IBM System Storage N3220 Manuel

IBM System Storage

N3220

Installation and Setup Instructions

Covering the N3220 model

GA32-2202-02



Notices

Mail comments to:

IBM Corporation

Attention Department GZW

9000 South Rita Road

Tucson, AZ 85744-0001

www.ibm.com/storage/support/nseries

References in this publication to IBM products or services do not imply that IBM intends to make them available in

every country or region.

IBM, the IBM logo, and ibm.com®are trademarks or registered trademarks of International Business Machines

Corporation in the United States, other countries, or both. A complete and current list of other IBM trademarks is

available on the web at .www.ibm.com/legal/copytrade.shtml

Data ONTAP, NetApp, and Network Appliance are trademarks and/or registered trademarks of NetApp, Inc in the

United States and other countries.

Other company, product, and service names may be trademarks or service marks of others.

US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract

with IBM Corp.

Contents

Before you begin ................................v

Overview of the N3220 .............................vii

Installation and setup instructions ........................1

Unpacking the N3220 filer ...............................1

Installing the rails in an IBM 19-inch rack .........................2

Installing the N3220 filer in the rack ...........................3

Setting storage expansion unit shelf IDs ..........................5

Setting SAS expansion unit shelf IDs ..........................5

Setting EXN4000 or EXN1000 storage expansion unit shelf IDs .................6

Attaching the cable management arms...........................6

Connecting the N3220 filer to a network ..........................7

Connecting the system to expansion units .........................9

Installing the power cables ..............................10

Setting up and booting the system in Data ONTAP 7-Mode ...................10

Setting up and booting the system in Clustered Data ONTAP ..................11

Appendix. Troubleshooting and additional resources................13

Troubleshooting tips ................................13

Additional resources ................................13

Before you begin

Read this information before beginning your installation.

Before you begin your installation, print and complete a Configuration worksheet for your storage system

to gather the information that the software setup process requires. The configuration worksheet is

provided in the Data ONTAP Software Setup Guide for your version of Data ONTAP, which is available on

the IBM®N series support website:

www.ibm.com/storage/support/nseries/

If you are configuring a storage system as part of a high-availability configuration, some information

types must be unique for each storage system mode in the configuration, and some information types

must be identical on both storage system nodes. If you have a high-availability configuration, IBM

recommends that you print and complete two copies of the configuration worksheet, one for each system

node.

About this document

This document provides installation and setup instructions for the IBM System Storage®N3220 filer

storage system.

For additional information about your system and related topics, refer to the following resources.

vIBM System Storage N3150, N3220, and N3240 Hardware and Service Guide

vIBM System Storage N series Introduction and Planning Guide

vIBM System Storage N series Safety Notices

vIBM Environmental Notices and User Guide

vIBM System Storage N series support website at www.ibm.com/storage/support/nseries/

Additional information about the N series storage expansion units you connect to your system can be

found in the Hardware and Service Guides and the Installation and Setup Instructions for your storage

expansion units.

Read the safety notices

Before continuing, make sure that you have reviewed the safety notices, IBM System Storage N series Safety

Notices, shipped with this product. Do not plug any cables into the system, adapters, or any electrical

outlets until you have reviewed the safety information and followed the procedures in this document.

Need help?

If you encounter any difficulties while setting up your system, contact IBM service and support for

assistance. Information can also be found on the IBM N series support website:

www.ibm.com/storage/support/nseries/

About the IBM N series support website

The IBM System Storage N series support website requires users to register in order to obtain access to N

series support content on the web. To understand how the N series support web content is organized and

navigated, and to access the N series support website, go to the following publicly accessible web page:

www.ibm.com/storage/support/nseries/

This web page also provides links to AutoSupport information as well as other important N series

product resources.

Items supplied by you for the installation

You need to supply the following items to complete the installation:

vEthernet LAN cables

vFibre Channel (FC) cables

vConsole (for example, a PC or notebook)

v#2 Phillips screwdriver and slotted screwdriver

Installing in a non-IBM rack

The rack installation instructions provided in this document apply specifically to the installation of the N

series product in an IBM 19-inch rack. IBM service personnel cannot install the N series product in a

non-IBM rack.

If the N series product is being installed in a non-IBM rack, the rails shipped with the N series product

may or may not work with the non-IBM rack. Physical installation of the N series product in a non-IBM

rack is the customer's responsibility.

Overview of the N3220

Refer to the following figures to familiarize yourself with the N3220.

1 Bezel 7 Left mounting flange

2 Shelf power LED 8 Operator display panel

3 Shelf fault LED 9 Disk drive activity LED

4 Shelf activity LED 10 Disk drive fault LED

5 Two-digit shelf ID digital display 11 Right mounting flange

6 Button for changing the shelf ID

Note: Disk drive bays are numbered horizontally starting from 0 to 23 (left to right).

