Hyco W27 Series Manuel utilisateur
W27 Series Product
CCD Ring Scanner
Product Specification
www.hycoiot.com
W27 CCD Ring Scanner Manual and Specification
1
Disclaimer
Disclaimer @ 2018 Shanghai Hyco Genyong Technology Co., Ltd. All rights
reserved.
Please read through the manual carefully before using the product and operate
it according to the manual. It is advised that you should keep this manual for
future reference.
Once the products mentioned in this manual are used, you will be deemed to
have carefully read the disclaimer and warning, understand, recognize and
accept all the terms and contents of this declaration. You promise to use the
product only for proper purposes, and bear corresponding responsibilities for
the use of the products described in this manual and the possible
consequences.
Do not disassemble the device or remove the seal label from the device.
Otherwise, Shanghai Hyco Genyong Technology Co., Ltd. does not assume
responsibility for the warranty or replacement.
All pictures in this manual are for reference only and actual product may differ.
W27 CCD Ring Scanner Manual and Specification
2
Regarding to the product modification and update, Shanghai Hyco Genyong
Technology Co., Ltd. reserves the right to make changes to any software or
product to improve reliability, function, or design at any time without notice.
Besides, the information contained herein is subject to change without prior
notice.
The products depicted in this manual may include software copyrighted by
Shanghai Hyco Genyong Technology Co., Ltd. or a third party. The user,
corporation or individual, shall not duplicate, in whole or in part, distribute,
modify, decompile, disassemble, decode, reverse engineer, rent, transfer or
sublicense such software without prior written consent from the copyright
holders.
This manual is copyrighted. No part of this publication may be reproduced or
used in any form without written permission from Hyco.
Please visit www.hycoiot.com or check the latest version of the specification
sheet for the latest product information
W27 CCD Ring Scanner Manual and Specification
3
Version Information
Version
Date
Updates
V1.0
2017.7.12
Initial Release
V1.1
2019.7.10
Revise pictures of wearing
method and scan angle
V1.2
2019.9.6
Revise full charged
working time test inform
V2.0
2020.7.20
Revise description
W27 CCD Ring Scanner Manual and Specification
4
Menu
Overview............................................................................................................................................ 5
Product Features......................................................................................................................6
Product advantage................................................................................................................... 6
Product demostration...............................................................................................................6
How to wear.......................................................................................................................................7
How to charge................................................................................................................................... 8
Charge via W2X/SC100 cradle..............................................................................................9
Charge via C20 charging station........................................................................................... 9
Replacing the ring strap................................................................................................................ 10
How to replace the ring strap............................................................................................... 10
Specifications.................................................................................................................................. 11
Indicator light...................................................................................................................................14
Vibration reminder..........................................................................................................................14
Scan angle specification....................................................................................................15
Scan distance specification.......................................................................................................... 16
Update scanner firmware..............................................................................................................18
Packing detail..................................................................................................................................19
Battery Safety Guide..................................................................................................................... 21
Appendix..........................................................................................................................................23
Function setting barcode...................................................................................................... 23
Common setting...........................................................................................................233
Add Enter/Tab...................................................................................................................25
Trigger mode setting......................................................................................................26
Turn on/off identifiable symbology.............................................................................. 27
Decode digits setting..................................................................................................... 28
Preamble barcode output setting .............................................................................. 32
Supplemental barcode output setting.......................................................................33
FULL ASCII Switch...................................................................................................... 333
Bluetooth disconnect alarm setting.............................................................................34
Automatic scan setting..................................................................................................35
W27 CCD Ring Scanner Manual and Specification
5
Overview
In addition to extract price information at the checkout counter in supermarkets, the purpose of scanning
barcodes/2D codes/RFID in the express delivery, logistics, supply chain, food and drug tracing management,
intelligent manufacturing and other fields is for responsibility division, which is intended to function as an
electronic signature in each shift.
