HP BL465c - ProLiant - 2 GB RAM Manuel utilisateur

HP ProLiant BL465c

Generation 5

Server Blade

Installation Instructions

Overview

Installation of a server blade requires the following steps:

1. Install and configure an HP BladeSystem c-Class

enclosure.

2. Install any server blade options.

3. Install interconnect modules in the enclosure.

4. Connect the interconnect modules to the network.

5. Install a server blade.

6. Complete the server blade configuration.

For definitions of the acronyms used in this document, refer to

"Acronyms and abbreviations" in the server blade user guide.

Installing an HP BladeSystem c-

Class enclosure

Before performing any server blade-specific procedures,

install an HP BladeSystem c-Class enclosure.

The most current documentation for server blades and other

HP BladeSystem components is available at the HP website

(http://www.hp.com/go/bladesystem/documentation).

Documentation is also available in the following locations:

•Documentation CD that ships with the enclosure

•HP Business Support Center website

(http://www.hp.com/support)

•HP Technical Documentation website

(http://docs.hp.com)

Installing server blade options

Before installing and initializing the server blade, install any

server blade options, such as an additional processor, hard

drive, or mezzanine card. For server blade options

installation information, see the HP ProLiant BL465c

Generation 5 Server Blade User Guide on the Documentation

CD or on the HP website

(http://www.hp.com/go/bladesystem/documentation).

Installing interconnect modules

For specific steps to install interconnect modules, see the

documentation that ships with the interconnect module.

The information contained herein is subject to change without notice. The

only warranties for HP products and services are set forth in the express

warranty statements accompanying such products and services. Nothing

herein should be construed as constituting an additional warranty. HP shall

not be liable for technical or editorial errors or omissions contained herein.

Part Number 454507-001

October 2007 (First Edition)

Interconnect bay numbering and device

mapping

To support network connections for specific signals, install an

interconnect module in the bay corresponding to the

embedded NIC or mezzanine signals.

Server blade

signal

Interconnect bay Interconnect bay labels

NIC 1

(Embedded)

NIC 2

(Embedded)

Mezzanine 1 3 and 4

Mezzanine 2 5 and 6

7 and 8

For detailed port mapping information, see the HP

BladeSystem enclosure installation poster or the

HP BladeSystem enclosure setup and installation guide on the

HP website

(http://www.hp.com/go/bladesystem/documentation).

Connecting to the network

To connect the HP BladeSystem to a network, each enclosure

must be configured with network interconnect devices to

manage signals between the server blades and the external

network.

Two types of interconnect modules are available for HP

BladeSystem c-Class enclosures: Pass-thru modules and switch

modules. For more information about interconnect module

options, see the HP website

(http://www.hp.com/go/bladesystem/interconnects).Installin

g a server blade

CAUTION: To prevent improper coolin

and thermal

damage, do not operate the server blade or the

enclosure unless all hard drive and device bays are

populated with either a component or a blank.

1. Remove the blank.

2. Remove the enclosure connector cover.

3. Prepare the server blade for installation.

4. Install the server blade.

Completing the configuration

To complete the server blade and HP BladeSystem

configuration, see the overview card that ships with the

enclosure.

Autres manuels pour BL465c - ProLiant - 2 GB RAM

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HP Serveur

HP st5747 - Streaming Client Manuel d'utilisation et d'entretien

HP BL30p - ProLiant - 1 GB RAM Manuel utilisateur

HP DL385 - ProLiant - G5 Instructions d'utilisation

HP T5725 - Compaq Thin Client Manuel de service

HP ProLiant SL335s G7 Instructions de montage

HP A4500A - VMEbus Single Board Computer 744... Manuel utilisateur

HP Integrity rx5670 Mode d'emploi

HP Blade bc1000 Manuel

HP AlphaServer ES47 Manuel de service

HP ProLiant DL380 Generation 7 (G7) Instructions d'utilisation

HP ProLiant DL360 Generation9 Instructions d'utilisation

HP t5335 - Thin Client Manuel utilisateur

HP DL360 - ProLiant - Photon Manuel utilisateur

HP P2000 G3 Mode d’emploi

HP vc4820T - Thin Client Manuel d'utilisation et d'entretien

HP Integrity NonStop i NS2300 Manuel technique

HP Integrity Superdome 2 16-socket Manuel utilisateur

HP T5700 - compaq thin client Manuel utilisateur

HP vc4815 - Thin Client Manuel utilisateur

HP Tc4100 - Server - 256 MB RAM Manuel utilisateur

HP BL25p - ProLiant - 1 GB RAM Instructions d'utilisation

HP t5325 - Thin Client Manuel utilisateur

HP 9000 rp7420 Manuel utilisateur

HP ProCurve 1600M Instructions d'installation

Manuels Serveur populaires d'autres marques

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

Milestone

Milestone Husky IVO 350T Manuel utilisateur

Planet

Planet NAS-7410 Manuel utilisateur

Lenovo

Lenovo ThinkSystem SR635 V3 Manuel utilisateur

Dell

Dell PowerEdge HS5610 Manuel