Husqvarna AUTOMOWER 310 Manuel utilisateur
EN, English
Operator's manual
HUSQVARNA AUTOMOWER®
310/315/315X
Read the operator's manual carefully and make sure that you
understand the instructions before you use the product.
Contents
1 Introduction
1.1 Introduction.................................................3
1.2 Product overview Automower®
310/315/315X................................................... 4
1.3 Symbols on the product..............................5
1.4 Symbols on the display.............................. 5
1.5 Symbols on the battery...............................6
1.6 General manual instructions.......................6
1.7 Menu structure overview - 1....................... 7
1.8 Menu structure overview - 2....................... 8
1.9 Display........................................................9
1.10 Keypad..................................................... 9
2 Safety
2.1 Safety information.................................... 10
2.2 Safety definitions...................................... 11
2.3 Safety instructions for operation...............11
3 Installation
3.1 Introduction - Installation.......................... 15
3.2 Main components for installation..............15
3.3 General preparations................................15
3.4 Before the installation of the wires........... 15
3.5 Installation of the product......................... 20
3.6 To put the wire into position with stakes...22
3.7 To bury the boundary wire or the
guide wire....................................................... 23
3.8 To extend the boundary wire or the
guide wire....................................................... 23
3.9 After the installation of the product...........23
3.10 To do the product settings......................24
4 Operation
4.1 Main switch...............................................36
4.2 To start the product.................................. 36
4.3 Operating mode Start............................... 36
4.4 Operating mode Park............................... 37
4.5 To stop the product.................................. 37
4.6 To switch off the product.......................... 37
4.7 Schedule and Standby............................. 37
4.8 To charge the battery............................... 38
4.9 Adjust the cutting height........................... 39
5 Maintenance
5.1 Introduction - maintenance.......................40
5.2 Clean the product..................................... 40
5.3 Replace the blades...................................41
5.4 Battery...................................................... 41
5.5 Winter service...........................................42
6 Troubleshooting
6.1 Introduction - troubleshooting...................43
6.2 Fault messages........................................ 43
6.3 Information messages.............................. 48
6.4 Indicator lamp in the charging station.......49
6.5 Symptoms................................................ 50
6.6 Find breaks in the loop wire..................... 51
7 Transportation, storage and disposal
7.1 Transportation.......................................... 54
7.2 Storage.....................................................54
7.3 Disposal....................................................54
8 Technical data
8.1 Technical data.......................................... 55
8.2 Registered trademarks............................. 57
9 Warranty
9.1 Warranty terms.........................................58
10 Applicable to US/CA market
10.1 Supplier's Declaration of Conformity...... 59
10.2 Compliance requirements...................... 59
21440 - 003 - 09.03.2020
1 Introduction
1.1 Introduction
Serial number:
PIN code:
The serial number is on the product rating plate and on the product carton.
• Use the serial number to register your product on www.husqvarna.com.
1.1.1 Support
For support about the product, speak to your
Husqvarna servicing dealer.
1.1.2 Product description
Note: Husqvarna regularly updates the
appearance and function of the products. Refer
to
Support on page 3
.
The product is a robotic lawn mower. The product
has a battery power source and cuts the grass
automatically. It continuously alternates between
mowing and charging. The movement pattern is
random, which means that the lawn is mowed
evenly and with less wear. The boundary wire
and the guide wire controls the movement of the
product within the work area. Sensors in the
product senses when it is approaching the
boundary wire. The front of the product always
passes the boundary wire by a specific distance
before the product turns around. When the
product hits an obstacle or approaches the
boundary wire the product selects a new
direction.
The operator selects the operation settings with
the keys on the keypad. The display shows the
selected and possible operation settings, and the
operation mode of the product.
1.1.2.1 Mowing technique
The product is emission free, easy to use and
saves energy. The frequent cutting technique
improves the grass quality and decreases the
use of fertilizers. Collection of grass is not
necessary.
1.1.2.2 Find the charging station
The product operates until the battery state of
charge is low. Then it follows the guide wire to
the charging station. The guide wire is laid from
the charging station towards, for instance, a
remote part of the work area or through a narrow
passage. The guide wire is connected with the
boundary wire and makes it much easier and
faster for the product to find the charging station.
1.1.2.3 Automower® Connect
Automower® Connect is a mobile application that
makes it possible to select the operation settings
remotely. Refer to
Automower® Connect app on
page 33
.
