precautions to prevent personal injury

while operating or maintaining this equipment.

• Legs or casters must be installed and the legs/casters

must be screwed in completely. When casters

are installed the mass of this unit will allow it to

move uncontrolled on an inclined surface. These

units must be tethered/secured to comply with all

applicable codes. Swivel casters must be mounted on

the front and rigid casters must be mounted on the

rear. Lock the front casters after installation is

complete.

• Refer to nameplate to identify the type of refrigerant

in your equipment.

• Only trained and qualified personnel aware of the

dangers are allowed to work on the equipment.

• Read this manual thoroughly before operating,

installing or performing maintenance on the

equipment. Failure to follow instructions in this

manual can cause property damage, injury or death.

• Crush/Pinch Hazard. Keep hands clear of moving

components. Components can move without

warning unless power is disconnected and all

potential energy is removed.

• Moisture collecting on the floor will create a slippery

surface. Clean up any water on the floor immediately

to prevent a slip hazard.

Warning

Follow these precautions to prevent personal injury

while operating or maintaining this equipment.

• Objects placed or dropped in the bin can affect

human health and safety. Locate and remove any

objects immediately.

• Never use sharp objects or tools to remove ice or

frost.

• Do not use mechanical devices or other means to

accelerate the defrosting process.

• When using cleaning fluids or chemicals, rubber

gloves and eye protection (and/or face shield) must

be worn.

DANGER

Do not operate equipment that has been misused,

abused, neglected, damaged, or altered/modified

from that of original manufactured specifications.

This appliance is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

concerning use of the appliance by a person

responsible for their safety. Do not allow children to

play with, clean or maintain this appliance without

proper supervision.

DANGER

Follow these precautions to prevent personal injury

during use and maintenance of this equipment:

• It is the responsibility of the equipment owner to

perform a Personal Protective Equipment Hazard

Assessment to ensure adequate protection during

maintenance procedures.

• Do Not Store Or Use Gasoline Or Other Flammable

Vapors Or Liquids In The Vicinity Of This Or Any

Other Appliance.

• Never use flammable oil soaked cloths or

combustible cleaning solutions for cleaning.

• All covers and access panels must be in place and

properly secured when operating this equipment.

• Risk of fire/shock. All minimum clearances must be

maintained. Do not obstruct vents or openings.

• Failure to disconnect power at the main power

supply disconnect could result in serious injury or

death. The power switch DOES NOT disconnect all

incoming power.

• All utility connections and fixtures must be

maintained in accordance with the authority having

jurisdiction.

• Turn off and lockout all utilities (gas, electric, water)

according to approved practices during maintenance

or servicing.

• Units with two power cords must be plugged

into individual branch circuits. During movement,

cleaning or repair it is necessary to unplug both

power cords.

