Huawei OceanStor VIS6300 Manuel utilisateur
HUAWEI TECHNOLOGIES Co., Ltd.
OceanStor VIS6000 Series
Virtual Intelligent Storage System V100R001
Quick Installation Guide
Issue: 03
Part Number: 3150G070
Date: 2010-05-10
1
Contents
Installation Environment 1
Material List 2
Installation Procedure 6
Taking Antistatic Measures 7
Installing the VIS6000 in the Cabinet 8
Connecting Grounding Cable 13
Connecting Storage Array and Application Server to
the VIS6000 14
Connecting the Production Center to the Disaster
Recovery Center 25
Connecting the VIS6000 to the Maintenance Terminal 28
Connecting Power Cable 33
Power on 35
Appendixes 38
2
Before installation, check whether the external environmental conditions, such as power supply and heat
dissipation, satisfy the requirements for normal running of the VIS6000.
Rated voltage: 220 V(AC); -48 V(DC)
Maximum AC input power: 900 W
Operating temperature: 5°C to 40°C (altitude: < 1800 m)
5°C to 35°C (altitude: 1800 m to 3000 m)
Operating altitude: ≤3000 m
Relative humidity: 5% RH to 85% RH
Installation Environment
The OceanStor virtual intelligent storage 6000 series virtual intelligent storage system (hereinafter
referred to as the VIS6000 ) includes two products: VIS6300 and VIS6600. The VIS6600 is superior to the
VIS6300 in hardware configuration and has more powerful capability of processing services. Unless
otherwise specified, this document takes the VIS6000 with the AC power as an example.
This document takes the VIS6000 that is installed to the N610E-22 cabinet as an example.
This document is based on the prerequisite that the N610E-22 cabinet is well installed and grounded.
Reserve the space of at least 100 cm between the cabinet and the wall and 120 cm between the cabinets
for the convenience of maintenance, ventilation, and heat dissipation.
Before installing the device into the cabinet, ensure that air in the cabinet exchanges with air in the
machine room. It is suggested to reserve the space of 1 U above the device and below the device.
N610E-22 Cabinet
3
The N610E-22 cabinet is equipped with a captive nut mount bar.
The material list includes grounding cables and power cables.
Material List
1 Tools
Cross screwdriver Flathead screwdriver Cutter
Captive nut mount bar
Antistatic gloves
Antistatic clothes
Cable tie Fiber binding strap
The plugged ESD-preventive
wrist strap for the grounding
terminal
4
The ESD-preventive wrist strap
with metallic clip for the
grounding terminal Installation template
Paste labels on the connected cables to fill in related information.
2 Cables
Network cable
Serial port cable (converting
RJ-45 to DB-9)
Optical fiber
3 Other Devices
FC switch (take the Brocade 200E fiber channel switch as an example)
Ethernet switch (take the HUAWEI Quidway S5600 series as an example)
Application server (take DELL PowerEdge 2950 as an example) Maintenance terminal
5
The VIS6000 supports Gigabit Ethernet (GE) port modules and Fiber Channel (FC) port modules.
With full configuration, the VIS6000 can be configured with six port modules:
●Two FC port modules + four GE port modules
●Four FC port modules + two GE port modules
●Six GE port modules
The VIS6000 provides ten interface cards with five on each side. The interface cards are numbered. The
numbers are 0, 1, 2, 3, and 4 from top to bottom. The interface cards that are numbered 0, 1, and 2 are
used for carrying port modules. The interface cards that are numbered 3 and 4 are used for carrying
system disks.
The FC port module and GE port module can be installed in the slots of the interface card without
restriction. The FC port module or the GE port module can be installed in slot 0,1, or 2.
According to the actual application environment choose the types and numbers of port modules. If the
interface card does not carry port modules, use a filler panel to hide the interface card. The controller A
and B must carry port modules in the same mode. The sequence of port modules on each side in the
VIS6000 must be consistent. In this way, the 1+1 redundant backup can be achieved.
4 VIS6000
Front view of the VIS6000 (take the front view of the
VIS6600 with a baffle as an example)
Side view of the VIS6000 (without the baffle)
Controller reset button Controller b
System debugging serial port BMC adebugging serial port
Power module
Configuration network port
a: baseboard management controller (BMC)
b: In the front view of the VIS6000, the upper controller is controller A and the lower controller is controller B.
