Hunter ST Series Manuel utilisateur

ST-1700V

OWNER’S MANUAL

ST-1700V

Long-Range Synthetic Turf Rotor

Page 2

RESIDENTIAL & COMMERCIAL IRRIGATION |Built on Innovation®

Overview

Valve-in-Head

The Valve-in-Head design integrates

the control valve, solenoid, and manual

On-O-Auto detector within the rotor’s

heavy-duty, impact-resistant case.

The convenient and compact design is

appreciated by installers and end users.

Total-Top-Serviceability

With Total-Top-Serviceability, every

serviceable component can be accessed

from the surface without cutting into

the synthetic turf. The spacious ange

compartment can accommodate full-

sized waterproof splice connectors, and

the compartment can hold a decoder for

two-wire control system applications.

Key Benets

• Heavy-duty internal gear drive and

stainless steel pop-up riser provide

years of reliable operation

• Long-range performance exibility up

to 165' (48 m) with ve nozzles choices

• Full-circle and adjustable arc in one

model from 40° to 360°

• Adjustable speed of rotation using the

adjustment knob to set the speed to

your requirements

Important

The water may contain foreign objects

such as sand, rocks, and other impurities,

which can damage the rotor. To avoid

these problems, it may be necessary to

install a lter.

Aer Installation

Troubleshooting non-rotation aer

installation:

1. Check for plugged secondary nozzle.

2. Check for a blocked propeller in

turbine assembly.

Troubleshooting non-operation aer

connecting to a decoder system:

1. Check for proper wire connections.

2. Switch the two solenoid wires.

hunter.direct/st1700vhelp +1 760-591-7383

Troubleshooting

Find more helpful information about your product, including installation tips, and more.

Hunter’s synthetic turf rotors are designed to cool, clean, and ush synthetic sports elds.

The ST-1700V long-range synthetic turf rotor oers high-performance irrigation from the eld

perimeter while integrating Valve-in-Head (VIH) capabilities and a Total-Top-Service (TTS) design

to simplify installation and maintenance. With the same heavy-duty internal gear drive as the

proven ST-1600-HS-B rotor, the ST-1700V provides years of reliable operation.

Caution

• Do not perform any adjustments or

controls during operation.

• Stand clear of the action area of the

rotor and the water jet.

• Ensure the water jet is not directed

toward persons, animals, power lines,

roads, or other objects.

Page 3

|Visit support.hunterindustries.com

Lower Flange

O-Ring

Stainless

Steel Piston

Product Dimensions

• Overall height: 26⁄" (68 cm)

• Pop-up height: 5" (13 cm)

• Exposed diameter: 13" x 15⁄" (33 cm x 39 cm)

• Inlet size: 2" (50 mm) BSP*

Actuator

Turbine Housing

Gearbox

Boot

Piston Flange

Snap Ring

2" (50 mm) BSP Inlet

Valve-in-Head

Inlet Filter

Valve O-Ring

Secondary Brass

Nozzle

Primary

Nozzle

Speed

Control Knob

Solenoid

Arc Adjustment

Rings

Reversing

Mechanism

Product Details

15⁄" (39 cm)

12" (30 cm)

(13 cm)

26⁄"

(68 cm)

2" (50 mm) BSP

Operating Specications

• Radius: 105' to 157' (32 to 48 m)

• Flow: 92.4 to 259 GPM (21.0 to 58.8 m3/hr;

350 to 980 l/min)

• Operating pressure range: 60 to 120 PSI (4.0 to 8.0 bar; 400

to 800 kPa)

• Speed of rotation: 80 seconds at 120 PSI (6 bar; 600 kPa) in a

single 180° sweep

*Use P/N 241400SP adapter to 2" (50 mm) PVC pipe

if needed.

13"

(33 cm)

Page 4

RESIDENTIAL & COMMERCIAL IRRIGATION |Built on Innovation®

Replacement Parts

ITEM DESCRIPTION CATALOG NO.

1 Primary Nozzle Retainer 502402SP

2 Primary Nozzle Kit

#16 784800SP

#18 784801SP

#20 784802SP

#22 784803SP

#24 784804SP

3Secondary Nozzle

Kit

Female-threaded

nozzle with elbow 10005900SP

Male-threaded

nozzle 10006100SP

4 Speed Control Knob 510101SP

5 Gearbox Cover 502455

6 Turbine Assembly Kit 10006200SP

7 Reversing Kit 510164SP

8 Turret Inlet Kit 510167SP

9 Threaded Rotor Inlet 893600SP

10 Arc Rings (2) 205617SP

11 Gear Drive Assembly 881900SP

12 Rotor Cover Kit 204205SP

13 Upper Body Kit 10006300SP

14 Solenoid Actuator Kit 10006400SP

15 Actuator Cover 10006500SP

16 Riser Assembly 502436SP

17 Rubber Boot 502423

18 Snap Ring 10006600SP

19 Valve-in-Head 10006700SP

20 Lower Body Kit 10006800SP

21 Gear Drive Insertion/Removal Tool 517600SP

22 Valve-in-Head Insertion/Removal Tool 10000100SP

23 Snap Ring Removal Tool 251000SP









































Page 5

|Visit support.hunterindustries.com

Servicing and Maintenance

A. Replacing the cover and rotor

1. Remove the center plug with a at-

blade screwdriver and unscrew the

nut underneath. The lid will li o.

2. Use the gear drive insertion/removal

tool to unscrew the rotor from the

piston.

3. The tool will grab onto the screws

underneath the rotor.

E. Accessing the valve-in-head

Remove the rotor (see Step A). Remove

the boot. Unscrew the six Allen bolts on

the piston ange. Remove the piston.

1. Remove the snap ring with the

snap ring removal tool.

2. Remove the valve with the valve

insertion/removal tool.

B. Replacing the propeller

1. Remove the eight screws on the

turbine housing (six large, two

small). The propeller will pull out of

the housing.

C. Accessing the solenoid

1. Remove the three screws from the

top of the solenoid housing. The

housing lis o.

➋

➌

➊

➊ ➋

➊

D. Part-circle and 360° operation

1. Li up the cover. Set the arc

adjustment rings to the desired arc

(this can be done by hand).

2. Remove both adjustment rings

completely to allow full 360°

operation.

Page 6

RESIDENTIAL & COMMERCIAL IRRIGATION |Built on Innovation®

Installation Guide

Use “T” handle tool (P/N 319100SP) to

operate solenoid actuator.

➊

➏

➐

➑

➒

⑩

➋

➍

➎

➌

ACTUATOR

Page 7

|Visit support.hunterindustries.com

Installation Guide

SOLENOID COMPARTMENT DETAIL

1Discharge port (OPEN)

2Discharge port (AUTO)

3Solenoid*

4Water line to lter

5Water line to valve-in-head

* If connecting to a two-wire system, there is potential for miswiring the solenoid. Should your solenoid not re during

system start-up, your rst troubleshooting measure should be to swap the two solenoid wires.

INSTALLATION DETAIL

1ST-1700V synthetic turf rotor

2Synthetic turf per plan

3Aggregate base per plan

4Control wire to solenoid

52" (50 mm) BSP connection

6Union tting per plan

7Compacted substrate

8Optional isolation valve

9Coarse rock for drainage

10 Compacted soil where applicable

Page 8

RESIDENTIAL & COMMERCIAL IRRIGATION |Built on Innovation®

For safe and easy access to internal

components, position the ange

compartment away from the nozzle direction.

Field Layouts

International soccer pitch, with a #24 nozzle installed, operating at 90 PSI (6.0 bar; 600 kPa)

Page 9

|Visit support.hunterindustries.com

For safe and easy access to internal

components, position the ange

compartment away from the nozzle direction.