1440 - 003 - 09.03.2020 Introduction - 3
1.2 Product overview Automower® 310/315/315X
Automower® 310/315 Automower® 315X
1
13
14
15
2
34
5
6
10
9
8
12
16
11
1917 18
23
21
20
22
26
27 28
24
29
30 31
32
33
7
25
The numbers in the figure represent:
1. Body
2. Hatch to cutting height adjustment
3. Hatch to display and keypad
4. Stop button
5. Replaceable cover
6. Rear wheels
7. Front wheels
8. Headlights
9. Cutting height adjustment
10. Contact plates
11. LED for operation check of the charging
station and boundary wire
12. Charging station
13. Rating plate (incl. product identification
code)
14. Display
15. Keypad
16. Cutting system
17. Chassis box with electronics, battery and
motors
18. Handle
19. Main switch
20. Blade disc
21. Skid plate
22. Power supply (the appearance may differ
depending on market)
4 - Introduction 1440 - 003 - 09.03.2020
23. Loop wire for boundary loop and guide wire
1
24. Couplers for loop wire 2
25. Stakes3
26. Connector for the loop wire 4
27. Screws for securing the charging station
28. Measurement gauge for help when installing
the boundary wire (the measurement gauge
is broken loose from the box)
29. Operator’s Manual and Quick Guide
30. Cable markers
31. Extra blades
32. Low voltage cable
33. Alarm decal
1.3 Symbols on the product
These symbols can be found on the product.
Study them carefully.
WARNING: Read the
user instructions before
operating the product.
WARNING: Disable the
product before working on
or lifting the product.
WARNING: Keep a safe
distance from the product
when operating. Keep
your hands and feet away
from the rotating blades.
WARNING: Do not ride
on the product. Never put
your hands or feet close
to or under the product.
Never use a high-pres-
sure washer or even run-
ning water to clean the
product.
Use a detachable power
supply as defined on the
rating label next to the
symbol.
This product conforms to the
applicable EC Directives.
Noise emission to surroundings. The
product’s emissions are set out in
Technical data on page 55
and on the
rating plate.
It is not permitted to dispose this
product as normal household waste.
Ensure that the product is recycled in
accordance with local legal
requirements.
The chassis contains components
which are sensitive to electrostatic
discharge (ESD). The chassis must
also be resealed in a professional
manner. For these reasons the chassis
shall only be opened by authorized
service technicians. A broken seal can
result in the entire or parts of the
guarantee no longer being valid.
The low voltage cable must not be
shortened, extended or spliced.
Do not use a trimmer nearby the low
voltage cable. Be careful when
trimming edges where the cables are
placed.
1.4 Symbols on the display
The schedule function controls when
the product cuts the lawn.
The security function lets the operator
select between 3 security levels.
1Is a part of the Installation kit which is purchased separately.
2Refer to note 1
3Refer to note 1
4Refer to note 1
1440 - 003 - 09.03.2020 Introduction - 5
The messages function shows error
messages and possible cause for the
problems.
The weather timer function
automatically adapts the cutting
intervals to the grass growth.
The installation function for manual
settings for the installation.
The settings function is where the
general settings for the products are
set.
The accessories function is where all
settings for the accessories for the
product are set.
The product will not cut the grass do to
the schedule function.
The product overrides the schedule
function.
The battery indicator shows the charge
level of the battery. When the product
charges the symbol flashes.
The product is put in the charging
station but do not charge the battery.
The product is set in ECO-mode.
For Automower® Connect and
Connect@Home. Bluetooth® wireless
communication with your mobile
device.
The GPS-supported navigation is
active. Flashes as it collects GPS
information. Automower® 315X
The GPS-supported navigation is not
active. Automower® 315X
1.5 Symbols on the battery
Read the user instructions.
Do not discard the battery into fire and
do not expose the battery to a heat
source.
Do not immerse the battery into water.
1.6 General manual instructions
The following system is used in the Operator’s
Manual to make it easier to use:
• Text written in
italics
is a text that is shown
in the display or is a reference to another
section in the Operator’s Manual.
• Text written in bold is one of the buttons on
the product.
• Text written in
UPPERCASE
and
italics
refer
to the different operating modes available in
the product.
6 - Introduction 1440 - 003 - 09.03.2020
1.7 Menu structure overview - 1
Security
Low Medium High Duration
Duration
of alarm
Duration
of time lock
Change
PIN code
New loop
signal
Security level
Fault
messages
Info
messages
Messages
Use weather timer
Low Medium High
Cutting time
Weather timer *
* Automower®315/315X
Advanced
Schedule
Overview/Monday
Period 1 Period 2 Copy
Su Current
day
All weekSaFrThWeTuMoAll
days
Reset
1440 - 003 - 09.03.2020 Introduction - 7
1.8 Menu structure overview - 2
Installation
Lawn
coverage
Area 1-3
Find charging station
Guide
Delay
time
Test
guide
Reset Test
left
Test
right
Reset
Disable More Disable More
Boundary Charger
Charging
station range
How? How
often?
How
far?
