Hyundai R329DP Series Instructions de montage
Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple model if applicable]
LCD Monitor / R329DP*
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic
instructions for the disassembly of HKC IT products to remove components and materials requiring selective treatment,
as defined by EU directive 2012/19/EU, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatement
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description Notes
Quality
of items
included
in product
Printed Circuit Board (PCB) or Printed Circuit
Assemblies (PCA) With a surface greater than 10 sq 5
Batteris All types including standard alkaline and lithium
coin or button style batteries None -
Mercury-containing components For example, mercury in lamps, display backlights.
Scanner lamps, swithches, batteries -
Liquid Crystal Display (LCD) with a surface
greater than 100 sq cm
Included background illuminated displays with gas
discharge lamps 1
Cathode Ray Tubes (CRT) None
Capacitors / Condensers (Containing PCB/PCT) None
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height Electrolytic Capacitors 1
External electrical cables and cords DP cable, HDMI cable 2
Gas Discharge Lamps None -
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or
PCAs already listed as a separate item above)
None -
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and
toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations. None -
Components and wates containing asbestos None -
Components, parts and materials containing
refactory ceramic fibers None -
Components, parts and material containing
radioactive substances None -
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where
components and materials requiring selective treatment can be removed.
Tool Description
Tool Size
(if
applicable)
Screwdrivers and 1
Plastic Jig 1
Nipper 1
Product Disassembly Process
List the basic steps that should typically be followed to remove components and materials requiring selective
tratement:
1. With the aid of a screwdriver, loosen the four screws of stand.
2. Loosen the two screws of rear cover with screwdriver and then disassemble the rear cover from set.
3. Disconnect the backlight wire from the panel.
4. Loosen the three screws of driver board with screwdriver then disassemble driver board from set.
5. Loosen the six screws of mainboard cover with screwdriver then disassemble mainboard cover from set.
6. Loosen the four screws of mainboard with screwdriver then disassemble mainboard from set.
7. Loosen the four screws of speakers with screwdriver then disassemble speakers from set.
8. Disconnect the LVDS cable from the panel.
9. Loosen the five screws of front frame with screwdriver.
10. Loosen the six screws of Middle frame with screwdriver then disassemble middle frame from set.
1. Disassemble and Assemble
2. Disassemble Product
1. Unscrew the 3 points screw on Cover stand assembly using a screwdriver
2. unscrew the 3 points screw under Front cover
3. Remove the cover from the bottom of monitor
by using the jig or “-“driver.
4. disassemble from left side of monitor
bottom
5. disassemble top side of monitor
6. disassemble right side of monitor
7. Place the monitor as shown in the figure, hold the bottom of the rear cover and remove the rear cover.
8. Disconnect the usb extension cable.
9. Unscrew the screws 6 points to remove the front cover.
10. separate tape of 2 points.
11. Separate Boards
11-1 Separate main board.
Unscrew 4 points with screw driver and disconnect cables. ( LVDS/Inverter/Speakers/OSD/Power)
Key board
Main board Power board
Disconnect cables
11-2 Separate Power board.
Unscrew 4points with screw driver and separate the shield cover.
After separate the shield cover, unscrew 4points on the power board.
Electrolytic Capacitors are removed using a Nipper and then separated and processed separately.
11-3 Separate Key board and others.
Unscrew 6points with screw driver and remove each parts.
Table des matières
Autres manuels Hyundai Moniteur
Hyundai
Hyundai P240W Manuel utilisateur
Hyundai
Hyundai L22C0FLC0 Manuel utilisateur
Hyundai
Hyundai L19T Manuel utilisateur
Hyundai
Hyundai ImageQuest L550S Manuel utilisateur
Hyundai
Hyundai D400ML Manuel utilisateur
Hyundai
Hyundai D32AM Manuel utilisateur
Hyundai
Hyundai ImageQuest LM1510A Manuel utilisateur
Hyundai
Hyundai ImageQuest L550 Manuel utilisateur
Hyundai
Hyundai ImageQuest LM1510A Manuel d'utilisation
Hyundai
Hyundai ImageQuest V570 Manuel utilisateur
Hyundai
Hyundai ImageQuest L17T Manuel d'utilisation
Hyundai
Hyundai ImageQuest L50AF Manuel d'utilisation
Hyundai
Hyundai ImageQuest V773 Manuel utilisateur
Hyundai
Hyundai ImageQuest L550B Manuel utilisateur
Hyundai
Hyundai X93S Manuel utilisateur
Hyundai
Hyundai P278DPL Manuel utilisateur
Hyundai
Hyundai ImageQuest F771 Manuel utilisateur
Hyundai
Hyundai 21FOM Series Manuel utilisateur
Hyundai
Hyundai P90W Manuel utilisateur
Hyundai
Hyundai ImageQuest Q19 Manuel utilisateur
