HP Aruba 4100i Instructions d'installation

MF877-00 Page 1

Template Revision C, 30-July-2018

HPE instructions for this template are available at MF877-01

Product End-of-Life Disassembly Instructions

Product Category: Networking

Marketing Name / Model

[List multiple models if applicable.]

HPE Aruba 4100i 24G CL4/6 POE 4SFP+ Sw (JL818A)

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions

for the disassembly of HPE products to remove components and materials requiring selective treatment, as defined by

Directive 2012/19/EU of the European Parliament and of the Council on Waste Electrical and Electronic Equipment

(WEEE).

1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment.

1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as

applicable.

Item Description

Notes

Quantity

of items

included

in product

Printed Circuit Boards (PCB) or Printed Circuit

Assemblies (PCA)

With a surface greater than 10 sq cm

Batteries

All types including standard alkaline and lithium

coin or button style batteries

Mercury-containing components

For example, mercury in lamps, display backlights,

scanner lamps, switches, batteries

Liquid Crystal Displays (LCD) with a surface

greater than 100 sq cm

Includes background illuminated displays with gas

discharge lamps

Cathode Ray Tubes (CRT)

Capacitors / condensers (Containing PCB/PCT)

1544

Electrolytic Capacitors / Condensers measuring

greater than 2.5 cm in diameter or height

External electrical cables and cords

Gas Discharge Lamps

Plastics containing Brominated Flame Retardants

weighing > 25 grams (not including PCBs or PCAs

already listed as a separate item above)

Components and parts containing toner and ink,

including liquids, semi-liquids (gel/paste) and toner

Include the cartridges, print heads, tubes, vent

chambers, and service stations.

Components and waste containing asbestos

MF877-00 Page 2

Template Revision C, 30-July-2018

HPE instructions for this template are available at MF877-01

Item Description

Notes

Quantity

of items

included

in product

Components, parts and materials containing

refractory ceramic fibers

Components, parts and materials containing

radioactive substances

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components

and materials requiring selective treatment can be removed.

Tool Description

Tool Size (if

applicable)

Phillips screwdriver #2

Hexagon screwdriver

Phillips screwdriver #1

M3 M2

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

1. Remove the Plastic Protectors cover, and terminal conn.

1. Using a Phillips screwdriver #2, remove the screws attaching the terminal

2. Remove the M4 screws on both sides

1. Using a Phillips screwdriver, remove the screws attaching the M4 screws on both sides 16PCS

3. Remove the top cover

1. Using a Phillips screwdriver #1, remove the screws attaching the top cover side 10pcs.

2. Using a Phillips screwdriver #1, remove the screws attaching the top cover right side 3pcs

3. Using a Phillips screwdriver #1, remove the screws attaching the top cover left side 3pcs

4. Using a Phillips screwdriver #1, remove the screws attaching the top cover back side 5pcs

5. Using a Phillips screwdriver #1, slightly loosen the screws attaching the top cover right side 4pcs

6. Using a Phillips screwdriver #1, slightly loosen the screws attaching the top cover left side 4pcs

7. Using a Phillips screwdriver #2, remove the screws attaching the heat sink top side 4pcs

8. Lift upward to remove cover the chassis. (heat sink together)

MF877-00 Page 3

Template Revision C, 30-July-2018

HPE instructions for this template are available at MF877-01

4. Remove the Led board

1. Remove led cable

2.Using a Phillips screwdriver #1, remove the screws attaching the led board 2pcs

5. Remove the riser bracket

1. Using a Phillips screwdriver #2, remove the screws attaching the riser bracket 3pcs

6. Remove the one power supplies

1. Disconnect AC inlet & main PCBA cable connections.

2. Using a Phillips screwdriver #2, remove the screws attaching the power.

7. Remove the main board PCBA assembly

1. Using a Phillips screwdriver #2, remove the screws attaching the PCBA.

8. Remove the main PCBA

9. 9-Finish

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items

contained in the product that require selective treatment (with descriptions and arrows identifying locations).

MF877-00 Page 4

Template Revision C, 30-July-2018

HPE instructions for this template are available at MF877-01

MF877-00 Page 5

Template Revision C, 30-July-2018

HPE instructions for this template are available at MF877-01

MF877-00 Page 6

Template Revision C, 30-July-2018

HPE instructions for this template are available at MF877-01

MF877-00 Page 7

Template Revision C, 30-July-2018

HPE instructions for this template are available at MF877-01

MF877-00 Page 8

Template Revision C, 30-July-2018

HPE instructions for this template are available at MF877-01

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HP Changer

HP ProCurve 3500-24 Manuel du propriétaire

HP ProCurve 5400zl Series Manuel utilisateur

HP ProCurve 1810G Manuel utilisateur

HP ProCurve 1600M Manuel utilisateur

HP 3500 Series Manuel de programmation

HP 445946-001 Guide de l'utilisateur

HP FlexFabric 5980 48SFP+6QSFP28 Manuel utilisateur

HP ProCurve 10Base-T 12 Manuel utilisateur

HP Compaq Presario,Presario 1910 Manuel utilisateur

HP V1810-48G Instructions d'utilisation

HP L10 Manuel utilisateur

HP 376227-B21 - ProLiant InfiniBand 4x Fabric Copper... Guide de référence rapide

HP ProCurve Switch 2900yl-24G Manuel utilisateur

HP ProCurve 1700-24 Manuel utilisateur

HP ProCurve 10 Manuel utilisateur

HP 1420-24G-2SFP Instructions de montage

HP 6125XLG Manuel d'installation

HP Q.11. (2510-24) Manuel utilisateur

HP 6125G Instructions d'utilisation

HP ProCurve 6600-48G-4XG Instructions de montage

HP 2610 Manuel de programmation

HP ProCurve 4202vl-48G Manuel utilisateur

HP ProCurve 6208M-SX Manuel

HP 5120 SI Series Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur