HP AlphaServer ES47 Manuel de service

Autres manuels pour AlphaServer ES47

3

Ce manuel convient aux modèles suivants

2

Table des matières

Autres manuels HP Serveur

HP

HP Proliant DL580 Instructions de montage

HP

HP Compaq t1010 Manuel utilisateur

HP

HP DL120 - ProLiant - G5 Instructions d'utilisation

HP

HP 127695-B21 - Smart Array 431 RAID Controller Manuel utilisateur

HP

HP NetServer LH 3r Manuel utilisateur

HP

HP Cluster Platform Introduction v2010 Manuel de service

HP

HP ProLiant BL280c Generation 6 (G6) Instructions d'utilisation

HP

HP ProLiant BL465c Generation 7 (G7) Instructions d'utilisation

HP

HP ProLiant DL585 Generation 2 Manuel utilisateur

HP

HP ProLiant DL288 GENERATION 6 Manuel utilisateur

HP

HP ProLiant DL320G5p/X3075 Instructions d'installation

HP

HP Enterprise ProLiant MicroServer Gen10 Manuel utilisateur

HP

HP ProLiant BL490c Manuel utilisateur

HP

HP D7171A - NetServer - LPr Manuel de service

HP

HP LC2000r - NetServer - 128 MB RAM Manuel utilisateur

HP

HP ProLiant MicroServer Manuel utilisateur

HP

HP ProLiant MicroServer Gen8 Manuel utilisateur

HP

HP 4700 Guide d'installation et d'utilisation

HP

HP ProLiant DL560 Manuel utilisateur

HP

HP t5630 - Thin Client Instructions d'utilisation

HP

HP ProLiant ML310e Manuel utilisateur

HP

HP D7171A - NetServer - LPr Manuel utilisateur

HP

HP D7171A - NetServer - LPr Manuel de la liste des pièces

HP

HP ProLiant DL380 Gen9 Manuel

Manuels Serveur populaires d'autres marques

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

Milestone

Milestone Husky IVO 350T Manuel utilisateur

Planet

Planet NAS-7410 Manuel utilisateur

Lenovo

Lenovo ThinkSystem SR635 V3 Manuel utilisateur

Dell

Dell PowerEdge HS5610 Manuel

1

hp AlphaServer ES47/ES80/GS1280

Installation Information

Revision 1.0

This help file covers the installation of both the cabinet and pedestal forms of the

hp AlphaServer ES47, the ES80 and all models of the hp AlphaServer GS1280.

8

Installations:

ES47 Tower Installation

9

The ES47 tower comes in a single 2P drawer and embedded I/O.

1. Unpack and de-skid the system.

2. Place the tower to the desired location.

3. Install the floor stand. Pull the floor stands apart, place the tower on them,

and press the floor stand against the sides of the tower.

4. Connect a LAN (PC) console, or Connect a Graphics Terminal console, or

Connect a Serial Line console, or AMS Console Connection.

5. Verify the installation.

10

Unpacking the ES47 Tower

11

The ES47 tower weighs approximately 120 pounds. Take appropriate

precautions when unpacking and moving the system.

To unpack the ES47:

1. Cut the two packing straps holding the box to the pallet.

2. Open the top of the box.

3. Take out the two styrofoam packs at the top.

4. Lift the cardboard carton off the styrofoam that is the bottom of the box.

Remove the tower and its stand.

12

Install the ES 47 Tower floor stand

13

Install the floor stand. Pull the floor stands apart, place the tower on them, and

press the floor stand against the sides of the tower.

14

ES47 Tower LAN (PC) Console Connection

15

Making the hardware connection:

1. Open the front door.

2. Unscrew the captive screw that holds the top cover to the frame.

3. Pull the top cover back and off the frame.

4. Unscrew the captive screw that holds the right side panel to the frame.

5. Lift the right side panel off the frame

6. Using a BN24Q-xx cable, (a crossover network cable) connect a

PC/laptop to the network receptacle now available on the bottom shelf.

7. Lay the cable on the shelf so that it exits the back of the tower.

8. Replace the side panel and cover.

Setting up the PC/laptop:

The procedure listed here is Microsoft Windows 200 specific.

1. To set up your PC/laptop on the internal LAN, it needs a specific LAN

address; use 1.253.0.254.

Do that by following this procedure:

Click on start, settings, network and dial-up connections.

Select local area connections.

Click on properties.

Select Internet protocol (TCP/IP)

Change from Obtain an IP address automatically to Use for following

IP address.

Enter the following in the Internet Properties (TCP/IP) Properties Box:

Field Enter

IP address field 10.253.0.254 - this is a special fixed IP

address on the internal LAN that points

to the PMU.

Subnet mask field 255.0.0.0

Default gateway leave blank

Back out of all the dialog boxes by clicking on close.

Set up a telenet address of 10.253.0.1. This is the PMU’s address.

Start a telnet session to address 10.253.0.1.

Apply power to the system by putting the circuit breakers on the PDU in the on

position. The MBM> prompt should appear on the PC/laptop.

Refer to the AMS 1.1.0 CD for instructions on installing and using the

AlphaServer Management Utility (AMU) from a PC running Windows.

16

ES47 Tower Graphics Terminal Console Connection