Hydro Crunch T5 Manuel utilisateur
T5 Fluorescent Fixture
Instruction Manual
IMPORTANT PRODUCT INFORMATION
READ IMMEDIATELY
SAFETY FIRST!
Failure to observe the following safety warnings may result in serious injury or death. Use all
Hydro Crunch™ products only as directed. Failure to observe these safety warnings will result in
a waiver of any and all liability on the part of Hydro Crunch™ its manufacturer, and resellers,
and will void all warranties to the extent permitted by law.
WARNINGS AND INSTRUCTIONS
FOR USE:
Disconnect power before re-lamping.
When re-lamping, make sure lamp has time to cool before touching.
Make sure power cord is connected properly
DO NOT hang by power cord or lamp cord.
DO NOT make contact with the interior of the socket while the power is on.
DO NOT plug or unplug a lamp cord while the ballast is turned on.
ALWAYS unplug the ballast from the power source before connecting or disconnecting
any lighting device to ballast, moving ballast, or otherwise touching or handling ballast or
its components.
DO NOT use with generators. Warranty will be voided.
NEVER stand beneath the ballast.
NEVER put hands or any other objects in the interior of the ballast.
DO NOT operate this or any lighting system in wet areas.
DO NOT plug this system into a supply voltage other than what is instructed on your
fixture.
DO NOT attempt open or rewire the components of the light system. It will void the
warranty and may cause serious injury or death.
If any part of the lamp is damaged, replace lamp immediately.
Disconnect the unit from a power source before replacing lamps or any other parts.
When replacing lamps, make sure the lamp has had time to cool before touching.
Make sure power cord and lamp cord are connected securely to the unit.
These products operate at very high temperatures. Keep away from children.
Glass is required for reflectors using metal halide (MH) lamps for UL listing to apply.
Glass is not required for high pressure sodium (HPS) lamps to be UL listed.
Always use a three prong timer rated for 15 amps or more with light systems.
Do not operate lamps that are a different wattage than the ballast specifies.
Read all instructions completely before attempting to power on unit. Failure to follow
the warnings and instructions for use may result in serious injury or death, for which
Hydro Crunch™'s manufacturer and resellers expressly disclaim any and all liability.
BULB INFORMATION:
If there are bulbs that don’t fire, make sure that the lamp is properly inserted and seated in the
socket. If that does not work try swapping the bulbs around for others that are working. This will
help determine if it is the bulbs or the fixture that is defective.
Hydro Crunch™ T5 FLUORESCENT SETUP
1. Remove the T5 system from its box along with all additional parts.
2. Hang the unit to a secure surface using the wire cable hangers provided (optional light
hanger systems can be purchased separately). Never stand underneath the unit.
3. Install lamps (examine the label to determine the correct lamp) into the system. Insert
both ends of the lamp into the lamp sockets and rotate the lamp 90 ° in either direction.
You will feel a small click when it is properly seated.
4. Hydro Crunch™ T5 units can be daisy chained
together. Do not exceed 7.5 amps on any fixtures
chained together. Do not daisy chain more fixtures
than what is recommended. Chaining more fixtures
together than recommended will void the warranty.
Always unplug T5 systems from the power source prior
to moving, connecting, chaining, disconnecting, or
otherwise handling lighting systems.
5. Finally, connect T5 system to a power source.
Daisy Chain Feature
Fixture Type
Max # Chained
T522
12
T524
6
T528
4
T544
5
T546
3
T548
3
T5 Fixture Package Contents
• T5 Fluorescent Fixture
• T5 Bulbs
Color Temperature: 6400K
Size: 2 or 4 foot
• Cable hangers
• Instruction Manual
Specifications
Volts: 120V / 60Hz
Cord length: 8’ grounded power cord
Mounting: Vertical or Horizontal orientation
Compatibility: 120V receptacle located on unit allows for multiple “daisy chain” option (see
diagram)
Fixture
Type
Dimensions (LxWxH)
Weight
Lumens
(up to)
Watts
Amps
T522
2 FT. 2 Lamp: 23.25” L x 7.5” W x 2 3/8”H
7 lbs.
