Huawei B882 Manuel utilisateur
4G LTE Huawei B882 Turbo Hub
Getting Started Guide
1
Thank You for Purchasing the Turbo Hub!
Before You Begin
What’s in the Box :
1. Turbo Hub
2. Power adapter
3. 1 Ethernet cable (Yellow)
4. 1 Telephone cable
5. Getting Started Guide
6. Safety Information Guide
7. Warranty Information Guide
If anything is missing or damaged, return the entire package to your point of
purchase.
2
1Getting Started: Setting up Your
Turbo Hub
Follow these simple steps to setup your Turbo Hub.
Place the Turbo Hub at an indoor open area or close to a window if possible.
Obstructions such as concrete or wooden walls may affect the transmission of
wireless signals.
Keep the Turbo Hub away from the household electrical appliances that produce
strong electric or magnetic fields, such as microwaves, refrigerators, or satellite
dish antennas.
Step 1Insert SIM card into the Turbo Hub’s SIM Card Slot.
If your SIM card was not activated and inserted into your Turbo Hub at your point
of purchase, please call Bell customer service at 1-800-667-0123 to activate it now.
Before removing the SIM card, ensure that Turbo Hub is powered off and
disconnected from the power outlet.
3
Step 2Connect the power adapter to the power port and plug into the wall
socket.
The Turbo Hub will power on automatically.
4
2Getting Started: Setting up an
Internet Connection
Connecting your devices (computer, laptop, tablet, etc.) to the Internet
You are able to connect to the Internet via a wired or wireless (Wi-Fi) connection.
Follow the instructions below to set up your connection of choice.
Wired Connection With an Ethernet Cable
Step 1Connect the Yellow Ethernet cable provided to one of the 3 LAN ports
and connect the other end to your computer.
Step 2Wait approximately 30 - 60 seconds for the connection to establish. Check
the indicators on the front panel of your Turbo Hub. If they are lit as
outlined you are ready to use the internet with your new Turbo Hub!
Do not connect the Yellow Ethernet cable to the WAN port that is closest to the
right hand side of the device.
5
Power
Solid White: the Turbo Hub is powered on.
Wireless Signal
indicator
Solid Blue or Cyan: the Turbo Hub is registered
with the wireless network.
If this indicator is red and blinking, power off the
Turbo Hub and ensure your SIM card is inserted
correctly.
If this continues after turning the Turbo Hub on
again, please contact Bell customer service at 1-
800-667-0123 to ensure your SIM card is
activated.
Wireless Dial-up
indicator
Solid: the Turbo Hub is connected to the wireless
network.
If this indicator is blinking continuously, power
off the Turbo Hub for 2 minutes and try again.
/ /
LAN indicators
Solid: 1, 2 or 3 will be lit depending on which
LAN port you are connected to.
Blinking: data is transferring.
6
Wireless (Wi-Fi) Connection
Follow these simple steps to connect up to 32 Wi-Fi enabled devices to the Internet
through your Turbo Hub:
Step 1Ensure that on the front panel is solid and Wi-Fi is enabled on your
device (computer, laptop, tablet, etc.).
Step 2From your device, scan for wireless networks in your area. Connect to the
network name that matches the Wi-Fi Name (SSID) found on the Wireless
Security Sticker.
Step 3When prompted for your wireless security settings, enter the Wi-Fi Password
listed on the Wireless Security Sticker (Wi-Fi Password is case sensitive).
Step 4Wait approximately 30 seconds for the connection to establish. Your Wi-Fi
enabled device will notify you when it is connected.
Step 5You may connect up to 32 Wi-Fi enabled devices. Repeat steps 1 through 4.
The Wi-Fi Name (SSID) and Wi-Fi Password (WIFI KEY) are printed on the
Wireless Security Sticker located on the bottom of your Turbo Hub.
To protect your wireless network from unauthorized access, change the Wi-Fi
Name (SSID) and Wi-Fi Password (WIFI KEY)
at regular intervals. For details, see
the online help information on the web user interface.
If you are using Windows Vista or later, you can press the WPS button on the top of
your Turbo Hub for 6 seconds in lieu of entering the Wi-Fi Password.
7
8
3Getting Started: Setting up Your
Phone
Follow these simple steps to connect a Phone to your Turbo Hub.
Step 1For voice calls, connect a standard telephone to the Telephone Port using
a RJ-11 cable (you will require a voice plan in addition to a data plan
to use this feature).
Step 2Check the indicators on the front panel of your Turbo Hub. At minimum the
indicators must be lit as outlined.
You are ready to make your first phone call on your new Turbo Hub! Refer to the
section “Using your Turbo Hub’s Phone Features” for more help on using a phone
with your Turbo Hub.
If the Turbo Hub is to be connected to the existing wall outlet telephone wiring, the
existing wiring MUST first be disconnected from any outside landline telephone
network. Not disconnecting from any outside landline telephone network will cause
excessive heat or even damage the Turbo Hub.
Autres manuels pour B882
2
Table des matières
Autres manuels Huawei Changer
Huawei
Huawei ACBox2000-21-D0-A-US Manuel utilisateur
Huawei
Huawei Enterprise S2700 Series Manuel utilisateur
Huawei
Huawei Quidway S3900 Series Manuel utilisateur
Huawei
Huawei Quidway S3000-EI Series Manuel utilisateur
Huawei
Huawei Quidway S5300 Series Manuel utilisateur
Huawei
Huawei Quidway S2008-EI Manuel utilisateur
Huawei
Huawei S1700 Series Manuel utilisateur
Huawei
Huawei Quidway S5600 Manuel utilisateur
Huawei
Huawei quidway s7700 Manuel utilisateur
Huawei
Huawei Quidway S9300 Manuel utilisateur
Huawei
Huawei Enterprise S2700 Series Manuel utilisateur
Huawei
Huawei S5700-LI Series Manuel utilisateur
Huawei
Huawei S2720 Series Mode d’emploi
Huawei
Huawei S7700 Series Manuel d'utilisation
Huawei
Huawei MA5821 Manuel utilisateur
Huawei
Huawei quidway s7700 Mode d’emploi
Huawei
Huawei S600-E Series Manuel utilisateur
Huawei
Huawei AR500 Manuel utilisateur
Huawei
Huawei Quidway S6506R Mode d’emploi
Huawei
Huawei B890 Guide de référence
