Hunter ECO LOGIC Manuel utilisateur

Table des matières

Autres manuels Hunter Contrôleurs

Hunter

Hunter X-CORE Manuel utilisateur

Hunter

Hunter Pro-C PCM-1600 Manuel utilisateur

Hunter

Hunter NODE-100 Manuel utilisateur

Hunter

Hunter WVC-100 Instructions originales

Hunter

Hunter NODE-100 Mode d'emploi

Hunter

Hunter XC Mode d'emploi

Hunter

Hunter Pro-C Manuel utilisateur

Hunter

Hunter IC600SS Manuel utilisateur

Hunter

Hunter WVC Mode d'emploi

Hunter

Hunter PRO-C P2C Series Mode d'emploi

Hunter

Hunter X-CORE Mode d'emploi

Hunter

Hunter Pro-C Mode d'emploi

Hunter

Hunter Node Manuel utilisateur

Hunter

Hunter i-core IC-600PL Mode d'emploi

Hunter

Hunter PSC-Z Series Mode d'emploi

Hunter

Hunter VSX Manuel utilisateur

Hunter

Hunter Smart Valve Controller Mode d'emploi

Hunter

Hunter XC Hybrid Mode d'emploi

Hunter

Hunter ICC Series Manuel utilisateur

Hunter

Hunter Hydrawise HCC-FPUP Manuel utilisateur

Hunter

Hunter X-CORE XC-2 Manuel utilisateur

Hunter

Hunter NODE-BT Manuel utilisateur

Hunter

Hunter Hydrawise HC-1200M Manuel utilisateur

Hunter

Hunter ACC2 Manuel d'installation

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur

Instructions AWS –Hunter model

How to use the eco-logic controller

•Use the mode button to advance through the programming functions.

•Use the arrows to move about the different fields within a function and the plus and minus

button to change the value that's currently flashing.

•The PRG button is used to advance from program A to program B and program C.

Set the current date and time

•Press the mode button on and the year will start flashing

•Use the left and right arrow buttons to scroll through the different choices. Tapping the right

arrow button once will show the month.

•Use the minus and plus button to change to the current month.

•Use the right arrow button to sellect the correct day.

•By tapping the plus (+) button you can switch to a.m./p.m. or 24-hour mode.

•When you come back to the years that’s a complete cycle. You can use the mode button to

go back to the home screen, which shows the current timer.

Set the automatic water refreshment

A program is a group of stations that share the same watering schedule. By schedule we mean

watering days of the week on which the program will run as well as the number of times the program

will cycle per watering day. If all your stations will be watering in the same days and the same

number of times a day then you can program all your stations in the same program, which we

strongly advice.

•You can start by programming 3 different start times for program A.

•Press the mode button until the arrow is flashing next to start times. It shows start time one

of program A.

•We advise 3 starting times for example 9.30, 13.00 and 16.30 hours (most common).

•We're going to set the first start time at 9.30 a.m. Then use the plus (+) button to set the

second time which is 13.00 and then use the plus (+) button again to set the third starting

time which is 16.30.

•We advise 2 minutes run time each for a fishtank and 5 minutes each for a fish unit.

•The fourth potential starting time can be left OFF.

•Keep in mind that the time is depending on the water hardness and the water pressure. If

you have any doubts about the starting times, don’t hestitate to contact us. We are happy to

help you with choosing the optimal settings for your store.

Set runtimes for each of the stations

•Press the mode button until the arrow is flashing next to run time.

•For station 1 you can program 2 minutes. Use the right arrow to go to station 2 to also

program 2 minutes. Use the right arrow to go to station 3 and do the same.

How to set the day for the (automatic) water change

•Press the mode button until the arrow is pointing next to watering days. Program it to water

every day.

•To activate a day, press the plus (+) button and it will switch to the following day. Do this till

you have finished it for the whole week. When you have set all days of the week you will

return to Monday (flashing). Now you’re ready to start with the Automatic Watering System.