4000
48W
.4A
T524
2 FT. 4 Lamp: 23.25"L x 13"W x 2 3/8”H
10 lbs.
8000
96W
.8A
T528
2 FT. 8 Lamp: 23.25” L x 13"W x 2 3/8”H
16 lbs.
16,000
192W
1.6A
T544
4 FT. 4 Lamp: 46.25"L x 13"W x 2 3/8”H
19 lbs.
20,000
216W
1.8A
T546
4 FT. 6 Lamp: 46.25"L x 18.5"W x 2 3/8”H
26.3 lbs.
30,000
324W
2.7A
T548
4 FT. 8 Lamp: 46.25"L x 24"W x 2 3/8”H
31.4 lbs.
40,000
432W
3.6A
Troubleshooting
1. CHECK YOUR ELECTRICAL SOURCE: Make sure the unit is plugged in properly and
that the breaker is not tripped or fuse blown.
2. FOR T5 FLUORESCENT FIXTURES: Check to ensure lamps are properly locked into
place. This is accomplished by turning the lamps ¼ turn in either direction.
3. Try a different lamp if you have one available. Make sure unit is unplugged when
changing lamps.
1 Year Limited Warranty Service
If the product will not work after you have read the troubleshooting guide and practiced the
troubleshooting options, you are advised to return the Hydro Crunch™ light system to the retailer you
purchased it from. The dealer will be able to examine the light and test its components. If they are not
able to repair the light, they will return it to us for examination and repair/replacement. Do not attempt to
repair any product on your own, as serious injury or death may result. If the retailer is not able to help you
and the light is still under manufacturer’s warranty, you may contact us for technical support. In some
cases, you will be issued an RMA# (return merchandise authorization number) to return the unit for
factory repair. Complete the warranty form below and return the light with all original packaging, your
receipt of purchase, and a valid RMA# to the address below. Please pack and ship the light in its original
packaging. If it is damaged in shipment we cannot be responsible and the warranty may be voided. Once
we receive RMA package, it will be repaired or replaced and shipped back to you. Please note if an
additional warranty was purchased and include the extended warranty sales receipt with your return.
RETURN FORM
Include the following if returning:
Proof of purchase
This completed form
RMA# on the outside of the box
Extended warranty receipt
Return Merchandise Authorization Number (Required): ___________________________________
Contact Name: _____________________________________________________________________
Address: __________________________________________________________________________
__________________________________________________________________________________
Phone #: __________________________________________________________________________
Email Address: ____________________________________________________________________
Please give a brief description of your technical issue: ___________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
SEND TO:
Hydro Crunch
20651 Golden Spring Drive Suite 115
Walnut, CA 91789
714-516-8176
IMPORTANT!
Do not dispose product or any other part of it as unsorted municipal waste –instead it shall be
handed over to the applicable collection point for the recycling of electrical and electronic
equipment.
The following pages contain important safety and operating instructions.
Please read and follow all instruction in this manual. Carefully read and review
all safety instructions, warnings and cautions contained in this manual.
Failure to read and follow these instructions, warnings and cautionary
statements may result in severe injury or death to persons and pets or
damage to personal property.
Table des matières
Autres manuels Hydro Crunch Luminaire
Manuels Luminaire populaires d'autres marques
Emos
Emos CLASSIC ZY1431T Manuel utilisateur
Westinghouse
Westinghouse Outdoor Lighting Fixture Manuel utilisateur
Hedler
Hedler C 12 silent Manuel utilisateur
Blizzard Lighting
Blizzard Lighting Puck: CSI Manuel utilisateur
Energetic Lighting
Energetic Lighting ELYSL-5004 Series Manuel utilisateur
Lightmaxx
Lightmaxx Shaft 5R Manuel utilisateur
Cooper Lighting
Cooper Lighting Halo L3232E Manuel utilisateur
Stageline
Stageline ODW-2410RGBW Manuel utilisateur
Light Sky
Light Sky Tornado Series Manuel utilisateur
Lightolier
Lightolier Paralyte 2424 PLA2G9LS26U Manuel utilisateur
Lightolier
Lightolier Lytespan 83ED17S Manuel utilisateur
Lightolier
Lightolier Calculite CS8226 Manuel utilisateur