HP Cc2300 Manuel utilisateur

Installation Instructions:

HP Universal Rack Mount Kit for

hp Carrier-Grade Servers

cc2300, cc3300, and cc3310

(19-23 inch 2- and 4-Post Racks)

Version 2.0

Manufacturing Part Number: cc3310_RackMount

February 2004

U.S.A.

Legal Notices

The information contained herein is subject to change without notice. The only

warranties for HP products and services are set forth in the express warranty

statements accompanying such products and services. Nothing herein should be

construed as constituting an additional warranty. HP shall not be liable for technical

or editorial errors or omissions contained herein.

Printed in the U.S.A.

Related Documents. The HP Server cc3310 User Information Diagnostics and

Utilities Resource CD-ROM has been provided with your server. It contains a complete

documentation set for the server. Included on the CD-ROM is the hp Carrier-Grade

Server cc3310 Product Guide, which contains in-depth troubleshooting, installation,

and repair information.

In addition, the latest versions of all cc3310 documents, and any product updates to

these documents, are posted under the appropriate server at: http://docs.hp.com.

Search keyword cc3310.

HP Universal Rack Mount Kit (with Stop

Feature) for 19-23 in. 2- and 4-Post Racks

Installation Instructions

Introduction

These instructions support the following rack types:

· 19" 2-post and 4-post racks with EIA Universal and EIA wide hole spacing (use rack mount kit: A6905A)

· 23" 2-post and 4-post racks with EIA Universal, EIA wide and ETSI hole spacing (use rack mount kit:

A6945A)

· The A6905A and A6945A rack mount kits can be installed in 2-post racks with equipment mounting

posts from 3 to 5 inches deep.

· The A6905A and A6945A rack mount kits can be installed in 4- post racks with front equipment

mounting rail to rear equipment mounting rail distance not exceeding 24 inches.

Platforms Supported:

· cc3300 and cc3310 Carrier Grade Server

· cc2300 Carrier Grade Server

Content List:

· A6905A Rack Mount Kit (for 19" 2-Post and 4-Post racks)

· A6945A Rack Mount Kit (for 23" 2-Post and 4-Post racks)

HP Universal Rack Mount Kit (with Stop Feature) for 19-23 in. 2- and 4-Post Racks

Installation Instructions

Figure 1-1. A6905A Rack Mount Kit (for 19" 2-Post and 4-Post racks)

HP Universal Rack Mount Kit (with Stop Feature) for 19-23 in. 2- and 4-Post Racks

Installation Instructions

Figure 1-2. A6945A Rack Mount Kit (for 23" 2-Post and 4-Post racks)

HP Universal Rack Mount Kit (with Stop Feature) for 19-23 in. 2- and 4-Post Racks

Installation Instructions

4-Post Installation Instructions

Install the rack mount kit components as follows:

NOTE Although a cc3300 chassis is shown in the illustrations, these instructions also apply to a

cc3310 and cc2300 chassis.

1. Attach the two inner rails (marked LEFT and RIGHT) to the chassis, each with three 8-32x1/4" SEMS

screws.

2. Attach the universal front mounting bracket to the chassis, each with two 8-32x1/4" SEMS screws.

Figure 1-3. Installing the Inner Rails and Front End Mounting Brackets

NOTE The universal front mounting bracket can be flipped in order to position the system further

forward in the rack (see inset).

HP Universal Rack Mount Kit (with Stop Feature) for 19-23 in. 2- and 4-Post Racks

Installation Instructions

Figure 1-4. Front Mounting Bracket Installation

3. Using two 8-32 KEPS nuts per L-bracket, assemble L-brackets* to the outer rail’s four outermost

threaded studs. (The A6945A rack mount kit contains both EIA and ETSI L-brackets.)

Figure 1-5. Attaching L-Brackets to Outer Rail

*Note: 23-inch EIA L-brackets

are illustrated.

