HP C8000 - Workstation - 0 MB RAM Mode d’emploi

Release Notes for HP Common 3D Graphics for HP-UX 11.11 (June 2004)

on PA-RISC Based Systems (HP-UX 11.i version 1)

----------------------------------------------------------------------

Print Date: June 2004

FireGL is used under license and is a registered trademark or trademark of ATI

Technologies Inc. in the United States and other countries.

1. ANNOUNCEMENTS

These Release Notes contain information that is common to the Xlib and the

following 3D graphics APIs: HP OpenGL, Starbase, HP-PHIGS, and HP PEX. For

specific information on each API, see their respective Release Notes. The on-

line Release Notes for the 3D graphics APIs are:

Common:

/opt/graphics/common/11.00_Rel_Notes

HP PEX:

/opt/graphics/PEX5/11.00_Rel_Notes

/opt/graphics/PEX5/newconfig/opt/graphics/PEX5/11.00_Rel_Notes

Starbase:

/opt/graphics/starbase/11.00_Rel_Notes

/opt/graphics/starbase/newconfig/opt/graphics/starbase/11.00_Rel_Notes

HP-PHIGS:

/opt/graphics/phigs/11.00_Rel_Notes

/opt/graphics/phigs/newconfig/opt/graphics/phigs/11.00_Rel_Notes

HP OpenGL:

/opt/graphics/OpenGL/11.00_Rel_Notes

For additional information on each API, see the "Graphics Administration

Guide" which can be viewed at http://www.hp.com/support/workstation_manuals.

2. WHAT'S IN THIS VERSION?

The 3D graphics software released with the HP-UX 11.11 Operating Environment

June 2004 release is supported on B, C, and J-class workstations. The

following features are included with this release:

* Support for New Devices: ATI FireGL

X1 and ATI FireGL T2 (supported on

C8000 workstation only)

See the following documentation for more information:

* The "Addenda -- Additional Graphics Information" section of this document

* The Release Notes for your particular 3D graphics API

These documents can be viewed at http://www.hp.com/support/workstation_manuals.

3. KNOWN PROBLEMS AND WORKAROUNDS

N/A

4. COMPATIBILITY AND INSTALLATION REQUIREMENTS

Software Requirements

=====================

None.

Hardware Requirements

=====================

With this release, Hewlett-Packard 3D graphics APIs are supported with the

following new bit-mapped graphics devices:

* ATI FireGL X1 (3D API support is limited to OpenGL only)

* ATI FireGL T2 (3D API support is limited to OpenGL only)

For detailed information about supported graphics configurations - HP-UX

computers combined with bit-mapped graphics devices - consult the "Graphics

Administration Guide".

For Graphics Information

========================

Use the "graphinfo" command to obtain information about the bit-mapped

graphics device(s) attached to your B, C, and J-class workstations. It reports

the following types of information:

* name of device (for example: HP VISUALIZE-FXE, ATI Fire GL T2)

* device driver (for use with 3D APIs)

* frame buffer configuration

* hardware features (acceleration, hardware Z-buffer)

* additional information related to HP's 3D graphics APIs

For additional information about programming applications for these devices,

consult the documentation for the 3D graphics API that you are using.

Operating System Platform Requirements

======================================

None.

Disk Space Requirements

=======================

Use swinstall to determine necessary and available disk space for the 3D

graphics API you wish to install.

5. PATCHES AND FIXES IN THIS VERSION

N/A

6. SOFTWARE AVAILABILITY IN NATIVE LANGUAGES

Localization is not planned for any 3D graphics API or the corresponding

documentation with this release.

7. TRADEMARKS

N/A

8. ADDENDA -- ADDITIONAL GRAPHICS INFORMATION

Graphics APIs

=============

Hewlett-Packard supports the following 3D graphics application programming

interface (API) libraries for use with the HP-UX 11.11 (June, 2004) release:

HP OpenGL, HP PEXlib, HP-PHIGS, and Starbase. Note that the HP PEXlib, HP-

PHIGS, and Starbase APIs are not supported on the ATI FireGL X1 and ATI FireGL

T2. For information about enhancements and changes to the current version of

each API, consult the separate Release Notes document(s) as described in the

ANNOUNCEMENTS section of this document (the Release Notes file(s) for a

particular API will not be present if the associated optional product has not

been installed on your system).

