HP OMEN X 900 Instructions d'installation

EL-MF877-00 Page 1

Template Revision B

PSG instructions for this template are available at EL-MF877-01

Product End-of-Life Disassembly Instructions

Product Category: Personal Computers

Marketing Name / Model

[List multiple models if applicable.]

OMEN X by HP Desktop PC 900

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions

for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU

directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment.

1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as

applicable.

Item Description

Notes

Quantity

of items

included

in product

Printed Circuit Boards (PCB) or Printed Circuit

Assemblies (PCA)

With a surface greater than 10 sq cm

Batteries

All types including standard alkaline and lithium

coin or button style batteries

Mercury-containing components

For example, mercury in lamps, display backlights,

scanner lamps, switches, batteries

Liquid Crystal Displays (LCD) with a surface

greater than 100 sq cm

Includes background illuminated displays with gas

discharge lamps

Cathode Ray Tubes (CRT)

Capacitors / condensers (Containing PCB/PCT)

Electrolytic Capacitors / Condensers measuring

greater than 2.5 cm in diameter or height

External electrical cables and cords

Gas Discharge Lamps

Plastics containing Brominated Flame Retardants

weighing > 25 grams (not including PCBs or PCAs

already listed as a separate item above)

HDD Fan 170g and PCI Fan 170g and PSU fan

and CPU LC FAN 290g and GFX LC FAN 170g

Components and parts containing toner and ink,

including liquids, semi-liquids (gel/paste) and toner

Include the cartridges, print heads, tubes, vent

chambers, and service stations.

Components and waste containing asbestos

Components, parts and materials containing

refractory ceramic fibers

EL-MF877-00 Page 2

Template Revision B

PSG instructions for this template are available at EL-MF877-01

Components, parts and materials containing

radioactive substances

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components

and materials requiring selective treatment can be removed.

Tool Description

Tool Size (if

applicable)

Screw driver

Hex 2.5

Micro shear

Screw driver

PH2

Screw driver

PH1

Description #5

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

1. Remove Top cover. (see Figure 1-2)

2. Remove Gfx and CPU cooler (see Figure 3-6 )

3. Remove MB (see Figure 7-9)

4. Remove the DIMM,CPU and Battery (see Figure 10-13)

5. Remove the MB tray (see Figure 14)

6. Remove the Function Board (see Figure 15-16)

7. Remove the HDD (see Figure 17-18)

8. Remove the ODD (see Figure 19-21)

9. Remove the Voodoo grille light board (see Figure 22-23)

10. Remove the Front lighting board (see Figure 24-26)

11. Remove the Rear Bezel (see Figure 27-30)

12. Remove the Antenna cable (see Figure 31)

13. Remove the HDD FAN (see Figure 32)

14. Remove the FRONT_TOP_FILTER (see Figure 33)

15. Remove the PCI FAN (see Figure 34)

16. Remove the ODD SATA cable (see Figure 35-41)

17. Remove the HDD SATA cable (see Figure 42-43)

18. Remove the EXTEND POWER CORD (see Figure 44)

19. Remove the PSU from chassis (see Figure 45-48)

20. Remove the Electrolytic Capacitors from PSU board HP P/N: 854201-003 (DPS-1300AB-5 A) (see Figure 49-60)

21. Remove the Electrolytic Capacitors from PSU board HP P/N: 854200-004 (Niagara 600W) (see Figure 61-73)

22. Remove the CPU LC FAN (see Figure 74-75)

23. Remove the GFX LC FAN (see Figure 76)

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items

contained in the product that require selective treatment (with descriptions and arrows identifying locations).

EL-MF877-00 Page 3

Template Revision B

PSG instructions for this template are available at EL-MF877-01

Figure1 Press the button on rear bezel

Figure2 Remove the top cover

Figure3 Release 12 screws

Figure4 Release GXF and GFX bracket screw and cable

then remove GFX card LC

Figure5 Unplug the cable of fan and pump

Figure6 Release the CPU Pump screw to remove CPU

EL-MF877-00 Page 4

Template Revision B

PSG instructions for this template are available at EL-MF877-01

Figure7 Unplug all cable conn from PCA.