Even though the traditional hand-held scanning machine and PDA meet the demand of responsibility division
in data collecting, monitoring and tracing, they occupy one hand of the user during the whole scanning process,
which negatively affects the operational efficiency. Thus, how to satisfy the need of full-scan tracing without
disturbing efficiency has always been a common goal for all scientific and technological workers, as well as clients
and customers.
After 10 years of independent R&D, HYCO Technology has achieved the goal of handiness, comfort, and world
leading Bluetooth connecting distance and reliability.
Users could wear HYCO ring scanner on any finger on either hand (index finger is suggested). With a light
touch on both sides of the scanner, they can complete fast scanning by aligning the crosshair cursor with the
codes. Within a second, the data acquired will be sent to all kinds of devices and systems via Bluetooth.
W27 CCD Ring Scanner Manual and Specification
6
Product Features
Extremely small & light: weighs only 20g with tireless long-time wearing experience
Rugged quality: IP66; waterproof; crush resistance up to 3m
Comfort wearing: substitutable ring straps made of sweat-proof materials to satisfy various
sized fingers.
Ultra-low power consumption: world leading low power consuming technology, over 8hrs
battery life guaranteed.
CCD scanning: original ultra-low-power CCD scanner designed by HYCO. Supports recognitions
of barcodes on labels or on screen.
Stabilized Bluetooth communication: fast and stable Bluetooth data transmission; 50m
communication distance in free space.
Multiple protocols and communication ports: supports Bluetooth/USB/RS232 connection with
any electronic devices such as smart watches, phones, laptops, PCs, POSs, IPCs, PLCs, etc.
Product advantage
Hands-free and efficient
Reducing the labor intensity
Ultra-low power consumption and green
Recognize codes on labels or on screen
Light, flexible, ease of use
Reinforce brand identity with customers
Rich accessories
Product demonstration
Scan Window
Ring Strap
Indicator Light
Left Touch button
Charging Contact
Front View
W27 CCD Ring Scanner Manual and Specification
7
Back View
How to wear
The wearing method of this product is shown in the picture 1 below. The product can be
worn on the third joint of the index finger of the left or right hands to adapt to the tightness of
the ring strap. If it feels too tight or too loose, you can replace the silicone ring strap with an
appropriate size. (You can check the related content of "Replace the Ring strap" in this
sheet)
Touch the left or right touch button area with your thumb. The scanner emits light for barcode
recognition. When the indicator light flashes green and the scanner vibrates, it means the
scanning is successful.
It can also be worn on other fingers, just tap the corresponding scanning area on the left
and right sides.
Right touch button
W27 CCD Ring Scanner Manual and Specification
8
Figure 1
How to charge
Connect the charging cradle to the power source, and place the Scanner into the charging
cradle as shown in Figure 2 (the scanning lens of the Scanner is upward), and then charging
starts.
The charging status indicator turns red to indicate that it is charging, and green to indicate
that the battery is fully charged, and charging is complete.
Note: Please make sure that the ring strap is pushed to the bottom of the scanner slot
W27 CCD Ring Scanner Manual and Specification
9
★
In order to avoid triggering the light when taking out the Scanner from the charging cradle
and directing the eyes to cause injury. Therefore, it is set that after the Scanner is charged, it
needs to touch three times in a row to emit light normally.
Figure 2
Charge via C20 Smart Charger
Figure 3
充电指示灯
Bluetooth Indicating LED
W2X charging cradle (Bluetooth receiver)
Charging Indicating LED
Charging Contact Point
C20 Smart Charger
Charging Indicating LED
Autres manuels pour W27 Series
1
Table des matières
Autres manuels Hyco Scanner
Hyco
Hyco W28 Series Manuel utilisateur
Hyco
Hyco W79 Series Manuel utilisateur
Hyco
Hyco W26 Manuel utilisateur
Hyco
Hyco W28 Series Manuel utilisateur
Hyco
Hyco W75 Series Manuel utilisateur
Hyco
Hyco W27 Series Manuel utilisateur
Hyco
Hyco W26 Manuel utilisateur
Hyco
Hyco W26 Manuel utilisateur
Hyco
Hyco W28LD Series Manuel utilisateur