Table of Contents

General Information

Model Numbers

How to Read a Model Number

How to Read a Serial Number

Ice Cube Sizes

Model & Serial Number Location

Installation

Location of Ice Machine

Ice Machine Clearance Requirements

Ice Machine Heat of Rejection

Leveling the Ice Machine

Electrical Requirements

Electrical Specifications

Water Service/Drains

Water Supply

Water Inlet Line

Maintenance

Interior Cleaning & Sanitizing

Remedial Cleaning

Cleaning the Condenser

Removal from Service/Winterization

Bin Removal

Detailed Descaling and Sanitizing Procedure

WU-0100

Cleaning The Condenser

Removal from Service/Winterization

..............................................................14

...............................15

................................16

.....................17

.............................................18

.................19

...............................19

........................................20

................................................................17

...........................................21

................................................22

.........................................................22

...................................................22

Drain Connections ...............................................23

Water Supply & Drain Line

Sizing/Connections ...................................................24

.............................25

Detailed Cleaning & Sanitizing

Procedure IC/IU-0170 & IC/IU-0220 .................25

..............................................26

..................................36

...........37

...........................................................48

.........................................................................40

..................................51

...........52

Operation

Sequence of Operation

IC/IU-0170 & IC/IU-0220

Sequence of Operation

Error Codes

Operational Checks

Ice Thickness Check

Ice Thickness Adjustment

Minimum/Maximum Slab weight

Sequence of Operation WU-0100

WU-0100 Energized Parts Chart

Operational Checks WU-0100

Siphon System

Water Level

Water Level Check

Ice Thickness Check

...........................................53

Main Power Switch ...............................................53

........................................55

.............................................................61

Troubleshooting Error Codes ...........................63

.......................................................65

..............................................65

...................................65

....................67

.......................68

.......................70

..............................72

....................................................72

............................................................72

.................................................73

.............................................74

Troubleshooting

Ice Machine Cycles Into Harvest Before the

Harvest Float is down/closed

Ice Production Check

Installation/Visual Inspection Checklist

Water System Checklist

Ice Formation Pattern

Troubleshooting IC/IU-0170 & IC/IU-0220 ........75

Control Board (IC/IU-0170 & IC/IU-0220).......77

Diagnosing an Ice Machine

that Will Not Run .................................................80

Ice Machine Does Not Cycle Into Harvest when

the Harvest Float is down/closed ..............81

Ice Machine Does Not Cycle Into Harvest when

Water Touches Ice Thickness Probe..................82

..............................83

............................................85

......87

.......................................87

..........................................89

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels icetro Machine à glaçons

icetro

icetro IIS-320SA Manuel utilisateur

icetro

icetro SCI-035 Manuel utilisateur

icetro

icetro ID-0450-AN Manuel utilisateur

icetro

icetro IM-0350-AC/AH Manuel utilisateur

icetro

icetro IU-0090-AN Manuel utilisateur

icetro

icetro IM Series Manuel

icetro

icetro ID-150AN Manuel utilisateur

icetro

icetro IFI-770N Manuel utilisateur

icetro

icetro IM Series Manuel utilisateur

icetro

icetro IM-0770-AF Manuel utilisateur

icetro

icetro IM Series Manuel utilisateur

icetro

icetro IB-026-22 Manuel utilisateur

icetro

icetro IU / WU-0100-AC / ACNF Manuel utilisateur

icetro

icetro ID-H250-30 Manuel utilisateur

icetro

icetro A25B15O Manuel utilisateur

icetro

icetro IS-0700-AS Manuel utilisateur

icetro

icetro ISM-72L Manuel utilisateur

icetro

icetro IC Series Supplément

icetro

icetro IM Series Supplément

icetro

icetro IM-1100 Supplément

icetro

icetro IM-0350-AC Manuel utilisateur

icetro

icetro IM-770-AN Supplément

icetro

icetro A25B15 Manuel utilisateur

icetro

icetro ICI-050V Manuel utilisateur

Manuels Machine à glaçons populaires d'autres marques

Hoshizaki

Hoshizaki KMD-460MWJ Manuel utilisateur

Sub-Zero

Sub-Zero 315I Instructions d'utilisation

Unold

Unold 48945 Manuel utilisateur

Kenmore

Kenmore 2217402A Manuel utilisateur

Cornelius

Cornelius WM600 Mode d'emploi

GE XPIO43SCSS Manuel utilisateur

Hoshizaki

Hoshizaki KMD-901MAH Manuel utilisateur

Whynter

Whynter FIM-450HA Manuel utilisateur

U-Line

U-Line UMCR014-SC01A Manuel d'installation

Andrew James

Andrew James AJ000522 Manuel utilisateur

Scotsman

Scotsman CME1356 Manuel utilisateur

Scotsman

Scotsman ACM 25 Manuel utilisateur

Kärcher

Kärcher IP 120 Manuel utilisateur

U-Line

U-Line SS1095 Manuel utilisateur

Maytag

Maytag MIM1554WRS - Ice Maker Manuel utilisateur

Hoshizaki

Hoshizaki KM-630MAH Manuel utilisateur

Princess

Princess Yonanas Manuel utilisateur

Unold

Unold 48946 Manuel utilisateur

icetro WU-0100A Manuel utilisateur

Manuels Machine à glaçons populaires d'autres marques