Disable
ResetTest
More Exit
angles
Corridor
width
Reversing
distance
Drive past
wire
Advanced
Information Mower house
Accessories
Settings
ECO mode
Use
Profiles *
Select Rename Save
Profile A,
B or C Time &
date
Set time Set date Time format Date format
Language Country &
Timezone
Reset all
user setting
About
LowLow- High High+Mid
Intensity
Spiral cutting General
Use Use Use
Unit
Format
Delay
time
GPS Auto***
Slope control
Connect@Home** Headlight***
* Automower®315/315X
**Automower®310/315
***Automower®315X
Automower
Connect
8 - Introduction 1440 - 003 - 09.03.2020
1.9 Display
The display on the product shows information
and settings of the product.
To access the display, push the STOP button.
1.10 Keypad
Use the keypad on the product to navigate in the
menu. To access the keypad, push the STOP
button.
• Use the START button (A) to start the
operation of the product.
• Use the BACK button (B) to move up in the
menu lists.
• Use the arrow buttons (C) to navigate in the
menu.
• Use the OK button (D) to confirm the
settings you select in the menus.
• Use the MENU button (E) to go to the main
menu.
• Use the PARK button (F) to send the
product to the charging station.
• Use the number buttons (G) to enter PIN
code, time and date.
A E
F
B D
C
G
1440 - 003 - 09.03.2020 Introduction - 9
2 Safety
2.1 Safety information
2.1.1 IMPORTANT. READ CAREFULLY
BEFORE USE. KEEP FOR FUTURE
REFERENCE
The operator is responsible for accidents or hazards occurring to
other people or property.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities (that
could affect a safe handling of the product), or lack of experience
and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved. Local regulations
may restrict the age of the operator. Cleaning and maintenance
shall not be made by children without supervision.
Never connect the power supply to an outlet if the plug or cord is
damaged. Worn or damaged cord increase the risk of electric
shock.
Only charge the battery in the included charging station. Incorrect
use may result in electric shock, overheating or leaking of
corrosive liquid from the battery. In the event of leakage of
electrolyte, flush with water/neutralizing agent. Seek medical help if
it comes in contact with the eyes.
Use only original batteries recommended by the manufacturer.
Product safety cannot be guaranteed with other than original
batteries. Do not use non-rechargeable batteries.
10 - Safety 1440 - 003 - 09.03.2020
Autres manuels pour AUTOMOWER 310
16
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Husqvarna Tondeuse à gazon
Husqvarna
Husqvarna MZ28T Manuel utilisateur
Husqvarna
Husqvarna Royal 47 Manuel utilisateur
Husqvarna
Husqvarna YTH1746B Manuel utilisateur
Husqvarna
Husqvarna AUTOMOWER 105 Manuel utilisateur
Husqvarna
Husqvarna R 318X Manuel utilisateur
Husqvarna
Husqvarna YTH2042 Manuel utilisateur
Husqvarna
Husqvarna Rider 11 Manuel d'instructions
Husqvarna
Husqvarna Z454X Manuel utilisateur
Husqvarna
Husqvarna LT2218A Manuel utilisateur
Husqvarna
Husqvarna L 321AHX Manuel utilisateur
Husqvarna
Husqvarna 917.384517 Manuel utilisateur
Husqvarna
Husqvarna AUTOMOWER 430XH Manuel utilisateur
Husqvarna
Husqvarna PZ29D CE Manuel utilisateur
Husqvarna
Husqvarna Z 254 Manuel utilisateur
Husqvarna
Husqvarna 962000107 Manuel utilisateur
Husqvarna
Husqvarna Rider 111B Manuel utilisateur
Husqvarna
Husqvarna 87521RSX Manuel utilisateur
Husqvarna
Husqvarna AUTOMOWER 420 Manuel utilisateur
Husqvarna
Husqvarna TC 238TX Manuel utilisateur
Husqvarna
Husqvarna 968999268 Manuel utilisateur
Manuels Tondeuse à gazon populaires d'autres marques
RHINO
RHINO 1958 Manuel utilisateur
Wolf Garten
Wolf Garten Compact plus 40 B Manuel utilisateur
Cub Cadet
Cub Cadet LTX 1045 Manuel utilisateur
Craftsman
Craftsman 917.378461 Manuel utilisateur
GGP ITALY SPA
GGP ITALY SPA CR/CS 434 SERIES Manuel utilisateur
Challenge
Challenge CH18V2 Instructions de fonctionnement
TALEN TOOLS
TALEN TOOLS AVR HGM30 Manuel utilisateur
DEWEZE
DEWEZE ATM-725 Manuel d'utilisation
Weed Eater
Weed Eater 180083 Manuel utilisateur
Better Outdoor Products
Better Outdoor Products Quick Series Manuel utilisateur
Cub Cadet
Cub Cadet 23HP Z-Force 60 Manuel d'utilisation
MTD
MTD 795, 792, 791, 790 Manuel utilisateur
