Human Touch IJoy-100 Manuel utilisateur

Table des matières

Autres manuels Human Touch masseur

Human Touch

Human Touch ht 149 Manuel utilisateur

Human Touch

Human Touch HT-102 Manuel utilisateur

Human Touch

Human Touch AcuTouch 840 Manuel utilisateur

Human Touch

Human Touch Novo XT2 Manuel utilisateur

Human Touch

Human Touch REFLEX SWING Pro Manuel utilisateur

Human Touch

Human Touch ht103 Manuel utilisateur

Human Touch

Human Touch ThermoStretch HT-7120 Manuel utilisateur

Human Touch

Human Touch Acuvibe ht1260 Manuel utilisateur

Human Touch

Human Touch GRAVIS ZG Manuel utilisateur

Human Touch

Human Touch SANA Manuel utilisateur

Human Touch

Human Touch Novo XT Manuel utilisateur

Human Touch

Human Touch iJoy250 Manuel utilisateur

Human Touch

Human Touch iJoy Manuel utilisateur

Human Touch

Human Touch iJoy Manuel utilisateur

Human Touch

Human Touch AcuTouch 8.0 Manuel utilisateur

Human Touch

Human Touch AcuTouch 6.0 Manuel utilisateur

Human Touch

Human Touch ht103 Manuel utilisateur

Human Touch

Human Touch ht 135 Manuel utilisateur

Human Touch

Human Touch HT-1650 Manuel utilisateur

Human Touch

Human Touch HT-1470 Manuel utilisateur

Human Touch

Human Touch Serenity Plus PC 086 Manuel utilisateur

Human Touch

Human Touch Manhattan Manuel utilisateur

Human Touch

Human Touch HT-Navitas Ascent Series Manuel utilisateur

Human Touch

Human Touch HT-100 Manuel utilisateur

Manuels masseur populaires d'autres marques

ELEEELS

ELEEELS P2 Manuel utilisateur

Cenocco

Cenocco CC-9111 Manuel utilisateur

Panasonic

Panasonic EP790-C1 Manuel utilisateur

Adler

Adler AD 2167 Manuel utilisateur

Taurus

Taurus Wellness TW-MC-M Manuel utilisateur

Infinity

Infinity Syner-D Circadian Manuel utilisateur

Hydas

Hydas LH-095 Manuel utilisateur

AEG

AEG FM 5567 Manuel utilisateur

OBH Nordica

OBH Nordica Shiatus Tunes Manuel utilisateur

Hutech

Hutech Q9 Manuel utilisateur

Medisana

Medisana MM 825 Manuel utilisateur

SOLAC

SOLAC Therma Hydro Manuel utilisateur

Invacare

Invacare Texas Manuel utilisateur

Casada

Casada Bismarck II Manuel utilisateur

Fujiiryoki

Fujiiryoki Cyber-Relax EC-1700 Manuel utilisateur

Medisana

Medisana HM 886 Manuel utilisateur

HoMedics

HoMedics BA-C200 Manuel utilisateur

Repose

Repose Lynton Manuel utilisateur

Human Touch Confidential Page 1

JJHuman Touch iJoy-100 Replacing the Main PCB

Initiator: MG Replaces: 07/22/03 Revision date: 08/24/2006

Title: Replacement of the iJoy Main PCB Module

Purpose: To provide end users with the procedure for replacement of the iJoy’s Main Control Board PCB

module assembly.

Tools/Parts Required: Phillips Screwdriver, diagonal cutters, (Paper Clip or needle Nose Pliers)

Requires Main PCB Module

Procedure:

1) TURN OFF AND UNPLUG YOUR iJoy FROM AC WALL OUTLET

2) Carefully tip your chair onto its Right Side (the side opposite the AC

cord). NOTE: Your Model may vary in appearance from the model

shown.

3) Locate the zippered flap underneath the iJoy. Unzip the zipper to reveal

the inside cavity of the seat assembly. If the zipper does not have a Pull

Tab, insert a Paper Clip through the pull hole as a temporary tab.

4) Remove the four screws securing the Main PCB Module to the frame of

the chair. The Main PCB Module (case) will be white or black depending

on your model. While supporting the weight of the Main PCB Module,

carefully move it out from the cavity of the chair.

5) Disconnect the Three (3) white plugs leading to the Main PCB Module.

You may need to cut cable/zip ties that are securing the cables. Take

care not to cut the wires. In some cases, you may also need to remove

hot melt glue from the connectors. This may be carefully removed with

the blade of a screwdriver, or by hand.

6) Remove the Main PCB Module from the seat cavity and set aside for

return to Human Touch.

7) Place the new Main PCB Module in position and replace the four (4)

screws removed in step 5.

8) Reconnect the Three (3) white plugs removed in step 5.

9) Close the zippered bottom flap, and place the iJoy upright.

10) Plug the iJoy back into the wall outlet, and turn the Main Power Switch

on.

11) Test the chair for proper operation.

Human Touch Confidential Page 2

Title: Replacement of the iJoy Main PCB Module

PCB

Module

IJoy on its Right Side

Bottom cover open

Bottom

Cover

Four

Screws

Detail insert of Zipper

with no tab

Four screws securing Main

PCB module to frame

Three cable connectors

Main

PCB

Module

Zipper

Main PCB

Module