Hytronik DS05 Guide rapide

Technical Speciﬁcations

Product type Daylight Sensor

Operating voltage 220-240VAC 50Hz

Rated load Max. 800W (Resistive)

Max. 400W (Capacitive)

Power consumption < 0.5W

Daylight threshold 2Lux, 10Lux, 30Lux, 50Lux, 100Lux, 300Lux, 500Lux, Disable

Warmming up time 20s

Operating temperature -20ºC ~ +60ºC

IP rating IP20

DS05-20170623-A1

Installation and Instruction Manual

Fixture Built-in Daylight Sensor DS05

Dimensions (mm)

2. Loop-in and loop-out

Double L N terminal makes it easy for wire loop-in and loop-out, saves the cost of terminal block and

assembly time.

1. Lux Off Function

The built-in daylight sensor can measure ambient natural light. It will switch off the ﬁxture in 5minutes

automatically, whenever artiﬁcial light is not required (natural light lux level exceeds daylight threshold).

Note: if the daylight threshold is preset at “disable”, the ﬁxture will never switch off even when natural

light is sufﬁcient.

Functions

Wiring Diagram

Daylight sensor

Daylight threshold

Infrared receiver

Installation hole

LED Driver

DS05

220 - 240VAC

Settings

Daylight Threshold

Set the lux level according to the real application environment. Light keeps off if ambient daylight is

sufﬁcient (above the threshold preset). With insufﬁcient natural light, light will automatically turn on.

Light will never switch off when daylight threshold is set to disable.

123 4 5 6

2 Lux

10 Lux

30 Lux

123456

100 Lux

300 Lux

500 Lux

50 Lux

All manuals and user guides at all-guides.com

Description of the Button Functions

(remote control HRC-11)

HRC-11

DS05-20170623-A1

Hytronik Industrial Ltd. | www.hytronik.com

3rd Floor, block C, complex building, 155#, Bai'gang road south,

Bai'gang village, Xiao Jin Kou town, Huicheng district, Huizhou 516023

Tel: 86-752-2772020 Fax: 86-752-2777877

RESET [ button ]

Press button , all settings go back to the DIP switch settings.

Shift [ button ]

Press button , the LED on the top left corner ﬂashes to indicate mode selection. All values / settings in RED are

in valid for 20 seconds.

Auto Mode [ button ]

Press button to initiate automatic mode. The sensor starts working and all settings remain as before the light

was switched ON/OFF.

Note: The function of “SEMI-AUTO” is disabled.

Permanent ON/OFF [ ]

Press button to select permanent ON or permanent OFF mode.

* Press button / to resume automatic operation.

button

2 4

Ambient daylight threshold [ button ]

1. Press button Shift, the red LED ﬂashes for indication.

2. Press button , the ambient lux level is sampled and set as the new daylight threshold.

Press buttons in zone to set the daylight threshold at 2Lux / 10Lux /50Lux / 100Lux / 300Lux /

500Lux or Disable.

Note: 1. Light will never switch off when daylight threshold is preset at disable.

2. To set daylight sensor at 100Lux / 300 Lux / 500Lux, press button Shift at ﬁrst.

Daylight threshold [ zone ]

Test 2S [ zone ]

This button is for test purpose only, light will switch on when natural light lux level is below daylight threshold

preset; or switch off when natural light lux level exceeds daylight threshold preset for 10S.

Note: buttons in zone are disabled.

5 9

All manuals and user guides at all-guides.com

Autres manuels Hytronik Accessoires

Hytronik

Hytronik HIM39/RF Guide rapide

Hytronik

Hytronik Dual Sense HIM11 Manuel utilisateur

Hytronik

Hytronik HMW38/RF Guide rapide

Hytronik

Hytronik HIR28DCVFC Guide rapide

Hytronik

Hytronik HBHC25 Guide rapide

Hytronik

Hytronik HIM32 Guide rapide

Hytronik

Hytronik HC005S/BT Guide rapide

Hytronik

Hytronik HMW35 Guide rapide

Hytronik

Hytronik HIM38/RF Manuel utilisateur

Hytronik

Hytronik HCD418/DH Manuel utilisateur

Hytronik

Hytronik HMW30 Manuel utilisateur

Hytronik

Hytronik HIM31 Guide rapide

Hytronik

Hytronik HIM34 Manuel utilisateur

Hytronik

Hytronik HIM31 Guide rapide

Hytronik

Hytronik HC038V Manuel utilisateur

Hytronik

Hytronik HIM30 Manuel utilisateur

Hytronik

Hytronik HN020-01V Manuel utilisateur

Hytronik

Hytronik HMW25 Guide rapide

Hytronik

Hytronik HBIR30/CA Guide rapide

Hytronik

Hytronik HC403VRC-KD/I Manuel utilisateur

Hytronik

Hytronik HC401SRC/R Manuel utilisateur

Hytronik

Hytronik HMW38/RF Manuel utilisateur

Hytronik

Hytronik HC419S Manuel utilisateur

Hytronik

Hytronik HMW14 Guide rapide

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur