IBM PCI WAN 2 Port S91 Manuel utilisateur

Wide Area Network

Adapters

IBM PCI WAN 2 Port S91

IBM PCI WAN MultiPort T1/E1 S94

IBM PCI WAN MultiPort T1/E1 P92

Installation Guide

OPTIONS

by IBM

Part Number: 33L4649

First Edition (January 1999)

The following paragraph does not apply to the United Kingdom or any country

where such provisions are inconsistent with local law: INTERNATIONAL

BUSINESSMACHINESCORPORATIONPROVIDES THIS PUBLICATION

"AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR

IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE. Some states do not allow disclaimer of express or

implied warranties in certain transactions, therefore, this statement may not

apply to you.

This publication could include technical inaccuracies or typographical errors.

Changes are periodically made to the information herein; these changes will be

incorporated in new editions of the publication. IBM may make improvements

and/or changes in the product(s) and/or the program(s) described in this

publication at any time.

It is possible that this publication may contain reference to,or information about,

IBM products (machines and programs), programming, or services that are not

announced in your country. Such references or information must not be

construed to mean that IBM intends to announce such IBM products,

programming, or services in your country.

Requests for technical information about IBM products should be made to your

IBM reseller or IBM marketing representative.

Note to U.S. Government Users – Documentation related to restricted rights –

Use, duplication or disclosure is subject to restrictions set forth in GSA ADP

Schedule Contract with IBM Corp.

Note Before using this information and the product it supports, be sure to read the

general information in Product Warranty and Notices.

Table of Contents

Overview .....................................................................................................1

IBM PCI WAN 2 Port S91......................................................................1

IBM PCI WAN MultiPort T1/E1 P92.....................................................1

IBM PCI WAN MultiPort T1/E1 S94.....................................................2

Hardware Installation ..................................................................................3

Software Installation....................................................................................3

PCI System Setup........................................................................................3

Connection Status Indicators.......................................................................4

IBM PCI WAN 2 Port S91......................................................................4

IBM PCI WAN MultiPort T1/E1 S94 and

IBM PCI WAN MultiPort T1/E1 P92 ....................................................5

Configuring the IBM WAN Adapters.........................................................6

Making an ISDN Connection......................................................................7

Making a VHSI Connection........................................................................8

VHSI Port Interface Specifications .............................................................9

VHSI Cable Construction Information.................................................10

The V.24 Interface ................................................................................11

The V.35 Interface ................................................................................13

The EIA-530 Interface..........................................................................15

The V.36/RS-449 Interface...................................................................17

The X.21 Interface ................................................................................19

Back-to-Back Connections ...................................................................20

Product Warranty.......................................................................................21

Limitation of Liability...............................................................................24

Trademarks................................................................................................24

Telecommunication Notices......................................................................25

Electronic Emission Notices......................................................................28

1Overview

Overview

This guide describes how to install and configure the following IBM WAN

Adapters:

• IBM PCI WAN 2 Port S91

• IBM PCI WAN MultiPort T1/E1 P92

• IBM PCI WAN MultiPort T1/E1 S94

IBM PCI WAN 2 Port S91

The IBM PCI WAN 2 Port S91 is a PCI Plug-and-Play (PnP) card that offers

X.25 connectivity through a high-speed port (supporting V.24, V.35, EIA-530,

V.36/RS-449, or X.21 interfaces) at speeds of up to 2 Mbps, and/or through an

ISDN BRI port at speeds of up to 128 kbps (over the “D” channel or the “B”

channels).

Note The IBM PCI WAN 2Port S91alsosupportsprotocols such asSDLC, PPP, and Frame

Relay.

Hardware Features

The IBM PCI WAN 2 Port S91 features a 25 MHz Motorola 68302

microprocessor with 1 MB of RAM and 1 MB of FLASH memory. It has two

communications ports:

• an ISDN BRI port supporting transfer rates of up to 128 kbps (over the “D”

channel or the “B” channels)

• a Very High-Speed Interface (VHSI) port, supporting full duplex communi-

cations over a V.24, V.35, EIA-530, V.36/RS-449, or X.21 interface at speeds

of up to 2 Mbps (depending on the type of interface selected)

Ease of Use

The VHSI port features automatic interface selection. The intelligent controller

on the IBM PCI WAN 2 Port S91 detects the type of cable connected to the port

and automatically selects the matching interface.

IBM PCI WAN MultiPort T1/E1 P92

The IBM PCI WAN MultiPort T1/E1 P92 allows stand-alone PCs or multiple

users on a Local Area Network (LAN) to make very high speed connections to

a Wide Area Network (WAN). These connections are typically madethrough the

IBM PCI WAN MultiPort T1/E1 P92 to external communications equipment

(including CSUs, DSUs, and synchronous and asynchronous modems) to

provideaccesstoWAN lines.Direct connectionstoahostcomputerorto another

IBM PCI WAN MultiPort T1/E1 P92 are also supported.

Overview 2

Hardware Features

The IBM PCI WAN MultiPort T1/E1 P92 features a 10MHz Hitachi 64570

controller and 512 KB of on-board RAM. It has two independent Very High-

Speed Interface (VHSI) ports, supporting full duplex communications over a

V.24, V.35, EIA-530, V.36/RS-449, or X.21 interface at speeds of up to 2 Mbps

per port, depending on the type of interface selected.

Ease of Use

The IBM PCI WAN MultiPort T1/E1 P92 is a Plug and Play adapter with

automatic interface selection. In most cases, no hardware configuration is

required after installing the IBM PCIWAN MultiPort T1/E1 P92 andconnecting

the appropriate cable. The intelligent controller on the card detects which

interfaces the cable supports and automatically configures that port accordingly.

IBM PCI WAN MultiPort T1/E1 S94

The IBM PCI WAN MultiPort T1/E1 S94 allows stand-alone PCs or multiple

users on a Local Area Network (LAN) to make very high speed connections to

a Wide Area Network (WAN). These connections are typically madethrough the

IBM PCI WAN MultiPort T1/E1 S94 to external communications equipment

(including CSUs, DSUs, and synchronous and asynchronous modems) to

provideaccesstoWAN lines.Direct connectionstoahostcomputerorto another

IBM PCI WAN MultiPort T1/E1 S94 are also supported.

Hardware Features

The IBM PCI WAN MultiPort T1/E1 S94 features a 33 MHz Motorola 68360

microprocessor with 2 MB of RAM and 1 MB of FLASH memory. It has two

independent Very High-Speed Interface (VHSI) ports, supporting full duplex

communications over a V.24, V.35, EIA-530, V.36/RS-449, or X.21 interface at

speeds of up to 2 Mbps per port (depending on the type of interface selected).

Ease of Use

The IBM PCI WAN MultiPort T1/E1 S94 features automatic interface selection.

The intelligent controller on the card detects the type of cable connected to each

port and automatically selects the matching interface.

3 Hardware Installation

Hardware Installation

Note Please refer to the user manual that came with your personal computer for detailed

installation instructions.

Use the following procedure to install your IBM WAN Adapters.

1. Set the host computer system power switch to OFF and disconnect the

power cord.

2. Locate a free PCI expansion slot.

3. Insert and secure the board firmly into the expansion slot.

4. Replace the power cord and turn the host computer system ON.

Software Installation

Refer to the Quick Start Card that came with the CD ROM for detailed

instructions on loading the Software Driver.

PCI System Setup

Peripheral Component Interconnect (PCI) system architecture has a design

feature termed Plug and Play. This feature automatically detects, identifies and

configures the currently installed devices each time the system is booted.

Therefore, whenever a WAN Adapter is installed (or removed) in a PCI system,

the Adapter is recognized and configured immediately upon restart.

Connection Status Indicators 4

Connection Status Indicators

IBM PCI WAN 2 Port S91

Asshown inFigure 1below,the IBMPCIWAN2PortS91 hasthreestatuslights

(LEDs) on the end bracket. Two of these lights indicate the status of the ISDN

connection, and the third identifies the card during configuration.

Figure 1: Status Lights

D-channel Status

The D-channel controls the link to your ISDN

service provider.

Off ...........Theline is not active. Thecable may

not be connected.

Blinking...The line is active, but a link can’t be

established. This may be a symptom

of incorrect configuration.

Steady......The ISDN line is active and

operating normally.

B-channel Status

The B-channels are used for the link to the

remote ISDN device.

Off........... There is no connection.

Blinking... Attempting to connect to the remote

device.

Steady...... The connection is active and able to

transmit data.

Configuration Status

This status light illuminates during

configuration to indicate which card is being

configured. This is most useful when more than

one card is installed in the PC.

Consult the documentation provided with the

configuration software for information about

this status light.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels IBM Adaptateur

IBM

IBM EN2024 Manuel utilisateur

IBM

IBM PCIe3 x8 SAS RAID internal adapter 6 Gb Manuel utilisateur

IBM

IBM Flex System FC3052 Manuel utilisateur

IBM

IBM POWER GXT135P Graphics PCI Mode d’emploi

IBM

IBM Gigabit Fibre Channel PCI Mode d’emploi

IBM

IBM Emulex Manuel utilisateur

IBM

IBM Power System 8247-21L Manuel utilisateur

IBM

IBM SSA 32H3816 Manuel utilisateur

IBM

IBM Flex System EN4132 Manuel utilisateur

IBM

IBM Flex System FC5024D Manuel utilisateur

IBM

IBM 00AE861 Manuel

IBM

IBM N2125 Manuel d'installation

IBM

IBM PCI Dual Channel Ultra3 SCSI Adapter Mode d’emploi

IBM

IBM ThinkPad i Series Manuel utilisateur

IBM

IBM 64-bit/66MHz PCI ATM MMF Mode d’emploi

IBM

IBM Remote Supervisor Adapter II Manuel utilisateur

IBM

IBM ServeRAID Manuel utilisateur

IBM

IBM 16/4 Token-Ring Manuel utilisateur

IBM

IBM 4-Port 10/100 Base-TX Ethernet PCI Mode d’emploi

IBM

IBM NetXtreme II 1000 Manuel utilisateur

IBM

IBM Brocade Manuel utilisateur

IBM

IBM 4684 Store Loop Adapter/A Manuel utilisateur

IBM

IBM FC5022 Manuel utilisateur

IBM

IBM Remote Supervisor Adapter Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur