IBM TotalStorage DS4100 Mode d'emploi

IBM TotalStorage DS4100 Storage Server

Installation, User’s, and Maintenance Guide

GC26-7712-00



IBM TotalStorage DS4100 Storage Server

Installation, User’s, and Maintenance Guide

GC26-7712-00



Note:

Before using this information and the product it supports, be sure to read the general information in “Notices” on page 127.

First Edition (November 2004)

US Government Users Restricted Rights –Use, duplication or disclosure restricted by GSA ADP Schedule Contract

with IBM Corp.

Safety

The caution and danger statements that this document contains can be referenced

in the multilingual IBM

Safety Information document that is provided with your IBM

TotalStorage

DS4100 storage server. Each caution and danger statement is

numbered for easy reference to the corresponding statements in the translated

document.

vDanger: These statements indicate situations that can be potentially lethal or

extremely hazardous to you. Adanger statement is placed just before the

description of apotentially lethal or extremely hazardous procedure, step, or

situation.

vCaution: These statements indicate situations that can be potentially hazardous

to you. Acaution statement is placed just before the description of apotentially

hazardous procedure step or situation.

vAttention: These notices indicate possible damage to programs, devices, or

data. An attention notice is placed just before the instruction or situation in which

damage could occur.

Before installing this product, read the following danger and caution notices.

©Copyright IBM Corp. 2004 iii

Statement 1:

DANGER

Electrical current from power, telephone, and communication cables is

hazardous.

To avoid ashock hazard:

vDo not connect or disconnect any cables or perform installation,

maintenance, or reconfiguration of this product during an electrical

storm.

vConnect all power cords to aproperly wired and grounded electrical

outlet.

vConnect to properly wired outlets any equipment that will be attached to

this product.

vWhen possible, use one hand only to connect or disconnect signal

cables.

vNever turn on any equipment when there is evidence of fire, water, or

structural damage.

vDisconnect the attached power cords, telecommunications systems,

networks, and modems before you open the device covers, unless

instructed otherwise in the installation and configuration procedures.

vConnect and disconnect cables as described in the following table when

installing, moving, or opening covers on this product or attached

devices.

To Connect: To Disconnect:

1. Turn everything OFF.

2. First, attach all cables to devices.

3. Attach signal cables to connectors.

4. Attach power cords to outlet.

5. Turn device ON.

1. Turn everything OFF.

2. First, remove power cords from outlet.

3. Remove signal cables from connectors.

4. Remove all cables from devices.

iv IBM TotalStorage DS4100 Storage Server: Installation, User’s, and Maintenance Guide

Statement 3:

CAUTION:

When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or

transmitters) are installed, note the following:

vDo not remove the covers. Removing the covers of the laser product could

result in exposure to hazardous laser radiation. There are no serviceable

parts inside the device.

vUse of controls or adjustments or performance of procedures other than

those specified herein might result in hazardous radiation exposure.

DANGER

Some laser products contain an embedded Class 3A or Class 3B laser

diode. Note the following.

Laser radiation when open. Do not stare into the beam, do not view directly

with optical instruments, and avoid direct exposure to the beam.

Class 1Laser statement

IEC 825-11993 CENELEC EN 60 825

Safety v

Statement 4:

≥18 kg (39.7 lb) ≥32 kg (70.5 lb) ≥55 kg (121.2 lb)

CAUTION:

Use safe practices when lifting.

Statement 5:

CAUTION:

The power control button on the device and the power switch on the power

supply do not turn off the electrical current supplied to the device. The device

also might have more than one power cord. To remove all electrical current

from the device, ensure that all power cords are disconnected from the power

source.

vi IBM TotalStorage DS4100 Storage Server: Installation, User’s, and Maintenance Guide

Statement 8:

CAUTION:

Never remove the cover on apower supply or any part that has the following

label attached.

Hazardous voltage, current, and energy levels are present inside any

component that has this label attached. There are no serviceable parts inside

these components. If you suspect aproblem with one of these parts, contact

aservice technician.

Safety vii

viii IBM TotalStorage DS4100 Storage Server: Installation, User’s, and Maintenance Guide

Table des matières

Autres manuels IBM Serveur de stockage réseau

IBM

IBM TotalStorage NAS Gateway 300 Manuel de programmation

IBM

IBM TotalStorage NAS 300 Manuel utilisateur

IBM

IBM TotalStorage DS4300 Turbo Manuel utilisateur

IBM

IBM SAN512B-6 Manuel

IBM

IBM 2073-700 Manuel utilisateur

IBM

IBM E10 Manuel utilisateur

IBM

IBM 220 Manuel du propriétaire

IBM

IBM TotalStorage FAStT700 Manuel utilisateur

IBM

IBM N3700 A20 Manuel

IBM

IBM SAN256B-6 Manuel

IBM

IBM DS3500 Manuel utilisateur

IBM

IBM 7979A1U Manuel utilisateur

IBM

IBM TotalStorage DS4500 Manuel utilisateur

IBM

IBM 5147-084 Manuel utilisateur

IBM

IBM totalstorage 200 Manuel

IBM

IBM TotalStorage FAStT600 Manuel utilisateur

IBM

IBM TotalStorage FAStT700 Manuel utilisateur

IBM

IBM SAN06B-R Manuel

IBM

IBM TotalStorage FAStT600 Manuel utilisateur

IBM

IBM Flex System 68Y8588 Manuel utilisateur

IBM

IBM TOTAL STORAGE NAS 100 Manuel de programmation

IBM

IBM TOTALSTORAGE NAS 200 Manuel utilisateur

IBM

IBM x Series 200 Manuel du propriétaire

IBM

IBM 9370 Manuel utilisateur

Manuels Serveur de stockage réseau populaires d'autres marques

HP NetStorage 6000 Manuel utilisateur

Seagate

Seagate U10 ST320423A Manuel utilisateur

Synology

Synology RackStation RS816 Manuel

D-Link

D-Link ShareCenter Pro DNS-1200-05 Manuel utilisateur

Avid Technology

Avid Technology VideoRAID ST Guide de sécurité

Western Digital

Western Digital My Cloud Home Duo Manuel utilisateur

PrimeArray

PrimeArray 4xxx Manuel utilisateur

Buffalo

Buffalo TeraStation WSS WSH5010N6 Manuel utilisateur

Planex

Planex MZK-NAS01SG Manuel utilisateur

Intel

Intel SS4000-E - Entry Storage System NAS Server Manuel utilisateur

Synology

Synology RS2212+ Manuel utilisateur

Allnet

Allnet ALL69000 Manuel utilisateur

Adaptec

Adaptec 5325301580 Manuel utilisateur

Motorola

Motorola EXORdisk II Manuel utilisateur

Sony

Sony XDAAI1PK Manuel utilisateur

Cisco

Cisco Linksys NAS200 Instructions d'utilisation d'origine

Sans Digital

Sans Digital MR4UT6G Manuel utilisateur

AIC

AIC FB128-LX Manuel utilisateur