Huawei P9 lite mini Manuel utilisateur
Quick Start Guide
9
P
1
Your device at a glance
Thank you for choosing a
HUAWEI P9 lite mini
smartphone.
Before you start, let's take a look at your new device.
•
To power on your device, press and hold the power
button until the screen turns on.
•
To power off your device, press and hold the power
button, and then touch .
To force your device to restart, press and hold the power
button until your device vibrates.
Headset jack Noise reduction
microphone
Flash
Camera
Fingerprint scanner
Earpiece
Volume button
Power button
Status indicator
Front camera
Light sensor
Micro USB port
Microphone Speaker
Card slot
2
Getting Started
Follow the instructions in the following figures to set up your
device.
• Do not insert or remove the SIM card when your
device is powered on.
• Ensure that the card is correctly aligned and that the
card tray is level when you insert it into your device.
Be careful not to scratch your device or hurt yourself
when using the eject pin. Store the eject pin out of the
reach of children to prevent accidental swallowing or
injury.
Caution
Do not use cut or modified SIM or microSD cards with
your device as these may not be recognized and could
damage the card tray.
microSD
Nano-SIM
3
For more information
If you encounter any problems while using your device, you
can obtain help from the following resources:
Log on to the official Huawei website. You can:
•
Visit http://consumer.huawei.com/en/ to download user
guides, view frequently asked questions and other
information.
•
Visit http://consumer.huawei.com/en/support/hotline for
the most up-to-date contact information for your
country or region.
Go to
Settings
and touch
About phone
>
Legal
information
to view legal information for your product.
Go to
Settings
and touch
About phone
>
Legal
information
>
Safety information
to view safety
information for your product.
Go to
Settings
and touch
About phone
>
Authentication info
to view regulatory information for your
product.
Go to
Settings
and touch
About phone
>
Certification
logos
to view more information on certification logos for
your product.
All pictures and illustrations in this guide, including but
not limited to the product color, size, and display
content, are for your reference only. The actual product
may vary. Nothing in this guide constitutes a warranty of
any kind, express or implied.
4
Safety Information
Please read all of the safety information carefully before
using your device to ensure its safe and proper operation and
to learn how to dispose of your device properly.
Operation and safety
•
To prevent possible hearing damage, do not
listen at high volume levels for long periods.
•
Using an unapproved or incompatible power adapter,
charger, or battery may damage your device, shorten its
lifespan, or cause a fire, explosion, or other hazards.
•
Ideal operating temperatures are 0°C to 35 °C. Ideal
storage temperatures are -20 °C to +45 °C.
•
Pacemaker manufacturers recommend that a minimum
distance of 15 cm be maintained between a device and a
pacemaker to prevent potential interference with the
pacemaker. If using a pacemaker, hold the device on the
side opposite the pacemaker and do not carry the device
in your front pocket.
•
Keep the device and the battery away from excessive
heat and direct sunlight. Do not place them on or in
heating devices, such as microwave ovens, stoves, or
radiators.
•
Observe local laws and regulations while using the
device. To reduce the risk of accidents, do not use your
wireless device while driving.
•
While flying in an aircraft or immediately before
boarding, only use your device according to instructions
5
provided. Use of a wireless device in an aircraft may
disrupt wireless networks, present a hazard to aircraft
operation, or be illegal.
•
To prevent damage to your device's parts or internal
circuits, do not use it in dusty, smoky, damp, or dirty
environments or near magnetic fields.
•
When charging the device, make sure the power adapter
is plugged into a socket near the devices and is easily
accessible.
•
Unplug the charger from electrical outlets and the device
when not in use.
•
Do not use, store or transport the device where
flammables or explosives are stored (in a gas station, oil
depot, or chemical plant, for example). Using your device
in these environments increases the risk of explosion or
fire.
•
Dispose of this device, the battery, and accessories
according to local regulations. They should not be
disposed of in normal household waste. Improper
battery use may lead to fire, explosion, or other hazards.
FCC Regulatory Compliance
Body worn operation
The device complies with RF specifications when used near
your ear or at a distance of 1.0 cm from your body. Ensure
that the device accessories, such as a device case and device
holster, are not composed of metal components. Keep the
device away from your body to meet the distance
requirement.
6
Certification information (SAR)
This device is also designed to meet the requirements for
exposure to radio waves established by the Federal
Communications Commission (USA).
The SAR limit adopted by the USA is 1.6 W/kg averaged over
one gram of tissue. The highest SAR value reported to the
FCC for this device type complies with this limit.
The highest SAR value reported to the FCC for this device
type when using at the ear is 0.86 W/kg, and when properly
worn on the body is 1.32 W/kg, and when using the Wi-Fi
hotspot function is 1.32 W/Kg.
FCC statement
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and
receiver.
--Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
7
--Consult the dealer or an experienced radio/TV technician
for help.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
Caution:
Any changes or modifications to this device not
expressly approved by Huawei Technologies Co., Ltd. for
compliance could void the user's authority to operate the
equipment.
8
Legal Notice
Trademarks and Permissions
, , and are trademarks or registered
trademarks of Huawei Technologies Co., Ltd.
Android™ is a trademark of Google Inc.
LTE is a trademark of ETSI.
The
Bluetooth
®
word mark and logos are registered
trademarks owned by
Bluetooth SIG, Inc.
and any use of such
marks by Huawei Technologies Co., Ltd. is under license.
Wi-Fi
®
, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are
trademarks of Wi-Fi Alliance.
Privacy Policy
To better understand how we protect your personal
information, please see the privacy policy at
http://consumer.huawei.com/privacy-policy.
Copyright © Huawei Technologies Co., Ltd.
2017. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY,
AND DOES NOT CONSTITUTE ANY KIND OF WARRANTIES.
6012699_01
Please visit
http://consumer.huawei.com/en/support/hotline/ for
recently updated hotline and email address in your
country or region.
Note: Remember the Google account your phone
last logged in to. During an untrusted factory
settings restoration or microSD card–based update,
Google's anti-theft mechanism requires you to
enter the Google account your phone last logged
in to on the startup navigation screen for identity
authentication. Your phone can properly power on
only after the identity authentication passes.
Model: SLA-L03
Autres manuels pour P9 lite mini
1
Table des matières
Autres manuels Huawei Téléphone portable
Huawei
Huawei P8 lite Manuel utilisateur
Huawei
Huawei Nova 5T Manuel utilisateur
Huawei
Huawei CherryPlus Dimensions
Huawei
Huawei Ascend XT2 Manuel utilisateur
Huawei
Huawei U2800A Manuel utilisateur
Huawei
Huawei Ascend W1 Manuel utilisateur
Huawei
Huawei LDN-L21 Manuel utilisateur
Huawei
Huawei CDY-NX9B Manuel utilisateur
Huawei
Huawei P8 lite Manuel utilisateur
Huawei
Huawei Ascend Y300 Manuel utilisateur
Huawei
Huawei C2856 Manuel utilisateur
Huawei
Huawei Ascend Y H866C Manuel utilisateur
Huawei
Huawei P10 PLUS Manuel utilisateur
Huawei
Huawei CET-LX9 Manuel utilisateur
Huawei
Huawei SLA-L23 Manuel utilisateur
Huawei
Huawei TRT-L21 Manuel utilisateur
Huawei
Huawei CM980 Manuel utilisateur
Huawei
Huawei Ascend Y 201 Pro Manuel utilisateur
Huawei
Huawei Ascend Y5 Manuel utilisateur
Huawei
Huawei P8 lite Manuel utilisateur