System subrack handle
Front view of the VIS6000 (AC, without the baffle) Front view of the VIS6000 (DC, without the baffle)
6
Rear view of the VIS6000 (AC，four FC port modules+two
GE port modules)
Rear view of the VIS6000 (AC，two FC port modules+four
GE port modules)
Rear view of the VIS6000 (DC，two FC port modules+four
GE port modules)
Rear view of the VIS6000 (AC，six GE port modules)
System disk box
Fan module API cmodule
FC port module
GE port module
FC service port
Management port module b
GE service port
System disk
Hot-swap control button a
a：The hot-swap control buttons on the GE port module and the FC port module are reserved. The current version does not
support the use of the button. Do not perform any operation on the button; otherwise, system services might be disrupted.
b：The management port module provides two management network ports and one mute alarm button. The left network port
on the management port module belongs to controller A, and the right network port belongs to controller B.
c：AC power interface (API).
d：DC power interface (DPI).
DPI dmodule
7
The following section takes the installation of the VIS6000 ( two FC port modules + four GE port modules)
in the N610E-22 cabinet as an example.
Installation Procedure
Start
Take antistatic measures
Install the VIS6000 in the cabinet
Install the VIS6000 in the cabinet
Connect the grounding cable
Connect the storage array and application server to the VIS6000
Connect the production center to the disaster recovery center
Connect the VIS6000 to the maintenance terminal
Connect power cable
Power on the devices
End
8
When wearing an ESD-preventive wrist strap, for the plugged ESD-preventive wrist strap, insert the wrist
strap into the ESD plug of the cabinet. For the ESD-preventive wrist strap with metallic clip, you can clip
the ESD-preventive wrist strap with metallic clip to the cabinet directly.
1 Wearing an Antistatic Wrist Strap
2 Wearing Antistatic
Clothes 3 Wearing Antistatic
Gloves
Scenario 1: Wearing an
Antistatic Wrist Strap (Plugged) Scenario 2: Wearing an Antistatic
Wrist Strap (With Metallic Clip)
Taking Antistatic Measures
9
a
If not specified, the VIS6000 in this document refers to the
VIS6000 in the production center.
The table lists the device positions in the cabinet. Install
the VIS6000 and other devices based on the actual
environment.
Install the VIS6000 at the bottom of the cabinet for the
convenience of ventilation and heat dissipation of VIS6000
components.
1 Specifying the Position of
the VIS6000 in the Cabinet
aLocate the VIS6000
Installing the VIS6000 in the Cabinet
▲
Filler panel (2U)
■
▲
●
■
▲
●
■
▲
●
■
▲
AC power distribution box (3U)
VIS6000 (4U)
▲
▲
▲
▲
▲
▲:Filler panel (1U)
■:Other devices (1U)
●:Cabling subrack (1U)
Storage devices (4U)
Storage devices (4U)
Storage devices (4U)
Storage devices (4U)
Filler panel (4U)
Filler panel (4U)
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Huawei Stockage
Huawei
Huawei FusionModule1000A20 Manuel utilisateur
Huawei
Huawei E3131s Guide d'installation
Huawei
Huawei OceanStor 5110F V5 Manuel utilisateur
Huawei
Huawei OceanStor CloudStor CSE Manuel utilisateur
Huawei
Huawei FusionDC1000A Manuel utilisateur
Huawei
Huawei IDS1000-A Manuel d'utilisation
Huawei
Huawei FusionModule1000A Manuel utilisateur
Huawei
Huawei OceanStor V5 Series Manuel d'utilisation et d'entretien
Huawei
Huawei Quidway S5000 Series Instructions d'utilisation
Huawei
Huawei ES3000 V3 Manuel utilisateur
Huawei
Huawei OceanStor V3 Series Manuel utilisateur
Huawei
Huawei EC821 Manuel utilisateur
Huawei
Huawei N2000H V3 Manuel utilisateur
Huawei
Huawei FusionDC1000A Manuel utilisateur
Huawei
Huawei E600 Manuel utilisateur
Huawei
Huawei OceanStor S2600 Instructions d'utilisation
Huawei
Huawei OceanStor Dorado V3 Series Manuel d'utilisation et d'entretien
Huawei
Huawei FusionModule1000A20 Manuel d'utilisation
Huawei
Huawei FusionModule800 Manuel utilisateur
Huawei
Huawei OceanStor Dorado V3 Series Manuel utilisateur
Manuels Stockage populaires d'autres marques
Spectra Logic
Spectra Logic T-Series Spectra T50e Manuel utilisateur
Panasonic
Panasonic LKM-F931-1 Manuel utilisateur
Tabernus
Tabernus Enterprise Erase E2400 Manuel utilisateur
Rocstor
Rocstor COMMANDER 3F series Manuel utilisateur
HP
HP P9000 Manuel utilisateur
Western Digital
Western Digital Ultrastar Data60 Manuel utilisateur