HP Aruba Instant On 1830 Instructions d'installation
MF877-00 Page 1
Template Revision A
HPE instructions for this template are available at MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Networking Equipment
Marketing Name / Model
[List multiple models if applicable.]
HPE Aruba Instant On 1830 48G 4SFP 370W 24p Class4 PoE Switch (JL815A)
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HPE products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
3
Batteries
All types including standard alkaline and lithium coin
or button style batteries
0
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Includes background illuminated displays with gas
discharge lamps
0
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB/PCT)
0
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
on PSU PCB Board
5
External electrical cables and cords
Power Cord
1
Gas Discharge Lamps
0
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations
0
Components and waste containing asbestos
0
Components, parts and materials containing
refractory ceramic fibers
0
Components, parts and materials containing
radioactive substances
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
MF877-00 Page 2
Template Revision A
HPE instructions for this template are available at MF877-01
Tool Description
Tool Size (if
applicable)
Phillips Screwdriver
P2
Diagonal Pliers
5”
Hexagonal Socket Screwdriver
#5
Plat Screwdriver
4mm
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Using a P2 Phillips Screwdriver, remove all 12 screws securing top cover to chassis. Remove Cover. (see 3.2.1)
2. Using a P2 Phillips Screwdriver, remove 9 screws to chassis, remove Air baffle (3pcs). (see 3.2.2)
3. Using Diagonal Plier to cut 1 cable tie on chassis and Disconnect Power supply and main board cable connections (3 cables
connections in all), remove Power supply and insulator (1pcs). (see 3.2.3)
4. Using a P2 Phillips Screwdriver, remove 8 screws to chassis, remove PoE board and insulator (1pcs), remove SFP heat sink,
remove cable tie. (see 3.2.4)
5. Disconnect Fan and main board 2 cables connection and Using a P2 Phillips Screwdriver, remove 4 screws to chassis, remove
Fan(2pcs) (see 3.2.5)
6. Using a P2 Phillips Screwdriver, remove 7 screws to chassis, using a #5 Hexagonal socket Screwdriver, remove 7 standoffs to
chassis, remove main board (1pcs). (see 3.2.6)
7. Using Diagonal Plier to cut 1 cable tie on rear plane, Using Flat Screwdriver push the hooks on the sides of AC-inlet Socket, and
Using a P2 Phillips Screwdriver, remove 1 screws to chassis and Disconnect ac-inlet cable (see 3.2.7)
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the
product that require selective treatment (with descriptions and arrows identifying locations).
3.2.1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels HP Changer
HP
HP Officejet Pro 7500 Series Manuel utilisateur
HP
HP StorageWorks 2/140 - Director Switch Mode d’emploi
HP
HP StorageWorks 2/140 - Director Switch Manuel utilisateur
HP
HP StorageWorks 2/140 - Director Switch Mode d’emploi
HP
HP 11757B Manuel d'utilisation et d'entretien
HP
HP ProCurve 5400zl Series Manuel
HP
HP 6125G Manuel d'installation
HP
HP ProCurve Switch 2650 Manuel
HP
HP OfficeConnect 1820 8G Manuel utilisateur
HP
HP 6125G Manuel utilisateur
HP
HP Compaq Presario,Presario 1910 Instructions d'utilisation
HP
HP A3724A - SureStore E Hub S10 Manuel utilisateur
HP
HP 5500 EI series Manuel utilisateur
HP
HP ProCurve 9408sl Manuel utilisateur
HP
HP A5120 EI Series Manuel d'installation
HP
HP 316095-B21 - StorageWorks Edge Switch 2/24 Manuel utilisateur
HP
HP zl Manuel utilisateur
HP
HP Voltaire Grid Director 4036 IB 4X QDR 36P... Manuel de l'opérateur
HP
HP NJ2000 Manuel utilisateur
HP
HP StorageWorks 2/16 - SAN Switch Mode d’emploi