ATI FireGL X1 and ATI FireGL T2 Information

===========================================

The ATI FireGL X1 graphics device is HP's high end 3D graphics product. The

ATI FireGL T2 graphics device is HP's mid-range 3D graphics product. These

devices are supported on the following HP workstations:

* C8000

For more information on these devices (including supported visuals and other

device attributes), refer to the following documentation which can be found by

visiting HP’s website at http://www.hp.com/support/workstation_manuals:

* "Graphics Administration Guide"

* "OpenGL Implementation Guide"

Discontinuance Information

==========================

Hewlett-Packard evaluates the capabilities and device support of HP-UX on an

ongoing basis. There are no graphics devices being discontinued with this

release.

Threads Information

===================

HP's 3D graphics APIs (HP OpenGL, HP PEX, HP-PHIGS, and Starbase) all support

Level 1b threads for this release. This means HP's 3D graphics APIs can be

used in a threaded application, but all 3D graphics calls must reside in a

single thread. Other threads can be used for computations, etc.

Note that using OpenGL graphics in a Kernel threaded application requires that

the application link with libpthread.sl (not the archived version,

libpthread.a). Also note that OpenGL libraries are not cancel safe or fork

safe.

For more information on using threads, see the following documentation:

* The devresource.hp.com web site (see "Threads and Multiprocessing")

* The "OpenGL Programming Guide"

* The "OpenGL Reference Manual"

* "Threadtime" by S. Norton and M. Dipasquale

Additions to X11 Support

========================

HP’s Xfree86-based Xserver supports the ATI FireGL X1 and ATI FireGL T2

graphics devices. For more details on the features and capabilities of this

Xserver, please refer to the "Graphics Administration Guide" document.

Autres manuels pour C8000 - Workstation - 0 MB RAM

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HP Logiciel

HP Integrity BL860c Mode d’emploi

HP Neoview SQL Manuel utilisateur

HP StorageWorks 2000fc Manuel utilisateur

HP NonStop SSL Manuel utilisateur

HP NAS 1200s Manuel utilisateur

HP BladeSystem Dual NC370i - Multifunction Network... Manuel utilisateur

HP Data Protector A.06.11 Manuel utilisateur

HP 4320t - Mobile Thin Client Instructions de montage

HP -UX B6941-90001 Manuel utilisateur

HP StorageWorks 2/140 - Director Switch Mode d’emploi

HP PROCURVE 2520 Manuel utilisateur

HP Neoware c50 - Thin Client Manuel utilisateur

HP Integrity BL860c Guide de référence rapide

HP Integrity Superdome 2 Manuel utilisateur

HP cc2300 Manuel utilisateur

HP Deskjet 812c Mode d’emploi

HP Integrity BL860c Manuel utilisateur

HP Compaq dc5750 MT Manuel utilisateur

HP b2600 Mode d’emploi

HP StorageWorks XP10000 - Disk Array Mode d’emploi

HP C7791C - DesignJet 130 Color Inkjet Printer Guide de configuration

HP StorageWorks MSA 2/8 - SAN Switch Manuel utilisateur

HP LeftHand P4000 - SAN Solutions Mode d’emploi

HP T5145 - Thin Client - Tower Manuel utilisateur

Manuels Logiciel populaires d'autres marques

COMPRO

COMPRO COMPROFM Manuel utilisateur

Muratec

Muratec OFFICEBRIDGE ONLINE Manuel utilisateur

Oracle

Oracle Contact Center Anywhere 8.1 Manuel utilisateur

Adobe

Adobe 65007312 - Photoshop Lightroom Manuel

Avaya

Avaya NULL One-X for RIM Blackberry Manuel utilisateur

PS Audio

PS Audio PowerPlay Manuel du propriétaire

Brady

Brady LOCKOUT PRO 3.0 Manuel de service

Avaya

Avaya Interaction Center Manuel utilisateur

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manuel

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manuel utilisateur

Oracle

Oracle Application 9i Manuel utilisateur

Acer

Acer RDM Manuel utilisateur

Canon

Canon Vixia HF21 Manuel utilisateur

Canon

Canon ZR950 Manuel utilisateur

Samsung

Samsung Auto Backup Manuel utilisateur

Polycom

Polycom Vortex EF2201 Instructions d'installation et d'utilisation

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manuel utilisateur

Novell

Novell SP2 - S Mode d’emploi