HP I2000 Instructions de montage

Hewlett-Packard Company

3404 East Harmony Road

Fort Collins, Colorado 80528

Pub. No. A6037-90040

Read Before Installing

Microsoft©Windows©XP Installation Instructions

for HP i2000 Workstation Systems

Products Affected:

All HP i2000 Workstations that use C0 step Itanium™ processors.

Description:

When installing 64-bit Microsoft©Windows XP©, these instructions should be followed for proper operating

system installation and system functionality. NOTE: Windows XP must ﬁrst be installed on the system.

Instructions:

Using Windows CONFIGFLAG Setting (nvrboot utility)

Boot Option settings are stored in nonvolatile RAM (NVRAM). There is a program for setting nonvolatile

RAM named

nvrboot.eﬁ

Boot to the EFI prompt. In the EFI partition of the boot disk, cd to the MSUtil directory. Run nvrboot, and

the screen will appear as indicated below:

Note:

In the example below, lines 2 to 5 may look different or may not be present. Option 7 (Boot

Options) will always be present. In case the EFI option is not present, Boot Options can be used to add

it. Windows Boot Option will be added automatically during OS installation.

Note: Bold

letters are system prompts and underlined italics are user responses.

Shell

> fs0:

Fs0:\>

cd msutil

fs0:\MSUtil>

nvrboot

NVRBOOT: OS Boot Options Maintenance Tool (Revision: 1.0b)

1. Microsoft Windows Whistler Professional

2. VenHw(Unknown Device: 00)

3. VenHw(Unknown Device: FF)

4. VenHw(Unknown Device: FF)/CDROM(Entry 1)

5. VenHw(Unknown Device: 80)/HD(Part1,SigD87FA76A)

6. EFI

7. Boot Options Maintenance Menu

Windows OS Boot Option

(D)isplay (M)odify (C)opy E(x)port (I)mport (E)rase (P)ush (H)elp (Q)uit

Select>

Enter OS boot option to modify:

LoadIdentiﬁer = Microsoft Windows Whistler Professional

OsLoadOptions =

EﬁOsLoaderFilePath = \EFI\Microsoft\WINNT50\ia64ldr.eﬁ

OsLoaderFilePath = \WINDOWS

Enter var to modify:

OsLoadOptions =

/CONFIGFLAG=2943

LoadIdentiﬁer = Microsoft Windows Whistler Professional

OsLoadOptions = /CONFIGFLAG=2943

EﬁOsLoaderFilePath = \EFI\Microsoft\WINNT50\ia64ldr.eﬁ

OsLoaderFilePath = \WINDOWS

Press enter to continue

Select>

There are cases when you may want to turn on kernel debugging. This is also achieved by setting the

OsLoadOptions. In this case, care should be taken so that the Conﬁgﬂag option is the last command in the

string.

fs0:\MSUtil>

nvrboot

NVRBOOT: OS Boot Options Maintenance Tool (Revision: 1.0b)

1. Microsoft Windows Whistler Professional

2. VenHw(Unknown Device: 00)

3. VenHw(Unknown Device: FF)

4. VenHw(Unknown Device: FF)/CDROM(Entry 1)

5. VenHw(Unknown Device: 80)/HD(Part1,SigD87FA76A)

6. EFI

7. Boot Options Maintenance Menu

Windows OS Boot Option

(D)isplay (M)odify (C)opy E(x)port (I)mport (E)rase (P)ush (H)elp (Q)uit

Select>

Enter OS boot option to modify:

LoadIdentiﬁer = Microsoft Windows Whistler Professional

OsLoadOptions = / CONFIGFLAG=2943

EﬁOsLoaderFilePath = \EFI\Microsoft\WINNT50\ia64ldr.eﬁ

OsLoaderFilePath = \WINDOWS

Enter var to modify:

OsLoadOptions =

/debug /debugport=com1 /baudrate=115200 /CONFIGFLAG=2943

LoadIdentiﬁer = Microsoft Windows Whistler Professional

OsLoadOptions = /debug /debugport=com1 /baudrate=115200 /CONFIGFLAG=2943

EﬁOsLoaderFilePath = \EFI\Microsoft\WINNT50\ia64ldr.eﬁ

OsLoaderFilePath = \WINDOWS

Press enter to continue

Select>

After you quit from nvrboot, you will be in EFI prompt. Type ‘exit’ and press return. This will take you back to

the Boot Options menu. Select ‘Boot Options Maintenance Menu’ and once inside, simply exit. This will

read back the changes made using the nvrboot program.

Once the changes are made, they will be retained across boots, power-off etc. However, when a fresh OS

installation is done, the above procedure will have to be repeated, as OS installation will introduce a new

Windows Boot Option.

Technical Support

HP Technical Computing Division

Autres manuels pour i2000

Table des matières

Autres manuels HP Ordinateur de bureau

HP Brio BA200 Manuel

HP Pavilion x360 14 Series Manuel

HP Xw4600 - Workstation - 2 GB RAM Instructions d'utilisation

HP A320m - Pavilion - 256 MB RAM Fiche technique

HP Compaq Pro 4300 Manuel utilisateur

HP Pavilion t700 - Desktop PC Manuel utilisateur

HP TouchSmart 420-1100 Manuel utilisateur

HP Pavilion a5000 - Desktop PC Comment utiliser

HP vectra vl420 Manuel utilisateur

HP Pavilion t100 - Desktop PC Comment utiliser

HP Pavilion t500 - Desktop PC Instructions d'installation

HP vectra vl420 Comment utiliser

HP TouchSmart IQ790 Manuel utilisateur

HP Pavilion m9515 Manuel utilisateur

HP Pavilion 424 Manuel utilisateur

HP ProLiant xw2x220c - Blade Workstation Manuel

HP Compaq Presario Manuel utilisateur

HP Compaq 8200 Elite Series Manuel utilisateur

HP Compaq dx7200 MT Manuel utilisateur

HP Media Center Manuel utilisateur

HP SignagePlayer mp8000r Manuel

HP Pavilion t227k Manuel utilisateur

HP TouchSmart 520-1200 Manuel utilisateur

HP Visualize j6000 Manuel de référence

Manuels Ordinateur de bureau populaires d'autres marques

Asus

Asus E210 Series Manuel utilisateur

Dell

Dell Inspiron 600m Manuel utilisateur

Dell

Dell Inspiron 3662 Manuel utilisateur

TotalFlow

TotalFlow uFLO Manuel utilisateur

Logitech

Logitech MK320 Manuel utilisateur

Dell

Dell XPS 730 H2C Manuel utilisateur

Sony

Sony Vaio Series Manuel utilisateur

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuel utilisateur

Alto

Alto MD 250 Manuel utilisateur

Lenovo

Lenovo ThinkCentre Edge 72 Manuel

Lenovo

Lenovo ThinkStation D20 Manuel

Arbor Technology

Arbor Technology FPC-7800 Series Manuel utilisateur

Sony

Sony VAIO VGX-TP1 Series Manuel utilisateur

Asus

Asus Eee Box B204 Manuel utilisateur

Dell

Dell Optiplex 9010 All In One Manuel utilisateur

Everex

Everex eXplora Manuel utilisateur

Lenovo

Lenovo ThinkCentre M75e Manuel utilisateur

Dell

Dell Alienware Area-51 R4 Manuel utilisateur

HP i2000 Instructions de montage

Manuels Ordinateur de bureau populaires d'autres marques