Figure8 Release 8 pcs screws from PCA

Figure9 Remove PCA from chassis

Figure10 Push the hooks on both sides and then pick up

the memory

Figure11 Rotate the handle and open it up

Figure12 Remove the CPU from board

EL-MF877-00 Page 5

Template Revision B

PSG instructions for this template are available at EL-MF877-01

Figure13 Remove the battery from the PCA

Figure14 Release 2 pcs screws from MB tray and take off

MB tray

Figure15 Unplug all cable conn from function board PCA

Figure16 Release 5 pcs screws from function board PCA

Figure17 Open HDD Door and PUSH HDD locker to left

Figure18 Pull up HDD cage and release 4 screws to

remove HDD

EL-MF877-00 Page 6

Template Revision B

PSG instructions for this template are available at EL-MF877-01

Figure19 Use pin to open ODD Tray

Figure20 Release ODD latch and hold

Figure21 Press ODD unlock bar to PUSH off ODD

Figure22 Open Voodoo grill cover

Figure23 Disconnect cable

Figure24 Remove Front bezel

EL-MF877-00 Page 7

Template Revision B

PSG instructions for this template are available at EL-MF877-01

Figure25 Remove Tape and unplug cable connect

Figure26 release 14 screws to remove 3 front light board

Figure27 Release 4 screws from rear cover

Figure28 Remove Rear PSU Grille

Figure29 Release 1 screws from AC_IN connect

Figure30 Remove Rear cover

EL-MF877-00 Page 8

Template Revision B

PSG instructions for this template are available at EL-MF877-01

Figure31 Release 4 screws from 2 Antenna cable and

remove it

Figure32 Release 4 screws from HDD FAN and

remove it

Figure33 Remove FRONT_TOP_FILTER

Figure34 Release 4 screws from PCI FAN and remove

Figure35 Release 1 screw and take off cable holder

Figure36 Release 2 screws from rear side

EL-MF877-00 Page 9

Template Revision B

PSG instructions for this template are available at EL-MF877-01

Figure37 Release 2 screw at front side

Figure38 Arrange all the cables those through the

POWER PARTITION

Figure39 Release 2 screw at the bottom of

power partition

Figure 40 Rotate and take off power partition

Figure41 Release 2 screw from power

partition and remove ODD cable

Figure42 Release 4 screw to remove 2 HDD SATA

BKT

EL-MF877-00 Page 10

Template Revision B

PSG instructions for this template are available at EL-MF877-01

Figure43 Release 4 screw and remove 2 HDD SATA

cable

Figure44 Release 1 screws and unplug connect to

remove extend power cord

Figure45 Release 3 screws

Figure46 Pull out PSU

Figure47 Release 4 screw and remove psu bkt

Fig 48

Autres manuels HP Ordinateur de bureau

HP Pro 2110 Guide de configuration

HP j6700 Guide de démarrage rapide

HP T1000 Manuel utilisateur

HP Z200 - Small Form Factor Workstation Manuel utilisateur

HP TouchSmart dx9000 Manuel utilisateur

HP Compaq d228 MT Manuel d'utilisation et d'entretien

HP 21-b All-in-One ENERGY STAR Instructions de montage

HP Model 748 - VME Workstation Guide de référence

HP ENVY x360 15 Manuel

HP m9500f - Pavilion - Elite Fiche technique

HP Presario CQ3100 - Desktop PC Manuel d'utilisation et d'entretien

HP Xw6200 - Workstation - 2 GB RAM Manuel utilisateur

HP Pavilion t328 Manuel utilisateur

HP 9000 Series Manuel utilisateur

HP Pavilion a200 - Desktop PC Manuel utilisateur

HP Xw4550 - Workstation - 2 GB RAM Manuel utilisateur

HP Rp5000 - Point of Sale System Instructions d'installation et d'entretien

HP Kayak XW A2-U2-W2 Manuel utilisateur

HP Compaq dx2810 Microtower Instructions d'utilisation

HP xw8600 - Workstation Manuel utilisateur

HP 124708-001 - ProLiant Cluster - 1850 Manuel de référence

HP Compaq Elite 8300 All-in-One Manuel utilisateur

HP Pavilion t370 Manuel utilisateur

HP Compaq d220 MT Manuel

Manuels Ordinateur de bureau populaires d'autres marques

Asus

Asus E210 Series Manuel utilisateur

Dell

Dell Inspiron 600m Manuel utilisateur

Dell

Dell Inspiron 3662 Manuel utilisateur

TotalFlow

TotalFlow uFLO Manuel utilisateur

Logitech

Logitech MK320 Manuel utilisateur

Dell

Dell XPS 730 H2C Manuel utilisateur

Sony

Sony Vaio Series Manuel utilisateur

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuel utilisateur

Alto

Alto MD 250 Manuel utilisateur

Lenovo

Lenovo ThinkCentre Edge 72 Manuel

Lenovo

Lenovo ThinkStation D20 Manuel

Arbor Technology

Arbor Technology FPC-7800 Series Manuel utilisateur

Sony

Sony VAIO VGX-TP1 Series Manuel utilisateur

Asus

Asus Eee Box B204 Manuel utilisateur

Dell

Dell Optiplex 9010 All In One Manuel utilisateur

Everex

Everex eXplora Manuel utilisateur

Lenovo

Lenovo ThinkCentre M75e Manuel utilisateur

Dell

Dell Alienware Area-51 R4 Manuel utilisateur