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

n322001

78 9 10

Figure 1. Front view with and without bezel

1 SAS ports (2) 9 ACP port (locked wrench icon)

2 PCM fault LED 10 Gigabit Ethernet ports (4)

3 NVMEM LED 11 PSU OK LED

4 Mezzanine card ports 10 Gb option 12 DC fault LED

5 Mezzanine card ports 8 Gb Fibre Channel option 13 AC fault LED

6 Controller modules (1 or 2 depending on the

model)

14 Fan fault LED

7 Serial console port 15 Power supplies (2, each with integrated fans)

8 Remote Management port (wrench icon)

e0b e0d

e0a e0c

LNK LNK

0b 0a

e0b e0d

e0a e0c

LNK LNK

0b 0a

AC AC

LNKLNK

1a 1b

LNKLNK

e1a e1b

ACTACT

e0b e0d

e0a e0c

11 12 13

1 2 3

n322002

Figure 2. Rear view

viii

Installation and setup instructions

Use these instructions to install and set up your N3220 filer.

Unpacking the N3220 filer

Use these instructions to unpack the N3220.

Important: If your system was shipped already assembled and cabled in a rack, go directly to “Setting

up and booting the system in Data ONTAP 7-Mode” on page 10 or “Setting up and booting the system in

Clustered Data ONTAP” on page 11 depending on your configuration.

Each N3220 system enclosure ships with an accessories kit and set-up kit containing documentation and

hardware parts for installing your system. The quantity of hardware parts is determined by your system

configuration and requirements.

Each shipment container includes the following contents:

vN3220 system enclosure

vN3220 system bezel

vIBM System Storage N3220 Installation and Setup Instructions

vGeneral information kit, containing warranty, safety, and environmental information

vSoftware license

18-32 kg (39.7-70.5 lbs)

svc00167

CAUTION:

The weight of this part or unit is 25.4 kg (56.0 lb). It takes specially trained

persons, a lifting device, or both to safely lift this part or unit.

1. Remove the foam hardware protectors and the plastic surrounding the system.

2. Place the storage system on a table.

Contents for each N3220 model

The N3220 is a single-enclosure high availability (HA) capable system. Each N3220 model also ships with

at least one envelope with the software End User License Agreement (EULA) and license keys. The

following list describes the contents of the shipping packages included with the N3220 model:

vConsole adapters, RJ-45 to DB-9 (one per controller module)

vCable management arms (two per controller module)

v2 power cords

vSerial null modem cables (one per controller module)

v2U IBM rail kit

v1 ESD wrist strap

v1 set of IBM publications

Installing the rails in an IBM 19-inch rack

Use these instructions to install the rails on which you will mount the N3220 filer.

Note: Read this document in its entirety before proceeding.

1. Loosen (but do not remove) the four rail adjustment screws on each rail, as shown in Figure 3.

2. Refer to Figure 4 on page 3. At the front of the rack, position the right-hand rail in the rack at the

appropriate EIA location. Make sure that the two locating pins seat properly in holes H3 and H4. The

bottom of the rail should line up with the bottom EIA boundary.

Note: When installed, each N3220 will occupy a 2U space.

Right rail

Left rail

Front of rack

Rear of rack

Rail adjustment

screws

Locating pins

n620007

Figure 3. Installing the rails in the rack

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels IBM Stockage

IBM

IBM N6000 Series Manuel utilisateur

IBM

IBM System Storage DS5000 series Guide d'installation

IBM

IBM EXP5060 Manuel utilisateur

IBM

IBM DR550 V3.0 Instruction manuelle

IBM

IBM Cloud Object Storage System Manuel du propriétaire

IBM

IBM System storage DS6000 Series Manuel utilisateur

IBM

IBM XIV STORAGE SYSTEM Manuel utilisateur

IBM

IBM Elastic Storage System 3000 Manuel utilisateur

IBM

IBM Travelstar 15GN Manuel utilisateur

IBM

IBM N3240 Manuel

IBM

IBM System Storage DS5020 Guide d'installation

IBM

IBM LTO Generation 3 Manuel utilisateur

IBM

IBM Ultrastar 36LP Manuel utilisateur

IBM

IBM TS3400 Guide de configuration

IBM

IBM System Storage DS3400 Manuel utilisateur

IBM

IBM TotalStorage IP Storage 200i 110 Manuel utilisateur

IBM

IBM DS4700 EXPRESS Manuel utilisateur

IBM

IBM 0663 Series Manuel utilisateur

IBM

IBM N2225 Manuel utilisateur

IBM

IBM SAN384B Manuel

IBM

IBM Storwize V7000 Manuel d'utilisation

IBM

IBM Storwize V7000 Manuel utilisateur

IBM

IBM Ultrastar 36LZX Manuel utilisateur

IBM

IBM Ultrastar 36XP Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur