Hunter 90434 Manuel utilisateur

OscillatingOscillatingOscillating

44827-01

20111013

Stand Fan

Owner’s Manual

English

Model

90405

90434

90435

TABLE OF CONTENTS

Introduction ............................................................. 3

Safety and Warnings................................................ 3

Grounding............................................................... 5

Unpacking............................................................... 6

Base Assembly......................................................... 6

Attaching Motor Housing to Pole .............................. 7

Grill Assembly ......................................................... 8

Operation.............................................................. 10

Off / Speed Selection

Oscillation

Adjustment

Maintenance.......................................................... 11

Technical Support................................................... 12

Warranty............................................................... 12

Products ................................................................ 14

INTRODUCTION

To reduce the risk of fire or electrical shock, DO NOT use

this fan with any solid-state speed control device.

When using electrical appliances, basic precautions

should always be taken to reduce the risk of fire, electric

shock and personal injury:

Read all instructions before using this fan.

1. Improper installation may result in the risk of fire,

electric shock or personal injury.

2. To prevent the risk of fire and electric shock, DO

NOT use the unit near windows. Rain and moisture

may create an electrical hazard.

3. The power plug must be removed from the power

socket when not in use, before cleaning, servicing,

maintenance and before moving to another location.

4. DO NOT put fan in a damp place or where humidity

is high, such as a bathroom.

5. The fan should be placed on a flat, stable surface to

avoid overturning.

6. Use fan only for intended use, as described in this

instruction manual.

7. To protect against electrical shock, DO NOT immerse

any part of the unit in water or spray with liquids.

Thank you for choosing the Hunter Oscillating Stand

Fan. This manual gives you complete instructions for

assembling and using your fan. Here are some the

features you will enjoy with your fan:

3An attractive design that enhances any decor

3A powerful motor for maximum air flow

3Three speeds to adjust your comfort level

3All metal construction

3Parts of this fan, including the blades and the grill,

have been treated with Hunter’s Dust Armor Protection,

making them less likely to attract dust and dirt.

SAFETY AND WARNINGS

8. Close supervision is necessary when any appliance

is used near children.

9. NEVER insert fingers, pencils or any other objects

through the grill when the fan is running.

10. DO NOT operate any appliance with a damaged

cord or plug, after the appliance malfunctions or has

been dropped or damaged in any manner.

11. To disconnect, grip plug and pull from wall outlet.

NEVER yank on cord.

12. ALWAYS use on a dry surface.

13. This product is intended for household use only and

not for commercial or industrial use.

14. DO NOT operate fan in the presence of explosive

and/or flammable fumes.

15. DO NOT place fan or any parts near an open flame,

cooking or any other heating appliances.

16. DO NOT use near curtains, plants, window

treatments, etc.

17. This appliance has a grounded three-prong plug

and is suitable for grounded receptacle use only.

An adapter is available for connecting three-blade

grounding-type plugs to two-slot receptacles. The

adapter must be properly grounded. DO NOT

attempt to defeat the purpose of this safely feature.

18. The rubber ring on this product may interact with

wood and cause damage to furniture. Do not place

on fine wood furniture.

Figure 1

This appliance is for household use only and may be

plugged into any 120-volt AC electrical outlet (ordinary

household current). DO NOT use any other type of outlet.

This unit is suitable for grounded receptacle use only.

The power cord has a grounded plug as shown in

Figure 1, and must be used with an electrical outlet that

can accommodate the grounding pin. If your electrical

outlet can not accommodate the grounding pin, then you

must purchase and install one of the two types of adapters

shown in Figure 2.

NOTE: The adapters ARE NOT supplied with this fan.

Read, follow, and save the instructions that are included

with the adapter you choose. Do not use an adapter if

your electrical outlet can accommodate the grounding pin.

LINE CORD SAFETY TIPS

1. NEVER pull or yank on the cord or the appliance.

2. To insert plug, grasp it rmly and guide it into the outlet.

3. To disconnect the appliance, grasp the plug and

remove it from the outlet.

4. Before each use, inspect the line cord for cuts and/

or abrasion marks. If any are found, the appliance

should be serviced and the line cord replaced. Please

return it to our Service Department or to an authorized

service representative.

5. NEVER wrap the cord tightly around the

appliance, as this could place undue stress on the

cord where it enters the appliance and could cause

it to fray and break.

6. DO NOT operate appliance if the line cord shows any

damage, if the appliance works intermittently or stops

working entirely.

Grounded

Plug

Grounding Pin

Grounded Outlet

Box Cover

WARNING

Figure 2

Grounded Outlet

Box Cover

Metal

Screw

Adapter

Grounding

Means

GROUNDING

BASE ASSEMBLY Figure 3

Figure 4

Figure 5

1. Insert the base weight into the base cover. Figure 3.

2. Insert the base of the telescoping pole into the top

of the base cover and attach to the base weight by

turning clockwise on the screw in the center of the

base weight. Figure 4.

3. Turn the base on its side and turn the handle of the

screw on the bottom of the weight until secure. Figure 5.

4. Tip the base back upright. Figure 6.

5. Grasp the telescoping pole firmly and twist the

adjustment knob counter clockwise to loosen. Figure 6.

6. Raise the inner pole and tighten the adjustment knob

by twisting clockwise until secure. Figure 6.

Figure 6

UNPACKING

As you unpack the fan, save the carton and packing

materials in case you want to move or ship the unit in the

future. Carefully remove all items from the box.