Field Layouts

Field hockey eld, with a #20 nozzle installed, operating at 100 PSI (7.0 bar; 700 kPa)

Page 10

RESIDENTIAL & COMMERCIAL IRRIGATION |Built on Innovation®

ST1700V PERFORMANCE CHART IMPERIAL

Nozzle Pressure Radius Flow Precipitation in/hr*

PSI GPM

16 60 105 92.4 1.61 1.86

70 114 100 1.48 1.71

90 120 114 1.52 1.76

100 126 124 1.50 1.74

115 130 134.1 1.53 1.76

18 60 111 107 1.67 1.93

70 119 115 1.56 1.81

90 126 127 1.54 1.78

100 131 137 1.54 1.77

115 137 148.9 1.53 1.76

20 60 114 134.1 1.99 2.29

70 127 151 1.80 2.08

90 135 164 1.73 2.00

100 141 180 1.74 2.01

115 146 193.7 1.75 2.02

22 60 115 153.7 2.24 2.58

70 127 174 2.08 2.40

90 141 189 1.83 2.11

100 149 206 1.79 2.06

115 154 222.2 1.80 2.08

24 60 121 1 7 7.2 2.33 2.69

70 132 201 2.22 2.56

90 144 222 2.06 2.38

100 154 240 1.95 2.25

115 157 259 2.02 2.34

* Precipitation rates are shown with head-to-head coverage.

Notes:

All radius measurements are taken at standard rotation speeds.

25°

26'

130'

137'

146'

154'

157'

105'

111'

114'

115'

121'

Nozzle #16

Nozzle #18

Nozzle #20

Nozzle #22

Nozzle #24

Autres manuels pour ST Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Hunter Système d'irrigation

Hunter

Hunter G800 Series Manuel utilisateur

Hunter

Hunter Professional Series PGP Manuel utilisateur

Hunter

Hunter TTS-800 Series Manuel utilisateur

Hunter

Hunter Institutional I-20 Manuel utilisateur

Hunter

Hunter Institutional Series Manuel utilisateur

Hunter

Hunter X-CORE Mode d'emploi

Hunter

Hunter Professional Series Manuel utilisateur

Hunter

Hunter Institutional Series Manuel utilisateur

Hunter

Hunter Institutional Series I-90 Manuel utilisateur

Hunter

Hunter Professional Series Manuel utilisateur

Hunter

Hunter Institutional Series Manuel utilisateur

Hunter

Hunter Institutional I-40 Series Manuel utilisateur

Hunter

Hunter Professional Series Manuel utilisateur

Hunter

Hunter PRO-C Hydrawise Manuel utilisateur

Hunter

Hunter ST Series Manuel utilisateur

Hunter

Hunter Institutional I-40 Manuel utilisateur

Hunter

Hunter Institutional Series I-25 Plus Manuel utilisateur

Hunter

Hunter I-80 Manuel utilisateur

Hunter

Hunter Hydrawire Manuel utilisateur

Hunter

Hunter PRO-C Hydrawise Manuel utilisateur

Hunter

Hunter SRC Plus 600i Manuel utilisateur

Hunter

Hunter ST Series Manuel utilisateur

Hunter

Hunter Institutional Series Manuel utilisateur

Hunter

Hunter Professional PGP Ultra Series Manuel utilisateur

Manuels Système d'irrigation populaires d'autres marques

Cellfast

Cellfast 52-305 Manuel utilisateur

Tyco Fire Product

Tyco Fire Product Star Galaxy SGQR Manuel utilisateur

Tyco Fire Product

Tyco Fire Product CENTRAL A Manuel utilisateur

Oral Care Technologies

Oral Care Technologies Hydro Floss Manuel utilisateur

Reliable

Reliable F1-300 Manuel utilisateur

Tyco Fire Product

Tyco Fire Product Gem F892 Manuel utilisateur

Netafim

Netafim NETBEAT Manuel utilisateur

Irrigation-Mart

Irrigation-Mart KIT-GK100-RV-B Manuel utilisateur

Tyco

Tyco CC3 Manuel utilisateur

Reliable

Reliable F4FR Manuel utilisateur

OpenSprinkler

OpenSprinkler OSPi Manuel utilisateur

EINHELL

EINHELL GE-WW 5537 E Manuel utilisateur

Valley

Valley Bender160 Manuel utilisateur

Reliable

Reliable F1FR42 Series Manuel utilisateur

Reliable

Reliable F1FR-300 Manuel utilisateur

Toro

Toro 730 Series Guide rapide

Eden

Eden 97063-EDAMZ Manuel utilisateur

Tyco

Tyco TY-L Series Manuel utilisateur