Human Touch HT-9200 Guide de configuration

X1103

October 17, 2010

REMOVING THE FOOT-AND-CALF MASSAGER

1. Using two people, gently tip the chair onto its side (Fig.1).

2. Use the remote control to deploy the foot-and-calf massager until the connector box becomes

accessible (about 75% full deployment) (Fig.2).

3. Power off the chair, then unplug it.

4. Using a nail clipper or other suitable instrument, cut the zip ties that secure the connector box

to the chair frame (Fig.2).

5. Using a Phillips-head screwdriver, remove the four screws that secure the connector box cover,

then remove the cover (Fig.3).

6. Disconnect the connectors (Fig.4)

7. Using a nail clippers or any other suitable instrument, cut the zip-tie that secures the massager harness

to the frame (Fig.5).

Tools Required: Phillips-head screwdriver, nail clippers or other instrument suitable for cutting zip ties, new zip ties. NOTE: SAVE ALL SCREWS FOR USE DURING REASSEMBLY.

REPLACING THE FOOT-AND-CALF MASSAGER

HT-820/9200

It is imperative that Human Touch® products are repaired in a manner that ensures product safety and regulatory compliance and that is fully consistent with the practices used

during the manufacturing process. Therefore, Human Touch requires that all product repairs are performed using only factory-new parts and in accordance with these repair

instructions. Failure to adhere to these instructions voids the product warranty and releases Human Touch from all liability for injury or product damage resulting from the repair.

SERVICE LEVEL: 3

(Fig.1)

Zip ties (Fig.2)

Connector box

(Fig.3)

Connectors

(Fig.4)

Zip-tie

(Fig.5)

8. Locate the two screws located inside the foot-and-calf massager’s rubber housing and remove them (Fig.6).

9. Using a Phillips-head screwdriver, remove the two screws that secure the fabric strip that holds the rubber housing in place, then remove the fabric strip (Fig.7).

10. Locate the five Phillips-head screws that secure the opposite side of the fabric strip that holds the rubber housing in place, then remove the screws and strip (Fig.8).

11. Using a Phillips-head screwdriver, remove the two screws that secure the two fabric strips that secure the foot-and-calf massager to the frame (Fig.9).

12. Pull the foot-and-calf massager forward to remove it from the chair (Fig.10).

(Fig.6)

Fabric strip

(Fig.7)

(Fig.8) (Fig.9) (Fig.10)

Foot-and-calf massager

Foot-and-calf

massager

INSTALLING THE FOOT-AND-CALF MASSAGER

1. Place the foot and calf massager into position on the frame.

2. Place the fabric strip that secures the foot-and-calf massager to the frame into position, then secure it using two Phillips-head screws (Fig.11).

3. Place the fabric strip that secures the top rubber housing into position then secure it using Five Phillips-head screws (Fig.12).

4. Place the fabric strip that secure the bottom rubber housing into position then secure it using two Phillips-head screws (Fig.13).

5. Replace the two screws inside the open slot in the rubber housing.

6. On the underside of the chair, reconnect the connectors.

7. Using the zip-tie, secure the calf massager harness to the frame (Fig.14).

8. Place the connectors into position inside the connector junction box (Fig.15), replace the junction box cover, then replace the four screws

to secure it (Fig.16).

9. Use a new zip tie to secure the connector box to the chair frame (Fig.17).

10. Using two people, gently return the chair to an upright position.

11. Plug in the chair, power it on, then verify that the new foot and calf massager is working properly.

(Fig.11)

Foot-and-calf

massager

(Fig.12)

Fabric strip

(Fig.13)

(Fig.15) (Fig.16)

Zip ties

(Fig.17)

Connector box

Connectors

Please send any questions or comments regarding these instructions to: [email protected]

Zip-tie

(Fig.14)

Autres manuels pour HT-9200

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Human Touch masseur

Human Touch

Human Touch feel better HT-245PS Manuel utilisateur

Human Touch

Human Touch AcuTouch 6.1 Manuel utilisateur

Human Touch

Human Touch NOVO Manuel utilisateur

Human Touch

Human Touch HT-5270 Manuel utilisateur

Human Touch

Human Touch ThermoStretch HT-7120 Manuel utilisateur

Human Touch

Human Touch pc 085 Manuel utilisateur

Human Touch

Human Touch HT-100 Manuel utilisateur

Human Touch

Human Touch ZeroG 3.0 Manuel utilisateur

Human Touch

Human Touch Novo XT2 Manuel utilisateur

Human Touch

Human Touch ht 7450 Manuel utilisateur

Human Touch

Human Touch IJOY HT-2720 Manuel utilisateur

Human Touch

Human Touch ZeroG Volito Manuel utilisateur

Human Touch

Human Touch HT-1650 Manuel utilisateur

Human Touch

Human Touch REFLEX POPUP Manuel utilisateur

Human Touch

Human Touch HT-270 Manuel utilisateur

Human Touch

Human Touch NOVO Manuel utilisateur

Human Touch

Human Touch HT-9200 Manuel utilisateur

Human Touch

Human Touch Novo XT Manuel utilisateur

Human Touch

Human Touch ht103 Manuel utilisateur

Human Touch

Human Touch CITYclub ht3010 Manuel utilisateur

Human Touch

Human Touch HT-Reflex 4 Manuel utilisateur

Human Touch

Human Touch HT-270 Manuel utilisateur

Human Touch

Human Touch iJoy Manuel utilisateur

Human Touch

Human Touch WholeBody 5.1 Manuel utilisateur

Manuels masseur populaires d'autres marques

ELEEELS

ELEEELS P2 Manuel utilisateur

Cenocco

Cenocco CC-9111 Manuel utilisateur

Panasonic

Panasonic EP790-C1 Manuel utilisateur

Adler

Adler AD 2167 Manuel utilisateur

Taurus

Taurus Wellness TW-MC-M Manuel utilisateur

Infinity

Infinity Syner-D Circadian Manuel utilisateur

Hydas

Hydas LH-095 Manuel utilisateur

AEG

AEG FM 5567 Manuel utilisateur

OBH Nordica

OBH Nordica Shiatus Tunes Manuel utilisateur

Hutech

Hutech Q9 Manuel utilisateur

Medisana

Medisana MM 825 Manuel utilisateur

SOLAC

SOLAC Therma Hydro Manuel utilisateur

Invacare

Invacare Texas Manuel utilisateur

Casada

Casada Bismarck II Manuel utilisateur

Fujiiryoki

Fujiiryoki Cyber-Relax EC-1700 Manuel utilisateur

Medisana

Medisana HM 886 Manuel utilisateur

HoMedics

HoMedics BA-C200 Manuel utilisateur

Repose

Repose Lynton Manuel utilisateur