NOTE: It is best to have someone hold the box while

you lift the fan and the protective packaging out of the

carton. Make sure all shipping materials are removed

from fan before operating. Base Weight

Base Cover

Telescoping

Pole

Screw

Adjustment

Knob

Inner Pole

Screw

Figure 8

ATTACHING ASSEMBLY TO POLE

Figure 7

Motor Housing

Screw

Motor Housing

Screw

Telescoping

Pole

1. Remove the pre-installed motor housing screw from the

telescoping pole. Figure 7.

2. Secure the motor housing onto the telescoping pole,

making sure to lineup screw holes in the motor

housing pole and the telescoping pole. Insert and

tighten the motor housing screw. Figure 8.

Figure 9

Figure 10

Figure 11

Figure 12

GRILL ASSEMBLY

Post

Screw

1. Remove the plastic hub cap from the motor housing.

Figure 9.

2. Place the back grill against the motor housing, Figure

10., and line up the two black tabs on the front of

the motor housing.

Caution: Make sure the handle on the back of the back

grill is at the top.

3. Attach the back grill and secure it to the motor

housing with the plastic hub cap. Figure 11.

4. Loosen the pre-installed screw on the back of the fan

blade, and slide the fan blade onto the post on the

motor housing. Figure 12.

5. Retighten the screw on the back of the fan blade to

secure it to the motor housing. Figure 12.

Back Grill

Fan Blade

Plastic Hub Cap

Handle

Plastic Hub Cap

Motor Housing

Caution: Ensure when tightening the screw on the

back of the fan blade, you tighten it on the flat part

of the post.

Figure 14

Figure 13

Figure 15

GRILL ASSEMBLY (CONT.)

Front Grill

Hunter Logo

Grill

Ring

Screw

Ring Cover

Back Grill

Figure 16

Cord Clip

Cord

Notch

6. Remove the grill ring from the front grill by loosening

the screw holding it.

7. Place the front grill against the back grill so that the

Hunter logo faces right side up and push together

until the tabs on the grills hold them together. Figure 13.

8. Slide the grill ring over both front and back grills

turning the ring so that the screw that secures it, is on

the bottom. Figure 14.

9. Tighten the screw to secure the grill ring over both

the front and back grill. Place the ring cover over the

screw. Figure 15.

10. Straighten the cord from the motor housing along the

telescoping pole and snap the cord clip over the cord

onto the pole so that the cord rests in the notch on the

clip. Figure 16.

Figure 17

High

Medium

Low

Off

Figure 18

Figure 19

OPERATION

To turn the fan on and off or to control the speed, turn the

speed knob on the top of the motor housing to the proper

setting. Figure 17.

Off / Speed Selection

Oscillation

To allow the fan to oscillate, push the knob beside the fan

speed control down. Pull up on the knob if oscillation is

not desired. Figure 18.

Adjustment

To adjust the angle the fan is blowing.

1. Loosen the adjustment knob under the fan motor.

Figure 19.

2. Adjust the fan to the angle desired and retighten the

knob to secure the fan at that angle. .

When adjusting the height of the fan, always grip the

pole above the adjustment knob firmly to prevent the

telescoping pole from collapsing.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Hunter Ventilateur

Hunter

Hunter 21345 Manuel

Hunter

Hunter 21538 Mode d’emploi

Hunter

Hunter 59397 Manuel utilisateur

Hunter

Hunter Sona 83007 Manuel utilisateur

Hunter

Hunter 20406 Manuel

Hunter

Hunter 20406 Manuel utilisateur

Hunter

Hunter 21543 Manuel

Hunter

Hunter Westover Manuel d'instructions

Hunter

Hunter Nomad Manuel utilisateur

Hunter

Hunter Antero 52128 Manuel utilisateur

Hunter

Hunter 42700 Manuel utilisateur

Hunter

Hunter 21591 Manuel

Hunter

Hunter 28425 Manuel

Hunter

Hunter 22388 Manuel utilisateur

Hunter

Hunter 20345 Manuel utilisateur

Hunter

Hunter 42616-01 Manuel utilisateur

Hunter

Hunter 20171 Manuel d'instructions

Hunter

Hunter 42625-01 Manuel utilisateur

Hunter

Hunter 28673 Mode d’emploi

Hunter

Hunter 21732 Manuel

Hunter

Hunter Timpani Manuel utilisateur

Hunter

Hunter 22459 Manuel

Hunter

Hunter Hunter Ceiling Fan Manuel utilisateur

Hunter

Hunter 41343-01 Manuel d'instructions

Manuels Ventilateur populaires d'autres marques

ELTA FANS

ELTA FANS H03VV-F Manuel utilisateur

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manuel utilisateur

Panasonic

Panasonic FV-15NLFS1 Manuel utilisateur

Kompernass

Kompernass KH 1150 Manuel utilisateur

VES

VES FALA100/12V/TR Manuel utilisateur

Vertiv

Vertiv Liebert DCD Manuel utilisateur

Westinghouse

Westinghouse GFP Series Manuel utilisateur

Venmar

Venmar KUBIX HRV PLUS Series Manuel utilisateur

Maico

Maico ECR 31 Manuel utilisateur

Sonnenkonig

Sonnenkonig Dinky Manuel utilisateur

S&P

S&P ECOWATT HXBR Manuel utilisateur

Wider

Wider IMP03369BH Manuel utilisateur

Panasonic

Panasonic F-60DHN Manuel utilisateur

Hinkley

Hinkley HIGHLAND Manuel utilisateur

Broan

Broan 766BN Manuel utilisateur

Premium

Premium PFS16022 Instructions de montage

Litex Industries

Litex Industries E-CGL52CB5C1 Manuel utilisateur

Lindab

Lindab LTDF Manuel utilisateur