HP Universal Rack Mount Kit (with Stop Feature) for 19-23 in. 2- and 4-Post Racks

Installation Instructions

4. Install the outer rail subassemblies into the rack using ten or twelve (19" or 23" kits, respectively) 10-

32x1/2" SEMS screws. If bar-nuts are used, they should be installed such that all threads are aligned

vertically, ensuring the center hole is not skewed with respect to the holes on the rack rail.

NOTE If mounting a 1U system in a 1U confined space, four 2U bar-nuts are included to replace the

1U bar-nuts. The 2U bar-nuts need to be installed in the 1U space either above or below the

1U space where this kit is being mounted. When installing multiple 1U systems, the 2U bar-

nuts should be used in the next to last kit.

NOTE L-Brackets should be adjusted front-to-back to fit rack depth. The distance between the front

equipment mounting rail and rear equipment mounting rail cannot exceed 24 inches.

Figure 1-6. Installing the Outer Rails

HP Universal Rack Mount Kit (with Stop Feature) for 19-23 in. 2- and 4-Post Racks

Installation Instructions

5. Slide the system into the rack making sure the inner rails are captured by the outer rails. Support the

weight of the system until the lock features on the inner rails engage with the slot features on the outer

rails. An audible “click” will be heard.

Figure 1-7. Engaging the Rails

HP Universal Rack Mount Kit (with Stop Feature) for 19-23 in. 2- and 4-Post Racks

Installation Instructions

NOTE Once engaged, the lock features must be released to remove the system from the rack. To

release the lock features, depress the two latches with the blue arrows (one on either side)

downward. While depressing the lock features and supporting the system weight, pull the

system out. Pressure can be released once the lock features disengage from the outer rail.

Figure 1-8. Releasing the Rails

6. Install two 10-32X1/2" SEMS screws to hold the universal front mounting brackets to either the L-

brackets or the rack’s equipment mounting rails (23" or 19", respectively).

Figure 1-9. Securing the Chassis in the Rack

Autres manuels pour cc2300

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HP Serveur

HP L1000 - 9000 - 0 MB RAM Mode d'emploi

HP ProLiant DL160 Generation 6 Manuel utilisateur

HP Tc2120 - Server - 256 MB RAM Manuel utilisateur

HP Tc4100 - Server - 256 MB RAM Manuel technique

HP Integrity NonStop i NS2300 Manuel technique

HP BL685c - ProLiant - 4 GB RAM Manuel de référence

HP T5700 - compaq thin client Manuel utilisateur

HP NonStop NS-series Manuel utilisateur

HP t5740e - Thin Client Instructions d'utilisation

HP ProLiant ML310 Generation 5p Manuel utilisateur

HP P5389A - Intel Pentium III-S 1.4 GHz Processor... Manuel utilisateur

HP ProLiant BL660c Gen9 Manuel

HP ProLiant DL385 G5p Manuel

HP ProLiant ML110 G7 Manuel utilisateur

HP RP7405/7410 Manuel utilisateur

HP DesignJet T610 Manuel utilisateur

HP T5530 - Compaq Thin Client Instructions d'utilisation

HP ML570 - ProLiant - G2 Instructions d'utilisation

HP ProLiant DL180 Generation 6 (G6) Instructions d'utilisation

HP ProLiant XL250a Gen9 Instructions d'utilisation

HP Integrity Superdome 2 16-socket Manuel de service

HP ML570 - ProLiant - G2 Instructions d'utilisation

HP Xw25p - ProLiant - Blade Workstation Guide d'installation

HP ProLiant DL120 Gen9 Manuel

Manuels Serveur populaires d'autres marques

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

Milestone

Milestone Husky IVO 350T Manuel utilisateur

Planet

Planet NAS-7410 Manuel utilisateur

Lenovo

Lenovo ThinkSystem SR635 V3 Manuel utilisateur

Dell

Dell PowerEdge HS5610 Manuel

HP cc2300 Manuel utilisateur

Manuels Serveur populaires d'autres marques